Another Vanilla problem

iPad Mini issue that started yesterday. Previouly, if I reply to a thread the thread would shift up, the keyboard would be at the bottom, and the reply area would be above the keyboard. Now the thread does not shift up, and the keyboard covers the reply area for typing. So you can’t see what you are typing.

What is the problem with Vanilla? The world’s worst software.
Lumin X1 file player
Sony XA-5400ES SACD
Pass XP-22 pre, X600.5 amps
Magico S5 MKII Mcast Rose speakers, SPOD spikes

Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
«1

Comments

  • BlueFox
    BlueFox Posts: 14,415
    This is the issue. Before the reply.

    po2pl1eflwrx.png


    Trying to reply.

    1qdmy5g98zcr.png
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • rooftop59
    rooftop59 Posts: 7,153
    Has also been happening on my iPhone 7 Plus. Like right now.
    Living Room 2.1: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Musical Fidelity A308; NAD M51 DAC; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room HT: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 700 x3; Definitive Technology StudioMonitor 350; Definitive Technology ProMonitor 800; Sub - HSU VTF-2 MK5
    Master Bedroom
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • BlueFox
    BlueFox Posts: 14,415
    Great. I was wondering if it was operator error. Sure wish I could see what I am typing. :)
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • rooftop59
    rooftop59 Posts: 7,153
    It has made me pay more attention to what I’m typing...and go back and make corrections...
    Living Room 2.1: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Musical Fidelity A308; NAD M51 DAC; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room HT: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 700 x3; Definitive Technology StudioMonitor 350; Definitive Technology ProMonitor 800; Sub - HSU VTF-2 MK5
    Master Bedroom
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • mhardy6647
    mhardy6647 Posts: 27,347
    rooftop59 wrote: »
    It has made me pay more attention to what I’m typing...and go back and make corrections...

    guess the EDIT button came back to life just in time! :)

    (in fairness, the PREVIEW button can be useful, too)

  • BlueFox
    BlueFox Posts: 14,415
    What a PITA.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • nooshinjohn
    nooshinjohn Posts: 22,909
    I think paraphrasing from Apollo 13 fits well here...

    buns5xzldzjc.jpg
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    “Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • msg
    msg Posts: 6,449
    You can't scroll up?
    I disabled signatures.
  • BlueFox
    BlueFox Posts: 14,415
    msg wrote: »
    You can't scroll up?

    Nope. No way to get the reply area viewable like before. If you full screen on the reply then that works.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • msg
    msg Posts: 6,449
    You know what I hate? Change for the sake of change. Change that doesn't really offer any benefit. It pretty much always just jacks stuff up.
    I disabled signatures.
  • BlueFox
    BlueFox Posts: 14,415
    Especially when the software is being changed by amateurs. :)
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • treitz3
    treitz3 Posts: 14,412
    Bunch O' damned whiners....

    Get a real phone and this won't happen!

    Can you point me to one, please?

    Tom
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    ~ The best way to enjoy digital music reproduction is to never listen to good analogue reproduction ~

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    ~ When the law ends, tyranny begins ~
  • BlueFox
    BlueFox Posts: 14,415
    This also affects the iPad.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • treitz3
    treitz3 Posts: 14,412
    Well, then. Get a real pad too, Bud. Depends makes a good one....or so I hear from Russ.

    (Talk to him about that...)

    Not Trey
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    ~ The best way to enjoy digital music reproduction is to never listen to good analogue reproduction ~

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    ~ When the law ends, tyranny begins ~
  • nooshinjohn
    nooshinjohn Posts: 22,909
    treitz3 wrote: »
    Well, then. Get a real pad too, Bud. Depends makes a good one....or so I hear from Russ.

    (Talk to him about that...)

    Not Trey

    Russ doesn't wear Depends any more. No need now that San Franshitsgo has a poo patrol to clean up after him.
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    “Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • mhardy6647
    mhardy6647 Posts: 27,347
    msg wrote: »
    You know what I hate? Change for the sake of change. Change that doesn't really offer any benefit. It pretty much always just jacks stuff up.

    That is a big piece of the modern technology mandate.
    If it ain't broke, break it.
    Looks like that particular bon mot dates to 1992 (?!)

    hcvu45wtlfaw.png

    Every few weeks, Office 365 "apps" change in their look, feel and (to some extent) functionality. It adds no value. In fact, besides having to get used to it, I sometimes need to turn off stuff that has turned itself back on (which I used to have turned off), or lost an easy way to do something I did before. P!$$es me off.

    ik2oq1h6euaw.png

    Continuous improvement change is the closest thing to "job security" in the tech industry (industries) in the twenty-teens.
  • txcoastal1
    txcoastal1 Posts: 11,591
    Maybe you need a maxi pad
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
  • BlueFox
    BlueFox Posts: 14,415
    Seems to be working now (Tuesday), at least on the iPad. First post I have made in a while because of this bug.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • rooftop59
    rooftop59 Posts: 7,153
    Still a prob on my iPhone
    Living Room 2.1: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Musical Fidelity A308; NAD M51 DAC; Sony UBP-x1000es; Squeezebox Touch with Bolder Power Supply
    Game Room HT: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 700 x3; Definitive Technology StudioMonitor 350; Definitive Technology ProMonitor 800; Sub - HSU VTF-2 MK5
    Master Bedroom
    Cambridge Azur 551r; Polk RT25i; ACI Titan Subwoofer
  • nooshinjohn
    nooshinjohn Posts: 22,909
    Vanilla is still a problem.. PERIOD!
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Statement V2 cartridge and Origin Conqueror Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    “Every record has been destroyed or falsified, every book has been rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered…History has stopped. Nothing exists except the endless present in which the party is always right” — George Orwell

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
  • agfrost
    agfrost Posts: 2,341
    BlueFox wrote: »
    Especially when the software is being changed by amateurs. :)

    Hey, hey now...

    Let's not be so quick to rule out drunken professionals.
    Jay
    SDA 2BTL * Musical Fidelity A5cr amp * Marantz DV-9500 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
    Micro Seiki DQ-50 * A hodgepodge of cabling * Belkin PF60
    Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
  • steveinaz
    steveinaz Posts: 19,366
    nbdksjlrn,mf e,rnfr lwc ewjmr nkjwfn;lrwmkglerm;kj;hewflihfuhegou.5uy08680-uhlihl







    ...kidding, mine works fine.
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amplifier: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi
  • BlueFox
    BlueFox Posts: 14,415
    BlueFox wrote: »
    Seems to be working now (Tuesday), at least on the iPad. First post I have made in a while because of this bug.

    I take this back. It is okay on a full size iPad, but still FUBAR on a mini.

    Ken, do something. Fix this.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • mhardy6647
    mhardy6647 Posts: 27,347
    edited February 2019
    BlueFox wrote: »
    ...
    Ken, do something. Fix this.

    h9v7l62323e2.png


    ;)





  • If some kind soul could give me a summary of what the problem is I'll be happy to bring it to Vanilla's attention.
  • Hermitism
    Hermitism Posts: 3,548
    Here's a problem from the last ten minutes. I couldn't get on the forum.

    fk14ropf3nmf.jpg
  • mhardy6647
    mhardy6647 Posts: 27,347
    heh, you beat me to it :)

    Maybe a good sign -- maybe the gnomen are scurrying around gnomenating or whatever its called, bring us a bigger, better Vanilla.

    x7vnozhcvzmt.png

    It'd make a good avatar, come to think of it...
  • mhardy6647
    mhardy6647 Posts: 27,347
    ^^^ Whoa, that's in color.
    It's like The Wizard of Oz after Dorothy gets to Oz.

    v5nh5tdv9qc0.png


  • BlueFox
    BlueFox Posts: 14,415
    If some kind soul could give me a summary of what the problem is I'll be happy to bring it to Vanilla's attention.

    See the first two posts.
    Lumin X1 file player
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!