Bi-wiring with unterminated speaker wire?

bemckinley1974
bemckinley1974 Posts: 7
in Basic Hookup/Wiring Questions
Hi, I have an old power amp I’d like to try out on my lsim 707’s. It only has bare wire connections for the speaker wire. Can I make my own bi-wire using two lengths of unterminated wire, twisting the two red together and two black together on the amplifier end, and connecting the 4 ended side to the dual binding posts of the speaker?
· Share on FacebookShare on Twitter

Answers

  • Hermitism
    Hermitism Posts: 4,271
    Yes. You can also terminate the end with pins in case the doubled up wire is too thick to fit in the holes. Terminating the end of the wire and using shrink tubing helps prevent the bare wires from being exposed and tarnishing or turn green over time.

    https://douglasconnection.com/products/diy-and-save-do-it-yourself/diy-cable-kits-2/speaker-cable-connectors/pin-speaker-cable-connectors/
    · Share on FacebookShare on Twitter
  • bemckinley1974
    bemckinley1974 Posts: 7
    Thank you, I think if I stick with 14 gauge wire, the twisted ends will fit in the holes
    · Share on FacebookShare on Twitter
  • Hermitism
    Hermitism Posts: 4,271
    There is no need to biwire if you are using jumpers on the speakers, unless you are just trying to increase the wire gauge, or if you just wanted to experiment.

    I'm using biwire cables on a system which allowed me to eliminate the stock jumpers. The speakers on that system used a gold plated brass jumper which everyone recommended replacing to help sound quality.

    The guys here will recommend using a good quality wire. Many to choose from in all price ranges.
    · Share on FacebookShare on Twitter
  • gp4jesus
    gp4jesus Posts: 1,988
    Be CAREFUL with bare ended wire. Examine your connections w/a magnifying glass. Too easy for the tiniest single strand of wire to waste an amp.
    Samsung 60" UN60ES6100 LED, Outlaw Audio 976 Pre/Pro Samsung BDP, Amazon Firestick, Phillips CD Changer Canare 14 ga - LCR tweeters inside*; Ctr Ch outside BJC 10 ga: LCR mids “Foamed & Plugged**”, inside* & out
    8 ga Powerline: LR woofers, inside* & out
    *soldered **Rob the Man (Xschop) LR: Tri-amped RTi A7 w/Rotels. Woofers - 980BX; Tweets & Mids - 981, connected w/Monoprice Premiere ICs
    Ctr Ch: Rotel RB981 -> Bi-amped CSi A6 Surrounds: Premiere ICs ->Rotel 981 -> AR 12 ga -> RTi A3. 5 Subs: Sunfire True SW Signature -> LFE & Ctr Ch; 4 Audio Pro Evidence @ the “Corners”. Power Conditioning & Distribution: 4 dedicated 20A feeds; APC H15; 5 Furman Miniport 20s
    · Share on FacebookShare on Twitter
  • Gardenstater
    Gardenstater Posts: 4,500
    edited February 2020
    bemckinley1974 wrote: »
    Hi, I have an old power amp I’d like to try out on my lsim 707’s. It only has bare wire connections for the speaker wire. Can I make my own bi-wire using two lengths of unterminated wire, twisting the two red together and two black together on the amplifier end, and connecting the 4 ended side to the dual binding posts of the speaker?

    Here's a guide for using WBT Crimping Sleeves with multiple wires:

    http://www.wbtusa.com/pages/CrimpSleeveSelector.html

    http://www.wbtusa.com/pdf/wbt_crimping.pdf
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on FacebookShare on Twitter