PA450um Won't Pair Bluetooth

Options
kariedan44
kariedan44 Posts: 1
in Troubleshooting
I have a PA450um marine stereo For some reason it just says "pairing" for a while but nothing happens. I've tried to pair with several different phones but it just won't pair with any device.
I've tried setting resetting the PA450um defaults. I've turned on and off then on again the Bluetooth still nothing. The Bluetooth audio was working fine but just stopped. All the other functions work fine.
How does Bluetooth pairing break?
My IPhone never even sees the PA450um. I've even turned on then off and on again the Bluetooth on my phone.
· Share on Facebook

Answers

  • bigfordaz
    bigfordaz Posts: 1
    Options
    Having the same issue. Did you get a fix?
    · Share on Facebook
  • acagnacci
    acagnacci Posts: 1
    Options
    Any answers yet. I have same problem
    · Share on Facebook
  • ROUXTAB
    ROUXTAB Posts: 1
    Options
    Any answers yet? I am having same problem.
    · Share on Facebook
  • billbarker
    billbarker Posts: 1
    Options
    Same thing happens to me. I have no idea whats going on
    .
    · Share on Facebook
  • Grover3955
    Grover3955 Posts: 1
    Options
    I'm having the same problems, and had the radio replaced last year. Are there any fixes?
    · Share on Facebook
  • Bear68
    Bear68 Posts: 1
    Options
    Marine radio appears to pair but no sound
    · Share on Facebook
  • jvpark
    jvpark Posts: 1
    Options
    Mine was working fine, then no one could connect. I've checked setting up BT. It says pairing, but no one can see the Polk BT PA450.
    · Share on Facebook
  • sarch
    sarch Posts: 1
    Options
    Experiencing the same as above posts. Started the day by turning on the PA450um and no connection to iphone was made. Followed with everything tried above including resetting PA450 to default settings and starting fresh. Nada. Zip.
    Will try Polk early in the week to see if they can offer a fix.
    · Share on Facebook
  • Benjy
    Benjy Posts: 3
    Options
    Hi All,
    Is there any updated solution to this? I tried mailing the support guys at Asa Electronics, and their reply was such a generic lazy copy and paste response with instruction on reseting the unit to its defaults.
    This obviously did't work so they simply said "Then your bluetooth has failed". So many people are talking about this problem, surly there's some sort of solution since this is not a cheap product.
    · Share on Facebook
  • SeleniumFalcon
    SeleniumFalcon Posts: 4,359
    Options
    I recommend sending an email message to: Kim.Jasper@soundunited.com and explain the issue.
    · Share on Facebook
  • Benjy
    Benjy Posts: 3
    Options
    SeleniumFalcon wrote: »
    I recommend sending an email message to: Kim.Jasper@soundunited.com and explain the issue.

    Great thank you! I'll send a mail and hopefully post back a solution.
    · Share on Facebook
  • Benjy
    Benjy Posts: 3
    Options
    Unfortunately I have no good news because once again after explaining to Kim Jasper that ASA Electronics were not helpful at all, I receive this reply:

    "The PA450um is manufactured by ASA Electronics.
    Attached below is the contact link.
    They will be able to help."
    · Share on Facebook
  • allydrumpress
    allydrumpress Posts: 1
    Options
    Solved!!!! at least for my radio.. Like any electronic device sometimes it works to discharge all capacitors. This is done by removing power (turn boat battery off or pull fuse or pull power cord) and hold down the power button for over a full minute. After doing this I turned bluetooth off on my phone then turned the radio on and held down the dial to cause pairing and low and behold, the identifier showed up on my phone when I turned bluetooth back on. Ridiculous and pathetic that Polk or whoever can't come up with this tactic to at least try. Hope this helps someone.
    · Share on Facebook