FS/FT: MIT Terminator 2 Bi-Wire Speaker Cables

Originally purchased these from Jesse here: https://forum.polkaudio.com/discussion/182091/mit-terminator-2-bi-wire-speaker-cables

These are great sounding cables, but I've had my fun with them. Time for me to move in a different direction and pass these along to another Polkie.

They came with spades for the amp end, and I purchased a set of 4 MIT bananas for $35 off eBay so they'll come with both.

Full disclosure: One of the network boxes is starting to open up, due to I'm guessing the factory sealant/glue giving up. It's pretty much a non-issue and stays closed on it's own, but just wanted to mention it.

Asking $275 shipped via PP FF, I'm also open to trades for equivalently priced 8' bi-wire speaker cables. Thank you for your interest.

0cgfpol0nh88.jpg
«1

Comments

  • halo
    halo Posts: 5,616
    These will go well with the Usher speakers I'm selling....just saying :) Very nice cables at a very nice price! GLWTS!
    Audio: Polk S15 * Polk S35 * Polk S10 * SVS SB-1000 Pro
    HT: Samsung QN90B * Marantz NR1510 * Panasonic DMP-BDT220 * Roku Ultra LT * APC H10
  • Willow
    Willow Posts: 11,017
    No way, not from Jesse!!! I don't believe you. ;)
  • Hermitism
    Hermitism Posts: 4,261
    Drew is a prime example of a perfect seller. Boxing, communication, fast shipper... he's the trifecta of sellers. Even the packing tape will run perfectly parallel to the box's edges and be cut at a perfect ninety degree angle. A+
  • joecoulson
    joecoulson Posts: 4,943
    Agree completely ^
  • tonyb
    tonyb Posts: 32,963
    Hermitism wrote: »
    Drew is a prime example of a perfect seller. Boxing, communication, fast shipper... he's the trifecta of sellers. Even the packing tape will run perfectly parallel to the box's edges and be cut at a perfect ninety degree angle. A+

    Good to know, far cry from my packing abilities of chewing gum and tobacco spit.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • Clipdat
    Clipdat Posts: 12,935
    Let's get these bad boys to their new owner. I'm going to the FedEx store tomorrow to ship out other stuff, so I'd like to ship these out then as well!
  • WLDock
    WLDock Posts: 3,073
    halo wrote: »
    These will go well with the Usher speakers I'm selling....just saying :) Very nice cables at a very nice price! GLWTS!
    I bet they would, Damn! My mouth is watering now....

    2.2 Office Setup | LG 29UB55 21:9 UltraWide | HP Probook 630 G8 | Dell Latitude | Cabasse Stream Amp 100 | Boston Acoustics VS 240 | AUDIORAX Desk Stands | Mirage Omni S8 sub1 | Mirage Omni S8 Sub2
  • Clipdat
    Clipdat Posts: 12,935
    WLDock wrote: »
    I bet they would, Damn! My mouth is watering now....

    If you are buying Victor's Ushers, I will sell them to you for $250 shipped.
  • WLDock
    WLDock Posts: 3,073
    edited January 2019
    Thanks man, this would have been a very nice addition but I'm going to hold off on the Ushers and MIT for now. I have too much on the plate next month.

    Someday, I do want to try out MITs.

    GLWTS!

    Walt
    2.2 Office Setup | LG 29UB55 21:9 UltraWide | HP Probook 630 G8 | Dell Latitude | Cabasse Stream Amp 100 | Boston Acoustics VS 240 | AUDIORAX Desk Stands | Mirage Omni S8 sub1 | Mirage Omni S8 Sub2
  • verb
    verb Posts: 10,176
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,935
    verb wrote: »
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:

    I'll be using a brand new company's introductory speaker cables. Constructed of only the most exotic rare earth materials and assembled by hand in limited quantities.

    They're called NUNYA cables.
  • Hermitism
    Hermitism Posts: 4,261
    verb wrote: »
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:
    It's nunya business!

  • Hermitism
    Hermitism Posts: 4,261
    See what I did there?
  • verb
    verb Posts: 10,176
    Hermitism wrote: »
    verb wrote: »
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:
    It's nunya business!

    Haha! That's what I thought, but ya never know with our dear friend Drew! Especially in his time of sorrow after he yanked the tube sockets out of his pre! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,935
    Tube "socket", singular. I didn't botch them both.
  • verb
    verb Posts: 10,176
    Clipdat wrote: »
    Tube "socket", singular. I didn't botch them both.

    Sorry man. I really feel for ya. When I pulled a tube from the EAR last weekend, saw all that deflection of the PCB, got scared. Put my other hand on the PCB to stabilize it, and ever so gently wiggled that sucker out. Same process to wiggle it back in.
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • halo
    halo Posts: 5,616
    verb wrote: »
    Clipdat wrote: »
    Tube "socket", singular. I didn't botch them both.

    Sorry man. I really feel for ya. When I pulled a tube from the EAR last weekend, saw all that deflection of the PCB, got scared. Put my other hand on the PCB to stabilize it, and ever so gently wiggled that sucker out. Same process to wiggle it back in.

    Not supposed to wiggle them. Straight up to get them out and straight down to get them back in.
    Audio: Polk S15 * Polk S35 * Polk S10 * SVS SB-1000 Pro
    HT: Samsung QN90B * Marantz NR1510 * Panasonic DMP-BDT220 * Roku Ultra LT * APC H10
  • erniejade
    erniejade Posts: 6,321
    WLDock wrote: »
    Thanks man, this would have been a very nice addition but I'm going to hold off on the Ushers and MIT for now. I have too much on the plate next month.

    Someday, I do want to try out MITs.

    GLWTS!

    Walt

    You can buy them and i can store them for you. My mom lives in crown point so I'm out that way quite a bit
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
  • msg
    msg Posts: 10,021
    edited January 2019
    n/a
    I disabled signatures.
  • marvda1
    marvda1 Posts: 4,901
    edited January 2019
    Clipdat wrote: »
    verb wrote: »
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:

    I'll be using a brand new company's introductory speaker cables. Constructed of only the most exotic rare earth materials and assembled by hand in limited quantities.

    They're called NUNYA cables.

    do you have a link, can't find any info on them. B)
    Amplifiers: Norma IPA 140, MasterSound Compact 845, Ayre v6xe, Consonance Cyber 800
    Preamp: deHavilland Ultraverve 3
    Dac: Sonnet Morpheus 2, Musical Paradise mp-d2 mkIII
    Transport: Jay's Audio CDT2 mk2, Lumin U1 mini
    Speakers: Rosso Fiorentino Volterra II
    Speaker Cables: Crystal Clear Magnum Opus 2, Organic Audio Organic Reference 2
    Interconnects: Crystal Clear Magnum Opus 2, Argento Organic Reference 2, Argento Organic 2
    Power Cables: Argento Organic Reference, Synergistic Research Foundation 10 and 12 ga.
    Digital cables: Crystal Clear Magnum Opus 2 bnc, Tellurium Q aes, Silnote Audio Poseidon Signature 2 bnc
    Puritan PSM156
  • txcoastal1
    txcoastal1 Posts: 13,287
    marvda1 wrote: »
    Clipdat wrote: »
    verb wrote: »
    Drew why are you selling? What direction are you going? Upgrade? Do tell! :smile:

    I'll be using a brand new company's introductory speaker cables. Constructed of only the most exotic rare earth materials and assembled by hand in limited quantities.

    They're called NUNYA cables.

    do you have a link, can't find any info on them.

    Go check in the Nothing thread

    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
  • verb
    verb Posts: 10,176
    halo wrote: »
    verb wrote: »
    Clipdat wrote: »
    Tube "socket", singular. I didn't botch them both.

    Sorry man. I really feel for ya. When I pulled a tube from the EAR last weekend, saw all that deflection of the PCB, got scared. Put my other hand on the PCB to stabilize it, and ever so gently wiggled that sucker out. Same process to wiggle it back in.

    Not supposed to wiggle them. Straight up to get them out and straight down to get them back in.

    Thanks for the tip Vic!
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,935
    edited January 2019
    verb wrote: »
    Sorry man. I really feel for ya. When I pulled a tube from the EAR last weekend, saw all that deflection of the PCB, got scared. Put my other hand on the PCB to stabilize it, and ever so gently wiggled that sucker out. Same process to wiggle it back in.

    A gentle rocking/rolling motion as you pull up or push down can help ease the tube into or out of the socket. However I've read that side to side twisting motions should be avoided.
  • verb
    verb Posts: 10,176
    Clipdat wrote: »
    verb wrote: »
    Sorry man. I really feel for ya. When I pulled a tube from the EAR last weekend, saw all that deflection of the PCB, got scared. Put my other hand on the PCB to stabilize it, and ever so gently wiggled that sucker out. Same process to wiggle it back in.

    A gentle rocking/rolling motion as you pull up or push down can help ease the tube into or out of the socket. However I've read that side to side twisting motions should be avoided.

    Yep. That’s kinda what I do. Did. :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,935
    Price reduced to $250 shipped. Also still open to trades for 8'+ Bi-Wire SCs.
  • verb
    verb Posts: 10,176
    Great deal here! And such provenance! First @F1nut , now @Clipdat need I say more?! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • Clipdat
    Clipdat Posts: 12,935
    @K_M These would be a great way to get your feet wet in regards to what an aftermarket speaker cable can bring to your listening experience. The difference between these MITs and typical 12-14ga stranded copper speaker wire is NOT subtle at all.
  • Clipdat
    Clipdat Posts: 12,935
    Bump for 8' biwire trades. The worst I can say is no.
  • F1nut
    F1nut Posts: 50,557
    Damn good deal on some, better than regular cable, speaker cables here folks.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • Clipdat
    Clipdat Posts: 12,935
    Now $225 shipped, lets get these sold this week.