Billet RD-0194/8 Tweeter Bezels

Options
2456

Comments

  • ESavinon
    ESavinon Posts: 3,067
    Options
    xschop wrote: »
    ESavinon wrote: »
    I'm going to need at least 16. (SDA 1.2TL, 3.1TL,1C, CRS+, RTA 15tl) I have to check on other pairs of speakers.

    Ed.

    Got you down.

    Have a question for you. Besides a larger sound stage presence of 3.1's, do you feel that the 15TLs have the same overall dynamics as the 3.1TL's?

    I have not made any direct comparisons since they're 2 completely different designs.
    The RTA 15tl based on their D'appolito design would have more dynamic range in my opinion.

    Ed
    SRT For Life; SDA Forever!

    The SRT SEISMIC System:
    Four main satellite speakers, six powered subs, two dedicated for LFE channel, two center speakers for over/under screen placement and three Control Centers. Amaze your friends, terrorize your neighbors, seize the audio bragging rights for your state. Go ahead, buy it; you only go around once.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    Final call for the year on these.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • msg
    msg Posts: 10,650
    Options
    Thanks for doing these, Rob. Bit the billet, too. Seems like a great addition to the standard upgrade paths.

    @F1nut - beautiful result with the anodizing. Takes these plates to another level. Could one send an order of plates to your anodizer? What color is that? Hopefully has some pretentiously audiophile-y name, and not just "Dark Grey", which would likely not impart any comparatively improved sonic quality, unlike the guarantee of the former.
    I disabled signatures.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Scott, sure anyone could send their plates to the place that did mine. It's the standard black anodizing, but I used a technique invented by another member to remove the tooling marks, which results in the silky smooth appearance.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    With flash.
    hfaob6eo6np5.jpg

    Without flash.
    0iauf0hfmuor.jpg

    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    I ordered an extra 10 plates to machine, including mine. If a set of 1.2's land on this homestead, no promises made. :)
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • Unknown
    Unknown
    edited October 20
    Options
    This content has been removed.
  • xschop
    xschop Posts: 5,853
    Options
    I told @dromunds to send it to you and ask @Toolfan66 how to use it.

    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • dromunds
    dromunds Posts: 10,174
    Options
    Soon come. Sent a PM to Toolfan, as soon as I get a reply I’ll be sending ‘er along.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    dromunds wrote: »
    Soon come. Sent a PM to Toolfan, as soon as I get a reply I’ll be sending ‘er along.

    I sent you a video. I found that using the Scotch-Brite Type A Very Fine pad was all that was needed. In other words, no need to use the course pad first.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    I polished one to a near-mirror finish before. Think I used 600 grit sponge pad by hand, then black rouge on buffing wheel.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • msg
    msg Posts: 10,650
    Options
    I like the 11Ts.
    I disabled signatures.
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • xschop
    xschop Posts: 5,853
    Options
    I can make them XS-11TL's ;)

    Got you down for a set.

    I'm still wondering why Polk didn't switch the MWs to 6516's in the 11TLs like they did for the 8TLs.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • Unknown
    Unknown
    edited April 2023
    Options
    This content has been removed.
  • xschop
    xschop Posts: 5,853
    Options
    I agree, must be bass-related. Out of the box the 6516's produce a better midrange than 6510's.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • dromunds
    dromunds Posts: 10,174
    Options
    It should arrive to Ivan tomorrow via express.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    Started work on these. I now have only 8 plates available.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    edited July 2023
    Options
    Sorry for the delay on these. I've PM'ed everyone that has chimed in for this batch.

    If I haven't replied, let me know

    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    I used the same diamond insert on this batch as I did for the seismic ball isolators.

    Very close to mirror finish...

    ppvfja7q1nm3.jpg


    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • Nesmith98
    Nesmith98 Posts: 225
    Options
    Nice work. Have you ever thought about machining the "Polk Audio" lettering on these?
    · Share on Facebook
  • Unknown
    Unknown
    Options
    This content has been removed.
  • xschop
    xschop Posts: 5,853
    edited July 2023
    Options
    ^^^Bingo^^^

    What @VR3 did with his lazer etching for the Monoliths build was the epitome of badging IMO.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    As of today I have 14 plates available.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    12 left for the year.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • F1nut
    F1nut Posts: 52,406
    Options
    Y'all need to buy these. So much better than the crappy stock plastic bezels.
    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    8 left
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook
  • mackdrool
    mackdrool Posts: 26
    Options
    A big shoutout to Rob for my plates! They look great! I've done nothing to these other than wipe them down before installing. I may anodize in the future but for now they will remain shiny and new!

    0plqdm426862.jpg

    uwt1034tuvhb.jpg

    nwt6nm9h009a.jpg

    7han7ddo0fa7.jpg


    · Share on Facebook
  • xschop
    xschop Posts: 5,853
    Options
    It's no secret, I prefer the brushed alloy look B)
    Your 3.1's look great.
    Don't take experimental gene therapies from known eugenicists.
    · Share on Facebook