Vintage Monitor and SDA Speaker Deals
Options
Comments
-
Thanks. As my rotten luck would have it I ran across a peachy set of Monitor 7's with SL2000 drivers. I think I read here Polk is out of stock on the RD0194-1's for a while. Talk about Murphy giving a guy the finger?
-
littlewoodboats wrote: »Thanks. As my rotten luck would have it I ran across a peachy set of Monitor 7's with SL2000 drivers. I think I read here Polk is out of stock on the RD0194-1's for a while. Talk about Murphy giving a guy the finger?
Here you go...
http://forum.polkaudio.com/discussion/166071/polk-rd-0194-pair#latest
-
Say what?
All mid drivers have been replaced with new Silver Flute drivers (recommended upgrade)
http://toledo.craigslist.org/ele/4884231753.htmlPOLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1 -
Highly recommended by whom I wonder.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
Say what?
All mid drivers have been replaced with new Silver Flute drivers (recommended upgrade)
http://toledo.craigslist.org/ele/4884231753.html
Good only if you listen to flute.
Klipsch RB81, KG3.5, B&W DM602.5, Polk.
Subwoofers: Klipsch RW10, Triad ProSub Bronze. -
Ignorance is blissHome Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
a couple of ads from the Atlanta area cl- don't know if they are good prices though
RTA 15T
http://atlanta.craigslist.org/nat/ele/4885751741.html
RTA 12
http://atlanta.craigslist.org/sat/ele/4859900519.htmlSpeakers: Polk SDA-SRS xovers rebuilt by David, RDO194's, Dynamat, BH5, glued magnets, new cloth, custom aluminum terminal plates with Cardas posts and Speakon interconnect
Speaker Cables, Jumpers & Interconnect: DIY Douglas Connection
Power Amp: Sunfire Architect's Choice Series II
Preamp: Adcom GFP-750
SACD/CD: Oppo BDP-95
Tuner: Sansui TU-717
TT: Technics SL-MA1
Phono Pre: Emotiva XPS-1
Music Server: Mac Mini w/JRiver - iPad w/JRemote
DAC: Eastern Electric MiniMax Plus
Other Polks: SDA: 1A, 1C, 2B, CRS+ / Monitor: 10A, 5jr, 4 / RT5 -
a couple of ads from the Atlanta area cl- don't know if they are good prices though
RTA 15T
http://atlanta.craigslist.org/nat/ele/4885751741.html
RTA 12
http://atlanta.craigslist.org/sat/ele/4859900519.html
Very decent prices on both IMHO.... The 15's though are NOT my favorite RTA, thats the RTA 11TL lol.... I dont think I'd do a straight trade for the 15's, but for someone with the right room (big and enough room to pull them forward a bit) the 15's may be what your looking for...
"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963) -
I paid $200 for my RTA 12c's. Decent price.HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.
Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's
Additional projects: RTA 12c's -
Those 12's look like garbage, if I'm honest.
They were abused with a clipped signal at some point in their life, the original 12's without the little bottom stands on them and vertical tweeters came with Peerless and these have been replaced with SL2000's. Also looks like one of the midwoofers has been incorrectly replaced with one of the real old Monitor line midwoofers.afterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
Those 12's look like garbage, if I'm honest.
They were abused with a clipped signal at some point in their life, the original 12's without the little bottom stands on them and vertical tweeters came with Peerless and these have been replaced with SL2000's. Also looks like one of the midwoofers has been replaced with one of the real old Monitor line midwoofers.
Yes, not 'very good condition' as stated in the ad.
No risers, replaced tweeter, one woofer plus not tweeter dispersion hat...
Very good condition looks like my old pair:
Klipsch RB81, KG3.5, B&W DM602.5, Polk.
Subwoofers: Klipsch RW10, Triad ProSub Bronze. -
Afaik, not all rta12 came with risers. My original pair didn't have any and there were no signs they ever did.
Yeah the original RTA-12's with vertical Peerless didn't have risers, they had mini metal stands. They also weren't mirror imaged.
I was just getting at these aren't worth $200 and the seller is misrepresenting their condition as very good when they have incorrectly replaced parts on them and don't really look the best.afterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
Crs+'s with stands n IC cord. So So of a deal to someone looking for em. Not mine. http://m.ebay.com/itm/301531324595?_mwBanner=1..
..
..
Randy/Maine -
Looks like the early (1986) version CRS+'s with the blade/blade IC. IMHO not too bad a price with the stands and IC. I've been searching for quite awhile for stands for my CRS+'s.Speakers: Polk SDA-SRS xovers rebuilt by David, RDO194's, Dynamat, BH5, glued magnets, new cloth, custom aluminum terminal plates with Cardas posts and Speakon interconnect
Speaker Cables, Jumpers & Interconnect: DIY Douglas Connection
Power Amp: Sunfire Architect's Choice Series II
Preamp: Adcom GFP-750
SACD/CD: Oppo BDP-95
Tuner: Sansui TU-717
TT: Technics SL-MA1
Phono Pre: Emotiva XPS-1
Music Server: Mac Mini w/JRiver - iPad w/JRemote
DAC: Eastern Electric MiniMax Plus
Other Polks: SDA: 1A, 1C, 2B, CRS+ / Monitor: 10A, 5jr, 4 / RT5 -
Oh. I didnt notice that. If its blade blade would that be CRS+'s ? Im not too fimiliar with the CRS's. Just my model. I was thinking single tweets were +'s. Am i wrong ?..
..
..
Randy/Maine -
3rd Generation CRS+s.boston1450 wrote: »Oh. I didnt notice that. If its blade blade would that be CRS+'s ? Im not too fimiliar with the CRS's. Just my model. I was thinking single tweets were +'s. Am i wrong ?
Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
too muchPOLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
PIONEER PL-510A SONY BDP S5100
POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1 -
http://delaware.craigslist.org/ele/4856392520.html
I can't tell if they're RT12s or RT16s.
Seems an acceptable price for those near them in the mid-atlantic area -
http://delaware.craigslist.org/ele/4856392520.html
I can't tell if they're RT12s or RT16s.
Seems an acceptable price for those near them in the mid-atlantic area
RT16's looking at the dimensions.
Klipsch RB81, KG3.5, B&W DM602.5, Polk.
Subwoofers: Klipsch RW10, Triad ProSub Bronze. -
Monitor 10's in the Tampa bay area. Seems like a fair price.
http://tampa.craigslist.org/hdo/ele/4893114807.htmlSpeakers: Polk SDA-SRS xovers rebuilt by David, RDO194's, Dynamat, BH5, glued magnets, new cloth, custom aluminum terminal plates with Cardas posts and Speakon interconnect
Speaker Cables, Jumpers & Interconnect: DIY Douglas Connection
Power Amp: Sunfire Architect's Choice Series II
Preamp: Adcom GFP-750
SACD/CD: Oppo BDP-95
Tuner: Sansui TU-717
TT: Technics SL-MA1
Phono Pre: Emotiva XPS-1
Music Server: Mac Mini w/JRiver - iPad w/JRemote
DAC: Eastern Electric MiniMax Plus
Other Polks: SDA: 1A, 1C, 2B, CRS+ / Monitor: 10A, 5jr, 4 / RT5 -
^^ if those were local I'd be on them ^^ always wanted some 10's. ...Even though I've put myself on speaker/component moratorium for the time being...VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
Polk SDA1c modded
Polk CRS+ 4.1TL modded (need veneer)
Polk SDA2BTL (fully modded)
A/L 1000VA Dreadnought Canare 4s11 SDA cable
SACD Marantz DV8300
Sony S9000ES CD/DVD/SACD
Yamaha YP-D6
Soundcraftsmen PCR800
Audible Illusions L1 Preamp
Vincent MFA based Cocci Tube Preamp
Pho-700 Phono Pre
Signal Cable Silver Resolution IC's -
Oh come on Ed, you know you want them
Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
LOL David!! I know!! That's the trouble with self-imposed moratoriums!! VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
Polk SDA1c modded
Polk CRS+ 4.1TL modded (need veneer)
Polk SDA2BTL (fully modded)
A/L 1000VA Dreadnought Canare 4s11 SDA cable
SACD Marantz DV8300
Sony S9000ES CD/DVD/SACD
Yamaha YP-D6
Soundcraftsmen PCR800
Audible Illusions L1 Preamp
Vincent MFA based Cocci Tube Preamp
Pho-700 Phono Pre
Signal Cable Silver Resolution IC's -
HTAVR-Pioneer SC99XPA-DR3 Differential Reference AmpPolk R-700Rear- RT150Side- RT150Center-CSi5Sub-Rythmik audio F25Player- Panasonic DP-UB9000Projector- Optoma CinemaX P2Screen- Silver Ticket Products STR Series 6 120"Audio Room 2ch rig.Cary AE-3, Onkyo M-504, Marantz SA8005, Azur 851NWharfedale - Linton, SVS SB12-NSDMinis Forum PC (streamer) and Panamax MX5105Headphone rig;Schiit JOTUNHEIM and different headphones.Samsung 42" flat screen TV.
-
Id pick up either the 10s or sda 2As for my garage for $100.00. I never see deals like that around here.
-
$400 for Monitor 7's? Yikes. Cabinets must be full of expensive Mundorf or Sonicaps.
http://denver.craigslist.org/ele/4904953976.htmlafterburnt wrote: »They didn't speak a word of English, they were from South Carolina.
Village Idiot of Club Polk -
-
Just saw these this morning on the Northern N.J C/L I haven't a clue what they are worth but this is the place to post.
http://newjersey.craigslist.org/ele/4833657831.html2chl- Adcom GFA- 555-Onkyo P-3150v pre/amp- JVC-QL-A200 tt- Denon 1940 ci cdp- Adcom GFS-6 -Modded '87 SDA 2Bs - Dynamat Ext.- BH-5- X-Overs VR-3, RDO-194 tweeters, Larry's Rings, Speakon/Neutrik I/C- Cherry stain tops Advent Maestros,Ohm model E
H/T- Toshiba au40" flat- Yamaha RX- V665 avr- YSD-11 Dock- I-Pod- Klipsch #400HD Speaker set-
Bdrm- Nikko 6065 receiver- JBL -G-200s--Pioneer 305 headphones--Sony CE375-5 disc -
Those are the cleanest SDA-1s I've ever seen, and looks like the have real Walnut Veneer too.leftwinger57 wrote: »Just saw these this morning on the Northern N.J C/L I haven't a clue what they are worth but this is the place to post.
http://newjersey.craigslist.org/ele/4833657831.html
Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
dhsspeakerservice.com/ -
The only problem is you will not find that I/C on ebay or anywhere?? Maybe under a rock.westmassguy wrote: »
Those are the cleanest SDA-1s I've ever seen, and looks like the have real Walnut Veneer too.leftwinger57 wrote: »Just saw these this morning on the Northern N.J C/L I haven't a clue what they are worth but this is the place to post.
http://newjersey.craigslist.org/ele/4833657831.html
Jim
