Polk Audio SDA SRS 1.2TL Crossover Modification Thread

12346»

Comments

  • VR3
    VR3 Posts: 24,491
    edited May 2013
    Thank you sir! :]

    This is by far the hardest to photograph mod I have performed. It is so large and multi dimensional...

    The owner is pumped! :]
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • Moose68Bash
    Moose68Bash Posts: 3,772
    edited May 2013
    Trey,

    Those look fantastic, and I bet they sound even better!

    Congratulations! Job well done, sir!

    Phil
    Family Room, Innuos Statement streamer with Morrow Audios USB cable to DirectStream DAC w/Bridge II; AQ Sky XLRs, McIntosh MC 220 Tube Pre; AQ Sky XLRs, CAT 600.2 Dualmono Amp, Morrow SP7 Speaker Cables, SDA SRS 1.2tls (RD0198s, Dreadnought, Black Hole 5, Acousta-Stuf, Dynamat Extreme, JBWeld. Vr3 Mods: "The Abbot" Monastery-Level Xovers, Custom Internal Wiring, Binding Post Plates, & SDA ICs).

    Exercise Room, Wadia 171 iPod Dock, PS Audio PerfectWave Transport, Innuos Streamer with Cat 6 cable connection to PS Audio PerfectWave MkII DAC w/Bridge II, AQ Sky XLRs, Perreaux PMF3150 Amp, Dreadnought, Supra Rondo 4x2.5 Speaker Cables, SDA 1Cs (Vr3 Mods Xovers).

    Synology 713+ NAS on Gigabit LAN serving PW MkII DAC & DirectStream DAC.
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited May 2013
    Thanks Phil! :)

    How are the Allison's coming? :)
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited June 2013
    I received a call from the owner last night and he was thrilled.. should have a review I can post here in the next few weeks!
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    I am getting to build another one of these monsters but this time even CRAZIER! :-D

    All MR! I am going to add a horizontal strip towards the back to mount the large inductor on! Will be fun!
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • Oldfatdogs
    Oldfatdogs Posts: 1,874
    edited August 2013
    You got it going on young man,very nice job.
    Dan
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    Thank you sir! :)
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • Drenis
    Drenis Posts: 2,871
    edited August 2013
    Bet that's expensive. 5 figures.
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    It actually was not too much more, I now have the channels to acquire 400v MR so it saves cost but not sacrifice performance... :)
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    I like the size of the 400v MR!
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • treitz3
    treitz3 Posts: 14,412
    edited August 2013
    Whoa! Them's some biggun's...
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    ~ The best way to enjoy digital music reproduction is to never listen to good analogue reproduction ~

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    ~ When the law ends, tyranny begins ~
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    They are actually SMALL, I like it. The 400v is maybe 40% of the size of the 620v! Definitely a space saver!!

    Example, the left caps are 6.8uf 620v, the middle caps are 12uf 400v
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • Toolfan66
    Toolfan66 Posts: 14,603
    edited August 2013
    I think I got some of the last 620v, I have to say I like the smaller size..
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    They still make the 620v but the 400v for the price will start to take over! I like the size and price for sure! Might actually be able to squeeze some MR caps on the inside of the LSiM705! :)
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • treitz3
    treitz3 Posts: 14,412
    edited August 2013
    Oh, my bad. I thought the old size was off to the right and the new size, well..... They looked to have been about the size of a half gallon of milk. Silly me.

    Tom
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    ~ The best way to enjoy digital music reproduction is to never listen to good analogue reproduction ~

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    ~ When the law ends, tyranny begins ~
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    haha! That would be AWESOME! I would need a bigger shelf for sure!
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • pitdogg2
    pitdogg2 Posts: 18,575
    edited August 2013
    Silly question coming......

    Why would anyone need 600+ volt for audio? Obviously there are other uses for them than speakers just can't come up with any....

    Are there speakers that would need a 400v cap even?
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited August 2013
    Here are some resources -

    http://www.learningaboutelectronics.com/Articles/What-does-the-voltage-rating-on-a-capacitor-mean
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited September 2013
    I dub ye... the "White Knight" of the Monastery series!

    All Clarity Cap MR, all the time
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    edited April 2014
    1.2TL GIMPOD, always fun :)
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • deafbykhorns
    deafbykhorns Posts: 150
    edited May 2014
    I'm guessing about a $1200 build?
    Main System- Scratch built 2A3 , Lightspeed preamp, Technics SP15/Graham/XV1s,Klipschorns w/ALK xovers/Trachorns, Speakercraft MT8(4), Sonos ZP90, Yamaha Aventage for surround
    Office System- Adcom GTP500, Bedini 45/45,Lexicon RT-20,Enlightened Audio DAC, Polk SDA2.3TL, Northcreek Borealis
    · Share on TwitterShare on Facebook
  • nspindel
    nspindel Posts: 5,343
    edited May 2014
    Here's a question - how much would you have to pay retail for a new pair of speakers that are built with this level of electronics inside?
    Good music, a good source, and good power can make SDA's sing. Tubes make them dance.
    · Share on TwitterShare on Facebook
  • deafbykhorns
    deafbykhorns Posts: 150
    edited May 2014
    Most the guys on here probably don't pay retail
    Typically multiply the parts price time 6 is a rule of thumb for retail?
    Main System- Scratch built 2A3 , Lightspeed preamp, Technics SP15/Graham/XV1s,Klipschorns w/ALK xovers/Trachorns, Speakercraft MT8(4), Sonos ZP90, Yamaha Aventage for surround
    Office System- Adcom GTP500, Bedini 45/45,Lexicon RT-20,Enlightened Audio DAC, Polk SDA2.3TL, Northcreek Borealis
    · Share on TwitterShare on Facebook
  • treitz3
    treitz3 Posts: 14,412
    edited May 2014
    nspindel wrote: »
    Here's a question - how much would you have to pay retail for a new pair of speakers that are built with this level of electronics inside?
    A lot.

    Tom
    In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence.

    ~ The best way to enjoy digital music reproduction is to never listen to good analogue reproduction ~

    ~ Not all things that can be measured can be heard and not all things heard can be measured ~

    ~ When the law ends, tyranny begins ~
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    Work in progressa7mdvexgz2q6.jpg
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • ptrooper
    ptrooper Posts: 464
    love all your work .
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    New laser cut plates uasynh1pgvqp.jpg
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    Clarity CSA / CMR

    03jh4v3gu2gy.jpg
    5coolub16qvd.jpg
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
  • VR3
    VR3 Posts: 24,491
    Digging the new CSA/CMR! :)

    zshype5pd6vy.jpg
    - Not Tom

    "No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
    · Share on TwitterShare on Facebook
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register