Two PAIRS of Carver Platinums in a Sunfire!

2»

Comments

  • nguyendotnguyendot Posts: 3,587
    Sorry to revive this, but I picked up a pair of Amazings today and they're mismatched. One has 2x30" ribbons (yellow) and one has 1x60" silver. Both have they honeycomb woofers.

    The 2x30" ribbons are very muted. The woofers don't seem to play at the same level. It looks like someone messed with the crossovers and they're not wired correctly. Does anyone have a wiring diagram for the crossover?
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • motorhead43026motorhead43026 Posts: 3,105
    edited October 2017
    Amazing Jordan Carvers :p
    2 channel: Anthem 225 Integrated amp; Parasound Ztuner; TechnicsTT SL1350; Vincent PHO-8 phono pre; Marantz CD6005 spinner; Polk SDA2BTL's; Cables ZU Mission IC's, SC and power cords, all into a PS Audio Dectet Power center.

    All TV's sound enhanced by Polk Magnfi Mini's.

    Other; S60'S, M10 series II, M7C's, Hafler XL600 amp, RB-980BX, Parasound HCA-1500 amp , P5 preamp, all in storage. All speakers have had crossover rebuilds, resulting in a small fortune invested in Sonicaps, and tweeter upgrades.

    Political memes posted as fact and accepted as fact, are sign language of the ignorant, for the ignorant

    tonyb said " but even socialists can do a good thing here and there

    Social media makes dumb people dumber and smart people dumb then dumber.
  • SCompRacerSCompRacer Posts: 7,053
    Three schematics in the manual I have....

    Date '86 schematic

    hcu5di35yadk.jpg

    Date '89 Platinum

    yarngci2w30x.jpg

    jd1dqttnc8a2.jpg

    Date '89 Silver

    3m2kcc7graut.jpg

    44502ttkc61d.jpg








    Make yourself necessary to someone. Ralph Waldo Emerson

    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ & Pro 11+ * Signature Series Sonore Music Server w/Deux PS* Twisted Pear Buffalo III Dual Mono ESS Sabre32 DAC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *

  • nguyendotnguyendot Posts: 3,587
    I will try to read this and look at the crossovers. I feel someone tried to hot-rod these or had no idea what they're doing. The woofers seem to come off the same terminals as the input on the crossover which doesn't make sense. I have no idea how to read a schematic but I should be able to make due. I'll take pics.
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • F1nutF1nut Posts: 41,277
    There's a lot of things about those speakers that doesn't make sense.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • xschopxschop Posts: 999
    The truth ranger rides again lol.
    On a serious note, it would be nice to see them resto/modded. I'll be watching this project and hope to see it brought to fruition.
  • nguyendotnguyendot Posts: 3,587
    I'll gauge how much work itll take. If not I'm going to part them out or resell them. They're huge and I can't store them easily.
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • nooshinjohnnooshinjohn Posts: 19,607
    Just FYI... my project died a while ago, as the cost of the parts far exceeded the value of just buying a pair that already worked.
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-65, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB700/800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

  • xschopxschop Posts: 999
    Are you referring to the Carvers or the Sunfire?
  • nooshinjohnnooshinjohn Posts: 19,607
    The sunfire is the car used to haul them. We still have it. B)
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-65, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB700/800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

  • nguyendotnguyendot Posts: 3,587
    They for the most part work, i think the crossover needs rewired but who knows.
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • F1nutF1nut Posts: 41,277
    So, the original Amazings with the two ribbons are 4 ohm and the later Platinum series with the 60" ribbons are 8 ohm. I therefore do not believe one can use a 60" ribbon in the original Amazings nor can one use the honeycomb woofers in the Plats.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • mikeyb128mikeyb128 Posts: 2,814
    The sunfire is the car used to haul them. We still have it. B)

    From a sunfire to Demon..... sweeet upgrade :sunglasses:
    2 channel:
    Bryston 4B3, Bryston BDA3, Cary SLP05, Shanling CDT1000SE with parts conneXion level 2 mods, Nottingham analogue ace space 294, soundsmith Carmen MKii, Zu DL103 MKii, Ortofon MC 20 MKii, Dynavector XX2 MKii, Rogue Audio Ares, Core power technologies balanced power conditioner, Akiko Corelli power conditioner with Akiko Audio HQ power cable, Nordost heimdall 2, Frey 2, interconnects, speaker and power cables, Focal Electra 1028 BE 2, Auralic Aries Femto, Black diamond racing cones, ingress audio level 1 roller blocks, JL Audio E110 with Auralic subdude, Primacoustics room treatments.
    Theater:
    Focal Aria 926,905,CC900, SVS PB ultra x2. Pioneer Elite SC85, Oppo BDP93, Panamax M5400PM, Minix neox6, Nordost Blue heaven LS power cables.

  • nguyendotnguyendot Posts: 3,587
    F1nut wrote: »
    So, the original Amazings with the two ribbons are 4 ohm and the later Platinum series with the 60" ribbons are 8 ohm. I therefore do not believe one can use a 60" ribbon in the original Amazings nor can one use the honeycomb woofers in the Plats.

    Someone either bought two different ones or they hacked these up. My best bet might be to part them out then. The 60" tweeter sounds awesome. The 30" ones sound terrible but I'm thinking someone literally just ran random wires to them.
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • nooshinjohnnooshinjohn Posts: 19,607
    mikeyb128 wrote: »
    The sunfire is the car used to haul them. We still have it. B)

    From a sunfire to Demon..... sweeet upgrade :sunglasses:

    I drive a Jaguar XJ now. The Sunfire collects dust because my wife can't sell her first car.
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-65, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB700/800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

  • xschopxschop Posts: 999
    Watch those fuel lines on the Sunfire. That car can quickly earn it's name. I test-drove an XJ with a cammed LT1 back in the day. He could never get enough rear tire unless he tubbed it.
  • ALL212ALL212 Posts: 1,010
    Tell me more of your ribbons. I’ve rebuilt silvers and know of two places that are refurbing ribbons. But I might be in the market for the 60.
    Aaron
    Enabler Extraordinaire
  • tonybtonyb Posts: 30,780
    I just can't figure out with a new baby how you have the time to consider a project that big.
    HT SYSTEM-2 channel
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Dynaudio Audience 72
    Polk FX500 surrounds
    Cary xciter dac
    Cullen modded Sonos
    Joule la-100 pre
    B&k Ref 4420 amp

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Analysis plus crystal oval ic's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    B&k 1430
    Tad 803 speakers
  • pitdogg2pitdogg2 Posts: 12,613
    tonyb wrote: »
    I just can't figure out with a new baby how you have the time to consider a project that big.

    Tony Johns project was several years ago. This was resurrected nguyendot.
  • nooshinjohnnooshinjohn Posts: 19,607
    pitdogg2 wrote: »
    tonyb wrote: »
    I just can't figure out with a new baby how you have the time to consider a project that big.

    Tony Johns project was several years ago. This was resurrected nguyendot.

    Take it easy on Tony... he's a Bears/Cubs fan....
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Pioneer Elite SC-65, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB700/800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

  • nguyendotnguyendot Posts: 3,587
    pitdogg2 wrote: »
    tonyb wrote: »
    I just can't figure out with a new baby how you have the time to consider a project that big.

    Tony Johns project was several years ago. This was resurrected nguyendot.

    I have the new baby. Like literally a week old. Refurbing some KP-201 horns too (industrial Heresy IIs).

    And picked up a few new receivers from Magnolia in the past 2 weeks.
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
  • pitdogg2pitdogg2 Posts: 12,613
    nguyendot wrote: »
    pitdogg2 wrote: »
    tonyb wrote: »
    I just can't figure out with a new baby how you have the time to consider a project that big.

    Tony Johns project was several years ago. This was resurrected nguyendot.

    I have the new baby. Like literally a week old. Refurbing some KP-201 horns too (industrial Heresy IIs).

    And picked up a few new receivers from Magnolia in the past 2 weeks.

    My bad I'm sorry Tony call off waste management.....palease B)

    Congrats on the new rugrat o:) <3
2»
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!