Show me your ****(embly), and let me get in your guts baby!

1232426282942

Comments

  • dvran
    dvran Posts: 280
    edited November 2009
    Philco's rock. I had an old Philco TV that lasted about 20 years.
    ~Dan

    Projector: Epson 705HD on 106" DaLite
    TV: Samsung 50" Plasma PN50B550
    Receiver: Onkyo 607
    Fronts: Polk 1000i
    Center: Polk Csi40
    Rears: Polk Fxi30
    Sub: Velodyne Minivee 10
    PS3 and Xbox
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    I said it was coming, so here you have it. One FULLY-MODDED Moscode by the Man himself.....Stephen Sank :D

    This is what I'm currently running, definitely a big step from the upgraded+2 mod Moscode 300 I posted up here a few pages back.
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    Pics!
    SNV12359.jpg

    SNV12369.jpg

    SNV12363.jpg

    SNV12365.jpg

    SNV12366.jpg
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • Systems
    Systems Posts: 14,873
    edited November 2009
    Looks good,I bet a small fortune was spent on those MIT and other film caps.Are the Holco resistors stock or part of the upgrade?
    Testing
    Testing
    Testing
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    Upgrade, I'll repost a few pics of the other Moscode with stock caps+resistors. The weight itself is very noticeable too!
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    Here's the older one

    SNV11784.jpg
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    Sound quality and dynamics are unreal, sounds like I got a whole new amp!
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • concealer404
    concealer404 Posts: 7,440
    edited November 2009
    kawizx9r wrote: »
    Sound quality and dynamics are unreal, sounds like I got a whole new amp!

    It's like you have an invisible amp, Freddy. ;)


    Oh HELL. NOW the picture shows, and i look like an idiot. Thanks. :p
    I don't read the newsssspaperssss because dey aaaallllllllll...... have ugly print.

    Living Room: B&K Reference 5 S2 / Parasound HCA-1000A / Emotiva XDA-2 / Pioneer BDP-51FD / Paradigm 11se MKiii

    Desk: Schiit Magni 2 Uber / Schiit Modi 2 Uber / ISK HD9999

    Office: Schiit Magni 2 Uber / Schiit Modi 2 Uber / Dynaco SCA-80Q / Paradigm Legend V.3

    HT: Denon AVR-X3400H / Sony UBP-X700 / RT16 / CS350LS / RT7 / SVS PB1000
  • kawizx9r
    kawizx9r Posts: 5,150
    edited November 2009
    It's like you have an invisible amp, Freddy. ;)

    It's NUTS bro!

    It's much heavier than the other one as well.........wonder if this thing could power a blender as well with all it's damn current lol. :p

    Edit: Get off that 56k!

    Seriously, scroll up and check them out....then look at the last pic of the older one.
    Truck setup
    Alpine 9856
    Phoenix Gold RSD65CS

    For Sale
    Polk SR6500
    Polk SR5250
    Polk SR104


    heiney9 wrote: »
    Any clue how to use the internet? Found it in about 10 sec.
  • ivansfo
    ivansfo Posts: 145
    edited November 2009
    Inside of a Bryston SSP.
    I had to pull apart this Bryston SP1.7 to upgrade the firmware.

    sp17.jpg
  • Systems
    Systems Posts: 14,873
    edited November 2009
    Cool,did they send you a new IC?
    Testing
    Testing
    Testing
  • ivansfo
    ivansfo Posts: 145
    edited November 2009
    GV#27 wrote: »
    Cool,did they send you a new IC?

    Yep, Bryston sent two chips, a chip puller, and new screws. Both chips sit on that daughter board behind the face panel. One is the square chip in the brown socket and the other bigger IC with the white label on it. Most difficult part was pulling off the large one.
  • mjcmt
    mjcmt Posts: 44
    edited February 2010
    mhardy6647 wrote: »
    Scott 312-D soiled state 'broadcast monitor' (tuner); followed me home from the dump today.
    Pretty cool piece of hardware.

    I bought this tuner new in 1970 to use with my Dynaco SCA80 amp, Thorens TD124/SME 3009 II/Stanton 681EE, and "Double Advent" loundspeakers.

    It is an excellent FM tuner...even today. Keep it!

    I wish I had my system today.:mad:
  • concealer404
    concealer404 Posts: 7,440
    edited February 2010
    mjcmt wrote: »
    I bought this tuner new in 1970 to use with my Dynaco SCA80 amp, Thorens TD124/SME 3009 II/Stanton 681EE, and "Double Advent" loundspeakers.

    It is an excellent FM tuner...even today. Keep it!

    I wish I had my system today.:mad:

    That's a nice little amp, too. :D I still have one kicking around somewhere.
    I don't read the newsssspaperssss because dey aaaallllllllll...... have ugly print.

    Living Room: B&K Reference 5 S2 / Parasound HCA-1000A / Emotiva XDA-2 / Pioneer BDP-51FD / Paradigm 11se MKiii

    Desk: Schiit Magni 2 Uber / Schiit Modi 2 Uber / ISK HD9999

    Office: Schiit Magni 2 Uber / Schiit Modi 2 Uber / Dynaco SCA-80Q / Paradigm Legend V.3

    HT: Denon AVR-X3400H / Sony UBP-X700 / RT16 / CS350LS / RT7 / SVS PB1000
  • Face
    Face Posts: 14,340
    edited June 2010
    w4sst500.jpg

    Who knew Class D could sound so good? :D
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
  • FTGV
    FTGV Posts: 3,649
    edited June 2010
    Are those your ICE modules?
  • disneyjoe7
    disneyjoe7 Posts: 11,435
    edited June 2010
    It doesn't look like ICE modules too me, since I see transistor also. Face what make and model is that?

    Speakers
    Carver Amazing Fronts
    CS400i Center
    RT800i's Rears
    Sub Paradigm Servo 15

    Electronics
    Conrad Johnson PV-5 pre-amp
    Parasound Halo A23
    Pioneer 84TXSi AVR
    Pioneer 79Avi DVD
    Sony CX400 CD changer
    Panasonic 42-PX60U Plasma
    WMC Win7 32bit HD DVR


  • FTGV
    FTGV Posts: 3,649
    edited June 2010
    disneyjoe7 wrote: »
    It doesn't look like ICE modules too me
    Other than what looks like a custom input buffer on a separate PC board they look nearly identical to my 250ASP ICE module.
    Since I see transistor also.
    ICE modules use MOSFET's as output devices.
  • disneyjoe7
    disneyjoe7 Posts: 11,435
    edited June 2010
    Since I only see that black metal on one side only, doesn't look as it connected to the other board, it also has screws holes, it also has a red wire going under it. I say not an ICE modules.

    Speakers
    Carver Amazing Fronts
    CS400i Center
    RT800i's Rears
    Sub Paradigm Servo 15

    Electronics
    Conrad Johnson PV-5 pre-amp
    Parasound Halo A23
    Pioneer 84TXSi AVR
    Pioneer 79Avi DVD
    Sony CX400 CD changer
    Panasonic 42-PX60U Plasma
    WMC Win7 32bit HD DVR


  • Face
    Face Posts: 14,340
    edited June 2010
    It's a Wyred 4 Sound ST-500. Fred, you're correct about the input buffer boards. There also appears to be a couple of parts added to the ice modules too.
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
  • FTGV
    FTGV Posts: 3,649
    edited June 2010
    Face wrote: »
    the input buffer boards.
    Yeah on mine I attach the input directly to the module where the white wire harness connects to it.
    Looks like it was a kit?
  • Zitro
    Zitro Posts: 864
    edited June 2010
    I just recently had both my NAD and Sansui open recently; wish I would have seen this thread earlier and taken pics. The Sansui is just a monster inside (I've never seen such large caps before) and the NAD has a massive toroidal for being rated at 50wpc.

    Cool thread, keep the pics coming!
    - Jeremy

    Amps: Jolida FX-10, NAD 3045, NAD C320BEE, Sansui G-9700
    Speakers: Polk Monitor 7A's, KEF Reference 104aB
    Sources: ProJect Debut Carbon, Sonos streaming FLAC
  • TECHNOKID
    TECHNOKID Posts: 4,298
    edited June 2010
    This is one of the coolest thread on CP :cool: I'll try to post some pics, many were acquired while I operated my repair shop. I hope this will not break your fun as many of the gear will be lower end (what can you expect when the owner doesn't want to put the money down and gives it away :o ). Its too bad, I trashed approximately 125 VCRs a couple years ago, that would have given the opportunity to compare older technology and various brands. Unbelievable how cheap were the newer models compared to the vintage tankers!
    DARE TO SOAR:
    “Your attitude, almost always determine your altitude in life” ;)
  • Zitro
    Zitro Posts: 864
    edited June 2010
    TECHNOKID wrote: »
    Unbelievable how cheap were the newer models compared to the vintage tankers!

    I feel ya; that's why I wanted to post pics of the Sansui (1979). The internals wreak of quality, there's a TON of circuitry in it and it's laid out very well. Even the soldering is high quality, and there's not a single piece of plastic on the thing. You just don't see that level of craftsmanship and quality anymore. Case and point, given the unit is 31 years old and works great, and it's never been restored!
    - Jeremy

    Amps: Jolida FX-10, NAD 3045, NAD C320BEE, Sansui G-9700
    Speakers: Polk Monitor 7A's, KEF Reference 104aB
    Sources: ProJect Debut Carbon, Sonos streaming FLAC
  • hearingimpared
    hearingimpared Posts: 21,137
    edited June 2010
    Face wrote: »
    w4sst500.jpg

    Who knew Class D could sound so good? :D

    Really!?!
  • hearingimpared
    hearingimpared Posts: 21,137
    edited June 2010
    Zitro wrote: »
    I feel ya; that's why I wanted to post pics of the Sansui (1979). The internals wreak of quality, there's a TON of circuitry in it and it's laid out very well. Even the soldering is high quality, and there's not a single piece of plastic on the thing. You just don't see that level of craftsmanship and quality anymore. Case and point, given the unit is 31 years old and works great, and it's never been restored!

    You haven't seen theh Musical Fidelity Tri-Vista 300 or the kw 500 hybrid integrated amps. Talk about wreaking of quality and built like a tank!
  • renowilliams
    renowilliams Posts: 920
    edited June 2010
    Found this shot of a VSX49TXi Elite online. Pretty decent innards really...

    Nice.....So thats what my avr looks like inside. It is a beast.
    "They're always talking about my drinking, but never mention my thirst" Oscar Wilde


    Pre-Amp: Anthem AVM 20
    Amp: Carver TFM-35
    Amp: Rotel RB-870BX
    Fronts : SDA 1B w/ RDO-194s
    T.V.:Plasma TC-P54G25
    Bluray: Oppo BDP-93
    Speaker Cables: MIT Terminater
    Interconnect Cables:DH Labs Silver Sonic BL-1isonic
  • Zitro
    Zitro Posts: 864
    edited June 2010
    You haven't seen theh Musical Fidelity Tri-Vista 300 or the kw 500 hybrid integrated amps. Talk about wreaking of quality and built like a tank!

    The Tri-Vista is a unit I've been wanting to hear. I love the look, and am a fan of Musical Fidelity's amps, based off of the ones I've heard.
    - Jeremy

    Amps: Jolida FX-10, NAD 3045, NAD C320BEE, Sansui G-9700
    Speakers: Polk Monitor 7A's, KEF Reference 104aB
    Sources: ProJect Debut Carbon, Sonos streaming FLAC
  • Face
    Face Posts: 14,340
    edited July 2010
    Line%202A%20SE.jpg

    Line%202A%20SE%20guts.jpg

    10lbs of sh%t in a 5lbs bag. :D
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
  • george daniel
    george daniel Posts: 12,096
    edited July 2010
    How many platinums do you have in there?
    Nice work BTW.
    JC approves....he told me so. (F-1 nut)