Polk Audio
Home› Vintage Speakers

Super Score today... ;-)

MysteryMystery Posts: 2,462
edited July 2014 in Vintage Speakers
20140712
Got SDA-CRS+ with original stands real cheap from original owner.
He moved them all the way from Massachusetts and lost the interconnect cable.
I know whom to contact for that. Hint hint Larry... :wink:

Also missing are spikes on the stands.
Look good except few knicks and scratches on veneer.
Mid drivers move in/out freely.
Haven't tested them yet but PO said they work fine.

Oh, he also had a pair of JBL 2600 and Acoustic Research AR 206 HO bookshelves for sale.
Didn't need them but what the hell, I have so many already so got them as well.


attachment.php?attachmentid=99465&d=1405230145
attachment.php?attachmentid=99464&d=1405230145

DSC01123-small.jpg

DSC01122-small.jpg

Sonus Faber Concerto Grand Piano, Klipsch Heresy, Epicure 20+,T/E 280, Polk 4,4.5,5A.
DB Plus 880, AR 48S, Smaller Advents. SUBs: Monitor Audio. Pre: HK AP2500, C1, Tandberg 3002A.
Amps: BB275, Crown XLS1500, QSC, Rotel, Luxman R-114, Nakamichi...
Post edited by Mystery on
· Share on TwitterShare on Facebook

Comments

  • cnhcnh Posts: 13,310
    edited July 2014
    Very nice!

    Regarding those JBL 2600s, I have a pair. Those titanium domes won't do you any favors and they have an UNBELIEVABLY HIGH FAILURE rate because there is a flaw in their construction!

    Replace them with a pair of these partsexpress Vifas and you'll be surprised at how much better they'll sound!

    http://www.parts-express.com/vifa-bc25sc06-04-1-textile-dome-tweeter--264-1028

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
    · Share on TwitterShare on Facebook
  • F1nutF1nut Posts: 45,049
    edited July 2014
    Nice haul.
    I know whom to contact for that. Hint hint Larry...

    Larry doesn't make cables.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on TwitterShare on Facebook
  • leroyjr1leroyjr1 Posts: 8,799
    edited July 2014
    Nice score.
    · Share on TwitterShare on Facebook
  • NightfallNightfall Posts: 9,290
    edited July 2014
    Those CRS look great! How much is real cheap?
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
    · Share on TwitterShare on Facebook
  • boston1450boston1450 Posts: 6,673
    edited July 2014
    Very nice-i hate you :) those are beautiful. Love the stands too. Do tell us how you like the sounds of them. Enjoy
    ...
    ...
    Randy/Maine .. SDA-CRS+TL-RTA15TL-Cs1000p
    · Share on TwitterShare on Facebook
  • westmassguywestmassguy Posts: 6,721
    edited July 2014
    Congrats, very nice find. You should make your own cable with SpeakOn connectors, and get rid of the pin/blade jacks altogether.
    Agreed on the JBL Titanium Domes, like finger nails on a chalk board.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
    · Share on TwitterShare on Facebook
  • halo71halo71 Posts: 4,495
    edited July 2014
    You find so many deals there. Damn, I need to move to Colorado! Among other reasons....hehe
    --Gary--
    Onkyo Integra M504, Bottlehead Foreplay III, Denon SACD, Thiel CS2.3, NHT VT-2, Infinity RSIIIa, SDA1C and a few dozen other speakers around the house I change in and out.
    · Share on TwitterShare on Facebook
  • boston1450boston1450 Posts: 6,673
    edited July 2014
    Mystery i just sold some beautiful AR 318ps tower & 216ps bookshelfs & 225ps center. Nice HT speakers IMO for what they are. I was leery when i bought them for cheap $$$. I redid the cabinets & they came out pretty nice. I just deleted the pictures on my computer :(
    ...
    ...
    Randy/Maine .. SDA-CRS+TL-RTA15TL-Cs1000p
    · Share on TwitterShare on Facebook
  • Toolfan66Toolfan66 Posts: 14,532
    edited July 2014
    If you end up selling them I would like dibs..

    And I don't have a pin/blade cable, I sold you the only Blade/Blade I had, I will help you mod them for a DIY cable..
    · Share on TwitterShare on Facebook
  • BigerikBigerik Posts: 149
    edited July 2014
    Very nice! Gotta love it when they have stands and all!
    · Share on TwitterShare on Facebook
  • MysteryMystery Posts: 2,462
    edited July 2014
    cnh wrote: »
    Very nice!

    Regarding those JBL 2600s, I have a pair. Those titanium domes won't do you any favors and they have an UNBELIEVABLY HIGH FAILURE rate because there is a flaw in their construction!

    Replace them with a pair of these partsexpress Vifas and you'll be surprised at how much better they'll sound!

    http://www.parts-express.com/vifa-bc25sc06-04-1-textile-dome-tweeter--264-1028

    cnh

    I had 2500's before so I am familiar on their sound.
    I didn't get them to use but to flip.
    As long as they work I can triple what I paid for them.

    The AR's will make nice background bookshelves.
    F1nut wrote: »
    Nice haul.
    Larry doesn't make cables.
    I meant he's local Polk part store.
    But he's got skills to make anything :wink:.
    Nightfall wrote: »
    Those CRS look great! How much is real cheap?
    It's very embarrassing to even mention it for CRS+.

    When I got there, owner said many others called after me.
    I thanked him for holding it for me.
    He said, "You were the 1st to call and I'm not going to sell to another person. After all, honor is something we have to keep in craigslist".
    True that! icon14.png

    I was 1st caller even after 33 minutes of posting.
    boston1450 wrote: »
    Very nice-i hate you :) those are beautiful. Love the stands too. Do tell us how you like the sounds of them. Enjoy
    I had the exact pairs before so they are not new to me but the stands certainly are.
    halo71 wrote: »
    You find so many deals there. Damn, I need to move to Colorado! Among other reasons....hehe
    Ganja and music --> heaven although I only get the latter one to use due to work.

    Toolfan66 wrote: »
    If you end up selling them I would like dibs..

    And I don't have a pin/blade cable, I sold you the only Blade/Blade I had, I will help you mod them for a DIY cable..
    Thanks.
    If I go about replacing the pin/blade with speakon, need some guidance.
    For now, I will just cram something.

    Sonus Faber Concerto Grand Piano, Klipsch Heresy, Epicure 20+,T/E 280, Polk 4,4.5,5A.
    DB Plus 880, AR 48S, Smaller Advents. SUBs: Monitor Audio. Pre: HK AP2500, C1, Tandberg 3002A.
    Amps:     BB275, Crown XLS1500, QSC, Rotel, Luxman R-114, Nakamichi...
    · Share on TwitterShare on Facebook
  • boston1450boston1450 Posts: 6,673
    edited July 2014
    Colorado does seem to have a ton of Polk vintage speakers my SDA2b's came from there & i see tons of them often on Epay & Craigslist .
    ...
    ...
    Randy/Maine .. SDA-CRS+TL-RTA15TL-Cs1000p
    · Share on TwitterShare on Facebook
  • voltzvoltz Posts: 5,423
    edited July 2014
    A regular gold mine over there!

    Nice catch!
    2 ch- Polk CRS+ * Vincent SA-31MK Preamp * Vincent Sp-331 Amp * Marantz SA8005 SACD * Project Xperience Classic TT * Sumiko Blue Point #2 MC cartridge

    HT - Polk 703's * NAD T-758 * Adcom 5503 * Oppo 103 * Samsung 60" series 8 LCD
    · Share on TwitterShare on Facebook
  • oldrockeroldrocker Posts: 2,352
    edited July 2014
    Nice find, I on the other hand have been getting skunked lately :(
    · Share on TwitterShare on Facebook
  • gudnoyezgudnoyez Posts: 7,501
    edited July 2014
    Sweet and with stands enjoy them, I paid more for my stands then I did for 2 pairs of CRS+s so getting the stands with them makes that a awesome find.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
    · Share on TwitterShare on Facebook
  • MysteryMystery Posts: 2,462
    edited July 2014
    All speakers work.
    I haven't tested the SDA's with interconnect cable but all drivers (except dimensional) seem to work fine.
    I'm confident the dimensional drivers also work.
    Need to DIY something.

    Sonus Faber Concerto Grand Piano, Klipsch Heresy, Epicure 20+,T/E 280, Polk 4,4.5,5A.
    DB Plus 880, AR 48S, Smaller Advents. SUBs: Monitor Audio. Pre: HK AP2500, C1, Tandberg 3002A.
    Amps:     BB275, Crown XLS1500, QSC, Rotel, Luxman R-114, Nakamichi...
    · Share on TwitterShare on Facebook
  • PolkieManPolkieMan Posts: 2,446
    edited July 2014
    NICE

    When I bought my SDA 1C took with me for the demo an old radio shack speaker wire with RCA connectors on both ends, the outer ring (fingers) were bent outward and then broke off.
    That's when I found one of the (dimensional) drivers was bad he knocked off $50 for that.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
    · Share on TwitterShare on Facebook
  • MysteryMystery Posts: 2,462
    edited July 2014
    Dimensional drivers work fine.

    I made a DIY cable using thick speaker wire.
    Used RCA leads for the pin and cut flat pieces from the same RCA casing that I removed to access the lead.
    So one provides material for both the pin and blade. :wink:
    Works great.

    Sonus Faber Concerto Grand Piano, Klipsch Heresy, Epicure 20+,T/E 280, Polk 4,4.5,5A.
    DB Plus 880, AR 48S, Smaller Advents. SUBs: Monitor Audio. Pre: HK AP2500, C1, Tandberg 3002A.
    Amps:     BB275, Crown XLS1500, QSC, Rotel, Luxman R-114, Nakamichi...
    · Share on TwitterShare on Facebook
  • Toolfan66Toolfan66 Posts: 14,532
    edited July 2014
    You only need the pin, the blade side is really nothing without a dreadnought..
    · Share on TwitterShare on Facebook
  • MysteryMystery Posts: 2,462
    edited July 2014
    Toolfan66 wrote: »
    You only need the pin, the blade side is really nothing without a dreadnought..

    I thought so but some posts mention blade side is connected to ground so separated them out.
    Either way, it shouldn't hurt.

    Sonus Faber Concerto Grand Piano, Klipsch Heresy, Epicure 20+,T/E 280, Polk 4,4.5,5A.
    DB Plus 880, AR 48S, Smaller Advents. SUBs: Monitor Audio. Pre: HK AP2500, C1, Tandberg 3002A.
    Amps:     BB275, Crown XLS1500, QSC, Rotel, Luxman R-114, Nakamichi...
    · Share on TwitterShare on Facebook
  • nspindelnspindel Posts: 5,346
    edited July 2014
    Blade side is connected to ground in order for the Dreadnought to work.
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
    · Share on TwitterShare on Facebook
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register
© Polk Audio 2014