Cable Risers
kevhed72
Posts: 5,083
Anyone gots anything before I attempt to make some myself out if wood? Also, any recommendations on where to buy a quality black paint would be appreciated.... thanks
Comments
-
I use JMW wood risers but recently discovered these in Skip's smaller room at LSAF. You can order from him directly, if you wish. Here's a little bit more information about them...
https://listenup.com/products/audioquest-set-of-8-cable-lifters
As for that ever elusive black paint.....@masterpp is still wondering around, trying to find some. I wish the lad luck. Poor fella.
Tom
~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
I picked up the AQ Fog Lifters from Skip earlier this. I have been very happy with them. And you won’t find a better dealer!2 Channel Rosso Fiorentino Volterra II, 2 REL Carbon Limited, Norma Revo IPA-140B, Lumin U2 Mini, VPI Prime w/SoundSmith Zephyr MIMC, Modwright PH 150, Denon DP-59l w/Denon DL-301MKII, WAY Silver 3 Ana+ Speaker Cables, WAY Silver 4+ Interconnect Cables, AudioQuest Niagara 7000 w/Dragon and Hurricane Power Cables
-
-
Here's what I found it the garage...Im trying to use this wood somehow because I am super frugal.
-
Have you tried double-blind testing yet?
I think you should nail the cables into the tops. Just one nail, though. You still want to be able to bend the cable.
It is imperative that the nail pierce the positive conductor. This is so that RFI is siphoned off into the wood, where it can be harmlessly absorbed.I disabled signatures. -
Jesse @F1nut made some nice ones a while back. IIRC, he was think'n 'bout making a few for CP . . .AC Regenerator PS Audio PerfectWave Power Plant 10
Source Lumin U1 Mini into Lampizator Baltic 4 DAC
Pre Cary SLP-05
Power Rogue M180 Dark monos
Mains Salk HT2-TL
Rythmik F12 -
I use these, he has heavy duty ones for $10 more.
https://www.usaudiomart.com/details/649424376-cable-elevators-set-of-10-black/?utm_source=featured_ad&utm_medium=web&utm_content=category&utm_campaign=category-featured-ad-click&utm_term=649424376
He also has some new ones,
https://www.usaudiomart.com/details/649988456-suspension-cable-elevators-set-of-10/?utm_source=featured_ad&utm_medium=web&utm_content=category&utm_campaign=category-featured-ad-click&utm_term=649988456
Here's some more I found.
https://www.usaudiomart.com/details/649193101-10-cable-elevators-based-on-cardas-multi-blocks/Amplifiers: Norma IPA 140, MasterSound Compact 845, Ayre v6xe, Consonance Cyber 800
Preamp: deHavilland Ultraverve 3
Dac: Sonnet Morpheus 2, Musical Paradise mp-d2 mkIII
Transport: Jay's Audio CDT2 mk2, Lumin U1 mini
Speakers: Rosso Fiorentino Volterra II
Speaker Cables: Crystal Clear Magnum Opus 2, Organic Audio Organic Reference 2
Interconnects: Crystal Clear Magnum Opus 2, Argento Organic Reference 2, Argento Organic 2
Power Cables: Argento Organic Reference, Synergistic Research Foundation 10 and 12 ga.
Digital cables: Crystal Clear Magnum Opus 2 bnc, Tellurium Q aes, Silnote Audio Poseidon Signature 2 bnc
Puritan PSM156 -
Hmmmm.....
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
These are stupid expensive but I love the idea behind them, your cable can never fall off or tip over.
https://shunyata.com/products/accessories/mobius/ -
Agreed on both counts. I wanted them as soon as I saw them and then I saw the price.....for just ONE of them. Holy Smokes Batman!
*faints*
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
Right!
-
3d printer and some rubber bands... Maybe 10 bucks in material- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
-
You're HIRED!
I'll have my people contact your people and we'll make it happen.
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
Just need to buy a 3d printer- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
-
The good news is you could buy a 3d printer, material and buy hotel for polkfest and still be cheaper then one of the shunyata risers- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
-
Sir this is the silliest idea ever. Nails would never work!! Liquid nails would be the way to go to reduce the EMI that any nails would magnify through through the cable!Have you tried double-blind testing yet?
I think you should nail the cables into the tops. Just one nail, though. You still want to be able to bend the cable.
It is imperative that the nail pierce the positive conductor. This is so that RFI is siphoned off into the wood, where it can be harmlessly absorbed.
-
If you don't want to spend much money, just buy some rebar chairs.
-
https://www.usaudiomart.com/details/649424376-cable-elevators-set-of-10-black/
no affil
cheap enough to try out with little riskAC Regenerator PS Audio PerfectWave Power Plant 10
Source Lumin U1 Mini into Lampizator Baltic 4 DAC
Pre Cary SLP-05
Power Rogue M180 Dark monos
Mains Salk HT2-TL
Rythmik F12 -
These are stupid expensive but I love the idea behind them, your cable can never fall off or tip over.
https://shunyata.com/products/accessories/mobius/
That is ridiculous for what they are.
Bet you could make your own if you could find the bands.
-
I think the bands are what I use to pull the top of my hair back. Similar to these:
Post edited by Hermitism on -
https://www.usaudiomart.com/details/649424376-cable-elevators-set-of-10-black/
no affil
cheap enough to try out with little risk
Someone a few years ago gave some of those away, I was a recipient of a few. They're long gone but they were exactly like those. -
That is ridiculous for what they are.
Bet you could make your own if you could find the bands.
I'll be marketing a nonresonant cis-1,4 polyisoprene stabilzer designed
to prevent the Mobius cable riser from any potential lateral movement.
By implementing either one or two of these per Mobius you will greatly
increase your speaker dynamics. Two per Mobius are highly recommended.
These may be available direct or from select dealers in the future.
Estimated MSRP $99.00 each. Remember two per Mobius riser is highly recommend!
-
Going to chock that up as a great deal- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
-
In fairness, I have an assortment of insulators ready for such a purpose.
I bought them all at one garage sale for $10.00 about ten years ago. The old guy selling them
rolled his eyes when I told him why I was buying them.
-
Yea he rolled his eyes as he just realized he had WAY under priced them and forgot a few zeros......
-
He was asking $0.50 each. I got 21 for $10.00, He threw the last one in free.
They're not exactly a matching set.
The large one in the front (7" diameter at it's widest), best for a sub-woofer or an amp? -
I made these for myself and had some extras, which I sold here. I thought about making more to sell, but the material and labor cost was just too prohibitive to be worthwhile.
FYI, anyone selling cable lifters saying they will improve the sound is full of crap.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
You are correct. They do not improve the sound but they do prevent EMI/RMI and other electrical gremlins from being introduced into the signal.
I can say with full confidence that some of the cleanest sounding systems I have heard in my travels all had risers and excellent cable management.
Folks may or may not notice the difference. I happen to hear it.....or rather not hear the unwanted noise. What you hear is very slight.
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
There's always the nuclear option.
Don't raise the cable, lower the floor.
Franchises are still available. Call soon! -
I run mine thru the crawl space, works great!- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
https://www.youtube.com/watch?v=W83E0KBAmno
