Selling off some items

NJPOLKER
NJPOLKER Posts: 3,474
edited December 2009 in For Sale (FS) Classifieds
I have decided to sell off a bunch of stuff I have accumulated since I joined here a few years ago.
These are not expensive items and it does make make much sense to spend a lot to ship/package them so local/close sale is a good idea.
I will not accept payment until you receive them, hopefully pick them up and get them home. The Denon Rec. and CDP both worked last time I used them but its been a couple years. So, I will feel comfortable accepting payment only after the buyer fires them up. I played with the remotes and they seem to work and have batteries in them :)
$150.00 for both plus shipping if we have to use that option.

The same payment arrangements apply to the Carver M-1.5t as the Denon combo. It is a perfect amp to go to one of the two Carver repair shops in the upper northwest. It runs OK but is old and caps should be replaced. If I remember correctly Bob Carver will update the M-1.5t for a flat fee of $175. which is hard to beat. The lights all work fine which is a good thing. I hope you can see the top of the unit well enough to see the marks all over the top. All it really needs is a good coat of spray paint. I was going to send it to Bob Carver myself but decided to sell it instead of bothering.
$175.00 plus shipping if we have to use that option.

I don't charge tax :p

I have more items coming up for sale like my Arcam CD72 CDP, Cambridge Audio A500 integrated amp, Ben's IC's 6' and 3', maybe a set of AQ cables too but gotta think that one over more.
Post edited by NJPOLKER on
· Share on FacebookShare on Twitter
«1

Comments

  • starkiller
    starkiller Posts: 2,723
    edited November 2009
    does the denon player have a remote and does it play cdr's? if so, would you be willing just to sell that and ship? or, any other changers going away?
    Computer room Hegeman 1 SpeakersM&K VX-80 subKenwood DP-7010Cambridge Audio CXC Transport Rega DACPrimaLuna Prologue Four AmpAric Audio Tube PreampGarage Jennings Research SquareCustom tube preampCrown XLS-1000Denon DCD-1500II Modded MSB Link DAC
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    Next up is my Cambridge Audio A500 Integrated amp
    This is a great little Integrated. It has a little wear which I tried to show in the pictures. Some of the lettering is worn but other than that its great. The original CA bag, remote and manual come with it of course. It has Black Diamond Racing Pyramid Cones under the unit which cost $60.00. Oh yeah the remote has some wear too but no big deal.
    $150.00 + shipping
    I have final say as to who I sell this unit to. Its a steal at this price IMHO and hate to part with it. But, I am moving on and you will see what all I am moving on to in December.


    Review http://www.audioreview.com/cat/amplification/integrated-amplifiers/cambridge-audio/a500/prd_115659_2717crx.aspx

    Info http://www.tnt-audio.com/ampli/cambridge-a500_e.html
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    starkiller wrote: »
    does the denon player have a remote and does it play cdr's? if so, would you be willing just to sell that and ship? or, any other changers going away?

    The remote for the CDP works and is like new since I never used it till now while checking it out.

    I am not in a hurry to any of these items and will wait for awhile for a sale if needed.

    I am going to sell my Arcam CD72 soon but not sure how soon yet.
    http://www.soundstage.com/revequip/arcam_cd72.htm
    · Share on FacebookShare on Twitter
  • starkiller
    starkiller Posts: 2,723
    edited November 2009
    Does it play cdr's?
    Computer room Hegeman 1 SpeakersM&K VX-80 subKenwood DP-7010Cambridge Audio CXC Transport Rega DACPrimaLuna Prologue Four AmpAric Audio Tube PreampGarage Jennings Research SquareCustom tube preampCrown XLS-1000Denon DCD-1500II Modded MSB Link DAC
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    I already sold a wonderful set of Morrow Audio SP3's speaker cables/wires without even listing them. It's great how Polkies take care of one another.
    · Share on FacebookShare on Twitter
  • concealer404
    concealer404 Posts: 7,440
    edited November 2009
    I may want that Carver... I know what my paycheck will be like tomorrow morning, so i'll let you know for sure then. :)
    I don't read the newsssspaperssss because dey aaaallllllllll...... have ugly print.

    Living Room: B&K Reference 5 S2 / Parasound HCA-1000A / Emotiva XDA-2 / Pioneer BDP-51FD / Paradigm 11se MKiii

    Desk: Schiit Magni 2 Uber / Schiit Modi 2 Uber / ISK HD9999

    Office: Schiit Magni 2 Uber / Schiit Modi 2 Uber / Dynaco SCA-80Q / Paradigm Legend V.3

    HT: Denon AVR-X3400H / Sony UBP-X700 / RT16 / CS350LS / RT7 / SVS PB1000
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    starkiller wrote: »
    Does it play cdr's?

    Sorry for being a dope but does that mean a blank cd/cdr recorded on from the internet/itunes? If so yes I have one playing right now.
    I just set the two Denons up to my SDA2a's with monster some wire and monster ICs I took out of the closet and they sound good.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    concealer404 wrote: »
    I may want that Carver... I know what my paycheck will be like tomorrow morning, so i'll let you know for sure then. :)

    You and I will work something out.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    Next up are Ben's IC's. They are in like new condition and I have been using them so they are burned-in.

    One pair 6' $60.00
    One pair 3' $30.00

    I'll pay for the shipping cost.

    Damn what a handsome couple :rolleyes: almost as handsome as the IC's
    · Share on FacebookShare on Twitter
  • concealer404
    concealer404 Posts: 7,440
    edited November 2009
    NJPOLKER wrote: »
    You and I will work something out.

    I'll probably want to pick your brain about it as well if i've got the money. I haven't heard any Carver gear, and i'm halfway afraid of not liking it... kindof scared to mess with my synergy. ;)
    I don't read the newsssspaperssss because dey aaaallllllllll...... have ugly print.

    Living Room: B&K Reference 5 S2 / Parasound HCA-1000A / Emotiva XDA-2 / Pioneer BDP-51FD / Paradigm 11se MKiii

    Desk: Schiit Magni 2 Uber / Schiit Modi 2 Uber / ISK HD9999

    Office: Schiit Magni 2 Uber / Schiit Modi 2 Uber / Dynaco SCA-80Q / Paradigm Legend V.3

    HT: Denon AVR-X3400H / Sony UBP-X700 / RT16 / CS350LS / RT7 / SVS PB1000
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    One thing I have failed to mention is method of payment. I mentioned prior that I am in no hurry to sell any of these items and need to be absolutely certain both parties are satisfied with the deal. We'll will work out payment arrangements thru PM's if thats OK.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    concealer404 wrote: »
    I'll probably want to pick your brain about it as well if i've got the money. I haven't heard any Carver gear, and i'm halfway afraid of not liking it... kindof scared to mess with my synergy. ;)

    It's kind of like messing with women, you gotta do it :eek:

    For who ever buys it I suggest sending it in for a rebuild by the X Carver employee's. It works OK now but really needs updated. That said, for the cost we are talking about it's hard to go wrong.
    · Share on FacebookShare on Twitter
  • starkiller
    starkiller Posts: 2,723
    edited November 2009
    yep, thats what a cdr is :) how much for the denon player shipped to 98327 if you choose to do it that way and not go local?
    Computer room Hegeman 1 SpeakersM&K VX-80 subKenwood DP-7010Cambridge Audio CXC Transport Rega DACPrimaLuna Prologue Four AmpAric Audio Tube PreampGarage Jennings Research SquareCustom tube preampCrown XLS-1000Denon DCD-1500II Modded MSB Link DAC
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    starkiller wrote: »
    yep, thats what a cdr is :) how much for the denon player shipped to 98327 if you choose to do it that way and not go local?

    Too soon to tell. I'd really rather not ship it across the country at this point.
    · Share on FacebookShare on Twitter
  • starkiller
    starkiller Posts: 2,723
    edited November 2009
    okey doke..no problem...
    Computer room Hegeman 1 SpeakersM&K VX-80 subKenwood DP-7010Cambridge Audio CXC Transport Rega DACPrimaLuna Prologue Four AmpAric Audio Tube PreampGarage Jennings Research SquareCustom tube preampCrown XLS-1000Denon DCD-1500II Modded MSB Link DAC
    · Share on FacebookShare on Twitter
  • tbui2007
    tbui2007 Posts: 128
    edited November 2009
    pm sent !i want ben's ic. thanks.
    LSI15 Front LSIC Center Lsi7 Rears Lsi7 Sides DSW600
    Sony S560 Blu-Ray DVD
    Sony 46W5100
    Monster HTS-3600
    Sunfire TGP-401 Pre
    Sunfire Grand 200x7
    · Share on FacebookShare on Twitter
  • ESavinon
    ESavinon Posts: 3,067
    edited November 2009
    Are you willing to sell the receiver by itself?
    Where in jersey are you located?
    SRT For Life; SDA Forever!

    The SRT SEISMIC System:
    Four main satellite speakers, six powered subs, two dedicated for LFE channel, two center speakers for over/under screen placement and three Control Centers. Amaze your friends, terrorize your neighbors, seize the audio bragging rights for your state. Go ahead, buy it; you only go around once.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    ESavinon wrote: »
    Are you willing to sell the receiver by itself?
    Where in jersey are you located?

    I am in Hunterdon county about 5 miles north of 78. If you looked at a map Clinton NJ is the biggest town by me.
    Since I have one guy who may want the CDP the answer is yes.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    tbui2007 wrote: »
    pm sent !i want ben's ic. thanks.

    Before you get carried away we need to discuss this transaction further thru PM's.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    NJPOLKER wrote: »
    I am in Hunterdon county about 5 miles north of 78. If you looked at a map Clinton NJ is the biggest town by me.
    Since I have one guy who may want the CDP the answer is yes.

    I have tried the remote for the Denon receiver this AM and the volume on the remote will not work. I even put new batteries in it. I'll keep fooling with it and may read the manual :)
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    NJPOLKER wrote: »
    Before you get carried away we need to discuss this transaction further thru PM's.

    I thought about asking for those IC's, if he doesn't take the 3ft pair let me know!
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    I should have stated in the first post that I don't do PayPal.
    · Share on FacebookShare on Twitter
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    NJPOLKER wrote: »
    I should have stated in the first post that I don't do PayPal.

    Got it!

    Goodluck with your sale, and BUMP for some great stuff at low prices :)
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    To no surprise the IC's are sold. For some reason I didn't think they'd last long :)
    I can't wait to buy my new IC's
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    Kex wrote: »
    For anyone with a Logitech Harmony remote, this won't even be an issue. I have a Denon with a very similar remote, and it's in the Harmony database, so I'd bet that one is too.

    Best of luck with the selling spree, don't spend it all on that dish water stuff you like to drink!

    Thanks for the Logitech advice.

    I got the Budweiser covered already.

    My thought is I'll buy a set of MIT speaker cables with the money from these sales and a couple more items I intend to sell. That matched with the MIT IC's I intend on buying soon will be a great match.
    · Share on FacebookShare on Twitter
  • ben62670
    ben62670 Posts: 15,969
    edited November 2009
    NJPOLKER wrote: »
    To no surprise the IC's are sold. For some reason I didn't think they'd last long :)
    I can't wait to buy my new IC's

    Half price is cheaper than I can make them!
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    I am trying to sell these items at fair prices.

    The Cambridge Audio Integrated Amp should have been sold by now. What a great IA it is.
    · Share on FacebookShare on Twitter
  • NJPOLKER
    NJPOLKER Posts: 3,474
    edited November 2009
    Anyone have any thoughts on the Carver M-1.5t?

    I think $175. for the unit and $175. for the Carver re-build is a good deal. $350. total for a re-built M-1.5t that will be like new! How can you beat that?
    · Share on FacebookShare on Twitter
  • seeclear
    seeclear Posts: 1,244
    edited November 2009
    I think it is $195 now from Rita's shop. Still a pretty good deal.
    "Don't forget to change your politician. They are like diapers they need to be changed regularly, and for the same reason."
    · Share on FacebookShare on Twitter
  • snow
    snow Posts: 4,358
    edited November 2009
    NJPOLKER wrote: »
    Anyone have any thoughts on the Carver M-1.5t?

    I think $175. for the unit and $175. for the Carver re-build is a good deal. $350. total for a re-built M-1.5t that will be like new! How can you beat that?
    I have all kinds of thoughts but am keeping them to myself until you say you will ship :p If you do please give me dibs or place me in line.



    REGARDS SNOW
    Well, I just pulled off the impossible by doing a double-blind comparison all by myself, purely by virtue of the fact that I completely and stupidly forgot what I did last. I guess that getting old does have its advantages after all :D
    · Share on FacebookShare on Twitter