Will this be anygood as a stop gap universal player?

Comments

  • rpf65
    rpf65 Posts: 2,127
    I think I read that model had an issue with randomly freezing up. Sony is supposed to be working on a firmware update, unless I got the model confused.

    For what it’s worth, I really liked the Panasonic 820. Picture quality was outstanding. For some reason it wouldn’t work with my particular tv, tried 3 of them. Ended up going with the Pioneer LX 500. Still think the Panasonic had a better picture, but the Pioneer is no slacker.
  • afterburnt
    afterburnt Posts: 7,892
    I was looking at the Sony because it does dvd-a and sacd
  • rooftop59
    rooftop59 Posts: 7,952
    afterburnt wrote: »
    I was looking at the Sony because it does dvd-a and sacd

    Does it need to play blu ray? You can get one of those for like $50 and then buy an older denon dvd-2910 pr 3910 or one of the universal pioneers. Heck I have a pioneer that I got for about $70 shipped on fleabay...
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room 5.1.4:
    Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra

    Bedroom 2.1
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • mhardy6647
    mhardy6647 Posts: 32,926
    edited October 2019
    Yeah, what @rooftop59 said: Music, video, or both?

    As y'all may or may not have noticed :p I've been using this abomination lately (100% for music discs) -- it plays both SACD and DVD-A (although not, apparently, at full resolution)... and -- best of all -- it was a freebie :)

    48976262107_fc1a755fcc_b.jpgDSC_7312 (2) by Mark Hardy, on Flickr

    I guess it is the same under the hood as the Toshiba SD-4960(??):

    amz3h8vw05rp.png



  • mantis
    mantis Posts: 17,032
    afterburnt wrote: »
    I have a Sony UBP-X700 chillin here that was only used for a few days. It's in the box and I can make you a great deal on it. It does everything the 800 does and it's very nice for the money.
    Dan
    My personal quest is to save to world of bad audio, one thread at a time.
  • gyosa
    gyosa Posts: 675

    Actually, most reviews I read , when I was in the market for one , said the x700 was THE one to get .....

    Bk

    mantis wrote: »
    afterburnt wrote: »
    I have a Sony UBP-X700 chillin here that was only used for a few days. It's in the box and I can make you a great deal on it. It does everything the 800 does and it's very nice for the money.

    Parasound A21 , Yamaha wxc-50 , Polk SDA 1c’s ( my first love .. ) , Kimber Kable 4TC, Sony 42” - BEDROOM

    B&K EX-442 ( it will go in my casket when I die ... ) , PS Audio 4.6 preamp ( old school , but it still jams on ... ) , Yamaha wxc-50 , Boston Acoustic voyager 7’s - POOL

    PS Audio Stellar S300 , Eversolo DMP-A8 , Yamaha wxc-50 , Kimber Kable 4vs , Salk Supercharged Song towers ( difficult choice between these and my family if I had to choose ... 😩 ) , Sony XBR-A8F 65” OLED - DEN , MAIN RIG

    Cambridge Audio 851n - sitting in the closet , for now

    Onkyo TX-nr609 , Polk atrium 7 , Boston acoustic sound ware (4) , Boston acoustic sub , B&W center , Sharp 65” TV - PATIO

    DAYENS AMPINO ( thanks Verb ! ) , KEiiD streamer ( this was only 60 bucks ?? ) , Polk atrium 8SDi’s - KID’s BEDROOM
  • skrol
    skrol Posts: 3,330
    I have the Denon DVD-2910 and it sounds very good but it did develop the issue where it wouldn't read many redbook CD's. I replaced the pickup and it is better but I need to align it better.

    I also have the Denon DBP-1611UD and the Marantz UD5005. These units are identical internally. These both play blu-ray.

    I would say the DVD-2910 has better analog output but I don' t believe it will send SACD over the HDMI. The Denon DBP-1611UD and the Marantz UD5005 do. If you are into mods, the DVD-2910 has a following on DIYAudio.com to improve the analog out and other stuff.
    Stan

    Main 2ch:
    Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.

    HT:
    Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60

    Other stuff:
    Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601
  • afterburnt
    afterburnt Posts: 7,892
    mantis wrote: »
    afterburnt wrote: »
    I have a Sony UBP-X700 chillin here that was only used for a few days. It's in the box and I can make you a great deal on it. It does everything the 800 does and it's very nice for the money.

    PM sent. Does it do DVD-A? I don't see it listed on the Sony site
  • afterburnt
    afterburnt Posts: 7,892
    @rooftop59 @mhardy6647 yeah blew ray I have a bunch of audio discs
  • rooftop59
    rooftop59 Posts: 7,952
    afterburnt wrote: »
    @rooftop59 @mhardy6647 yeah blew ray I have a bunch of audio discs

    Okay I see. Maybe a marantz if Dans deal falls through?

    Something like this: https://www.ebay.com/itm/Marantz-UD5007-UD-5007-Blu-Ray-Disc-DVD-CD-Player-free-shipping/264486810822?hash=item3d94a474c6:g:Z04AAOSw07ddloxF
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room 5.1.4:
    Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra

    Bedroom 2.1
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • afterburnt
    afterburnt Posts: 7,892
    @rooftop59 it kinda should be 4k since that's the tv it will be hooked up to for now
  • rooftop59
    rooftop59 Posts: 7,952
    Are the blu rays 4K? That really limits you options! Good luck!
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room 5.1.4:
    Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra

    Bedroom 2.1
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • afterburnt
    afterburnt Posts: 7,892
    rooftop59 wrote: »
    Are the blu rays 4K? That really limits you options! Good luck!

    I think I have 1 4k movie but it's a 4k tv so... I wonder if they make 4k audio? That would rule!
  • pitdogg2
    pitdogg2 Posts: 24,474
    2910 will not do SACD or DVD-A over HDMI it will do the Denon-link which is all digital if you have the appropriate Denon receiver. I LOVED my 3805 with the 3910 and the Denon-link. it was ahead of its time back in the day.
  • afterburnt
    afterburnt Posts: 7,892
    edited October 2019
    afterburnt wrote: »
    mantis wrote: »
    afterburnt wrote: »
    I have a Sony UBP-X700 chillin here that was only used for a few days. It's in the box and I can make you a great deal on it. It does everything the 800 does and it's very nice for the money.

    PM sent. Does it do DVD-A? I don't see it listed on the Sony site

    Even if it doesn't maybe I can grab it for my buddy that I am trying to kick down the rabbit hole? he disappointed me though, he had me order cherry 703's for him. He ain't the unibummer but he doesn't do tech lol. I was gonna order him a bunch more stuff to get him started and sing the blues about how he has to pay me for the stuff.
  • mhardy6647
    mhardy6647 Posts: 32,926
    edited October 2019
    pitdogg2 wrote: »
    2910 will not do SACD or DVD-A over HDMI it will do the Denon-link which is all digital if you have the appropriate Denon receiver. I LOVED my 3805 with the 3910 and the Denon-link. it was ahead of its time back in the day.

    It (the no HDMI output for the hires audio formats) is/was an anti-piracy feature as I understand it. :#


  • pitdogg2
    pitdogg2 Posts: 24,474
    mhardy6647 wrote: »
    pitdogg2 wrote: »
    2910 will not do SACD or DVD-A over HDMI it will do the Denon-link which is all digital if you have the appropriate Denon receiver. I LOVED my 3805 with the 3910 and the Denon-link. it was ahead of its time back in the day.

    It (the no HDMI output for the hires audio formats) is/was an anti-piracy feature as I understand it. :#


    yes was not anymore. Sony for years refused to let all the manufactures implement it, but now there are against the analog side more than ever it seems. It your player had component video input and output many were disabled with a firmware upgrade.

    Denon-link was 100% digital and all bass management was kept in the digital realm.
  • mhardy6647
    mhardy6647 Posts: 32,926
    not surprising. Analog was the last bastion of piracy (not that I am advocating bootlegging -- I am just saying).

  • afterburnt
    afterburnt Posts: 7,892
    Ended up getting it for $199.00. So far so good, it upscales video nicely and the sound is better than the little Sony player that I was running. This one is physically much more substantial than the other Sony plsyers that I have had, those were built like cheap toys. I have it in a decent temporary system so when I have time I will listen to some SACD's etc. Aand see how it does. Somewhere down the road this will be a movie player reserving my Oppo or Cambridge for just music.???
  • afterburnt
    afterburnt Posts: 7,892
    https://youtu.be/3KJKWzvhPXc tend to agree but I ain't h5HD eyes for yeas
  • SCompRacer
    SCompRacer Posts: 8,350
    edited November 2019
    Want I2S (PCM) and SACD (DSD) out of a CD player? Just get a data sheet for the DAC chip and find the appropriate DAC chip outputs. Solder some wires to them....best to keep them very short to the DAC. This is on a Denon 3910 with PCM1796 chip. BCK, LRCK, DATA and ground. SCK for SACD bit clock.

    With the 1796 chip, DSD used some of the I2S circuits so I had to add a switch to rear of Denon to switch between exporting PCM and SACD. SACD has R and L channel separate where PCM has R&L combined.

    3ws3vwfv3abu.jpg

    vzjk16aflhwn.jpg

    Post edited by SCompRacer on
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • headrott
    headrott Posts: 5,484
    Agree with Rich. I tapped the DSD in the DVD-5910 and output to the DAC I built. I haven't heard a better DSD (SACD) player/DAC combo. The DVD-5910 (and 3910) won't do Blu-Ray of course, so it's not a true universal player, but maybe get an OPPO 205 player for that?? I have an OPPO but it's still sealed in the box awaiting to be released. It uses the same DAC board in the DAC I built, so I figure it can wait.

    Tap your player and send it to a DAC for PCM and DSD. Then use the rest for video.
    Relayer-Big-O-Poster.jpg
    Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
    "I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion." :\
    My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....


    "Green leaves reveal the heart spoken Khatru"- Jon Anderson

    "Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee