Center channel for 2.3 TL

2

Comments

  • westmassguywestmassguy Posts: 6,430
    Didn't somebody use a pair of SDA CRS's as their center with SDA's?

    A customer of mine used a single CRS+ for his center. I rebuilt a Monitor 10 rev2 crossover for it.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • Doug didya decide on anything?
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
  • gmcmangmcman Posts: 1,488
    Doug didya decide on anything?

    Not yet...looking at either the 706C or possibly a Def Tech CLR3000. Going to think on it for a couple days.
  • gmcmangmcman Posts: 1,488
    I went with the 706C in Midnight Mahogany. Thanks @dpowell for the heads up on the sale. Will post my thoughts after I get it up and running.
  • Didn't somebody use a pair of SDA CRS's as their center with SDA's?

    A customer of mine used a single CRS+ for his center. I rebuilt a Monitor 10 rev2 crossover for it.

    It would be worthwhile if you could show the custom center channel you built again. It sure was minty and will cause some envy in anyone looking for the ideal CC speaker for SDA's because you have the only one. :)
    Polk SDA SRS
    Yamaha M-65 (2x, bi-amped)
    Pioneer Elite SC-99
    Oppo UDP-203
    Polk CS350 center
    Polk MC-60 4x Atmos
    Polk AB700 4X surround
  • westmassguywestmassguy Posts: 6,430
    Didn't somebody use a pair of SDA CRS's as their center with SDA's?

    A customer of mine used a single CRS+ for his center. I rebuilt a Monitor 10 rev2 crossover for it.

    It would be worthwhile if you could show the custom center channel you built again. It sure was minty and will cause some envy in anyone looking for the ideal CC speaker for SDA's because you have the only one. :)

    Thanks, it's in my signature.

    https://forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • I would love to build a center like yours Dave, awesome work and a great read.
    Yamaha RXA1030, Yamaha CD, Bluesound node 2i, Tidal
    Polk SDA2btl highly modded
    Polk SDA 1C
    Polk CS350 LS x2
    Polk m5jr
    Kimber 8TC
    Sony 55" Bravia
    Wish list SVS sub

  • ddogddog Posts: 211
    gmcman wrote: »
    I went with the 706C in Midnight Mahogany. Thanks @dpowell for the heads up on the sale. Will post my thoughts after I get it up and running.

    Let us know how it works out for you...
  • ddogddog Posts: 211
    I would love to build a center like yours Dave, awesome work and a great read.

    Yes that came out really nice.. looks like it sounds nice also.

    Heres a current pic of my home brewed cc using two Rti11tl's, rebuilt crossovers and tweeter upgrade. Not as nice looking but they are behind a 120" accustic transparent screen so nobody see them. They sound fantastic in all 6 seats, both rows. Something I could never get right with a traditional cc below the screen.
    wb5iog3cfjmu.jpg
  • ddogddog Posts: 211
    @westmassguy...
    I just finished reading your link (I skimmed through it earlier) to the cc you built.
    Very nice job you did with it.
    Nice right up too.
  • westmassguywestmassguy Posts: 6,430
    I would love to build a center like yours Dave, awesome work and a great read.

    Thanks Brother
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • westmassguywestmassguy Posts: 6,430
    ddog wrote: »
    @westmassguy...
    I just finished reading your link (I skimmed through it earlier) to the cc you built.
    Very nice job you did with it.
    Nice right up too.

    Thank You.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • Doug sold me his MIT S1 speaker cables, so now I have them on the top and bottom of my 3.1’s. I moved my S3’s to the CS1000p to replace my old MH-750 cables. I heard a difference immediately as the vocals became more intelligible and the blend across the three front channels improved. It wasn’t a night and day difference though. It is kind of subtle and cumulative and sneaks up on you when you’re not paying attention. Vocal sibilance is also more apparent making it easier to make out what people are saying without having to either turn up the volume overall or increase the center level. In fact I turned the center level down and it’s still easier to understand what people are saying.
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
  • gmcmangmcman Posts: 1,488
    @westmassguy nice work on the center channel.

    I was thinking on trying something similiar to maintain a timbre match. Perhaps trying an upward firing passive with a lower profile cabinet since the CRS is too tall for my setup. However a new build would be too involved at the moment but would like to try.

    Still waiting on the 706C, the first one had to go back due to damage as well as other minor issues.
  • westmassguywestmassguy Posts: 6,430
    gmcman wrote: »
    @westmassguy nice work on the center channel.

    I was thinking on trying something similar to maintain a timbre match. Perhaps trying an upward firing passive with a lower profile cabinet since the CRS is too tall for my setup. However a new build would be too involved at the moment but would like to try.

    Still waiting on the 706C, the first one had to go back due to damage as well as other minor issues.

    Both my custom and the CRS+ were rather involved. Not exactly a weekend project. I've heard others have used an RTA-8T on it's side. It should perform similar to mine, except it's ported. You could invert polarity on the tweeter to try and mitigate any lobing effect.

    jaofic67z6d2.jpg


    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • FestYboyFestYboy Posts: 3,698
    ^ I seem to recall that being suggested by someone early on in this thread. ;) I'm glad to see someone else agrees.
  • westmassguywestmassguy Posts: 6,430
    FestYboy wrote: »
    ^ I seem to recall that being suggested by someone early on in this thread. ;) I'm glad to see someone else agrees.

    And so you did :) Helps when I take my own advice to others, and read the whole thread.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • dpowelldpowell Posts: 2,818
    gmcman wrote: »

    Still waiting on the 706C, the first one had to go back due to damage as well as other minor issues.

    Sorry to hear that! With the holidays impacting shipments, makes it an even longer wait. :neutral: looking forward to hearing your impressions.

    ____________________________________________________________
    polkaudio Fully Modded SDA SRS 2.3TL's + Dreadnaught, LSiM706c, 4 X TC265i Rears, SVS PB13 Ultra x 2
    Pass Labs X1, Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83SE, Sony SCD-C333ES
  • honestaquarianhonestaquarian Posts: 2,496
    https://oppodigital.com/hra/dsd-by-davidelias.aspx
    If anyone is wondering about the benefits of having a large center channel. Download the mulitchannel DSD version of David Elias Crossing Morning Light Western Town and play it back on your Oppo. The bass line coming mostly from the center channel is INCREDIBLE :o and pressurizes my living room. The bass speakers on my CS-1000p along with the power ports are amazing. :D
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
  • gmcmangmcman Posts: 1,488
    So I've had the 706C in place for about a week....being fed from center out of the Marantz SR5012, the L&R main which are currently the 2.3TL is fed also from the SR5012 but through the McCormack RLD-1 in theater bypass to the DNA-1.


    The 706C sounds clean, but despite what sounds to be a close match, it seems there is a void somewhere between the upper midrange and the bass...almost slightly grainy for lack of better terms.

    I'm looking at this large speaker, but hearing a smaller, boxy sounding speaker that doesnt aound as rich as I would expect.

    This was using the Audssey and I made sure sub was set to off, speakers are large...I have slightly better results using manual and setting the EQ myself.

    I saw there was a center width setting but haven't seen it on the setup screen.

    The 706C sounds real good, don't get me wrong, but at the same time sounds somewhat tight, constrained, little bit of grain...I would think maybe the tweeter and the small midrange would flow better into the mid bass drivers but they seem to sound more isolated from them...not a seamless flow.

    Perhaps it's a setting I overlooked, any input appreciated.
  • dpowelldpowell Posts: 2,818
    I'm wondering if some of the sound issues you are experiencing could be due to the speaker needing to be broken in? The graininess issue is really surprising. As you increase volume, do those issues become more pronounced?
    ____________________________________________________________
    polkaudio Fully Modded SDA SRS 2.3TL's + Dreadnaught, LSiM706c, 4 X TC265i Rears, SVS PB13 Ultra x 2
    Pass Labs X1, Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83SE, Sony SCD-C333ES
  • rooftop59rooftop59 Posts: 5,841
    edited January 9
    I had no graininess with my 704 or 703s. I am wondering if this is a bad tweeter as several others on the forum have experienced???
    HT Rig:
    Denon AVR-X4200w; Peachtree Audio NovaPre; B&K TX4430; Bryson BPD-1; Mains: Dynaudio Excite x18; Center - Polk cs400i; Heights, Center Surround - Klipsch KHC - 6 In-Ceiling; Surrounds - Monoprice in-ceiling; Sub - HSU VTF-2 MK5; LG UP870 4K BDP; NVidia ShieldTV
    ;
    Master Bedroom
    Cambridge Azur 551r; Definitive Technology SM45, NHT Super One CI surrounds, Martin Logan Dynamo (original), Squeezebox Touch
  • honestaquarianhonestaquarian Posts: 2,496
    gmcman wrote: »


    The 706C sounds clean, but despite what sounds to be a close match, it seems there is a void somewhere between the upper midrange and the bass...almost slightly grainy for lack of better terms.

    He said the void and the grain is in between the upper midrange and bass. Sounds like it could be a possible issue with the midrange driver. Or just needing more break in.
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
  • gmcmangmcman Posts: 1,488
    dpowell wrote: »
    I'm wondering if some of the sound issues you are experiencing could be due to the speaker needing to be broken in?

    I was thinking (hoping) that could be the case, the 6 1/5" surrounds are somewhat stiff for sure.
    dpowell wrote: »
    The graininess issue is really surprising. As you increase volume, do those issues become more pronounced?

    The graininess I'm hearing could be the over-emphasis on the bias towards the tweeter/small midrange driver and not having that lower mid bass fill. However it still sounds like that....a hint of grain.

    When I turn it up, not much changes. It has bass but it's hard to describe..somewhat tight but not rich.

    The dialog is crisp and effortless though, very easy to understand everything with great detail.
    rooftop59 wrote: »
    I had no graininess with my 704 or 703s. I am wondering if this is a bad tweeter as several others on the forum have experienced???

    The tweeter definitely works, unsure of it's frequency response or if any distortion.
  • ddogddog Posts: 211
    What is the crossover set at?
    I think I read that you ran Audssey but maybe it's set to high..

    I like to run it at 40hz to 50hz... much higher and it starts to thin out or sound to small for my Lf & Rt's

    Then again it's very possible it needs some more breakin in time.
    Put it on a signal gen set at 60 to 80hz and go shopping...
    That'll weak it up.
  • gmcmangmcman Posts: 1,488
    When I ran Audssey, it chose "Large" for L/R, & center, I was going to use that anyway.

    No sub, but the crossover is at 80Hz which concerned me, I cannot select a lower cutoff but I believe that's if I use the sub.

    Unless I'm missing something.
  • ddogddog Posts: 211
    I'm not familiar with Audssey at all. But on my Anthem avm60 it doesn't have large or small. It goes by crossover steps starting at 40hz on up per-chennal. If you select off then you loose the sub for the most part...

    What happens if you set it to small, will it let you set the crossover points lower?

    Do you have a signal test disc that will run tones below 80hz?
    This will help you see where the roll-off is...
  • DSkipDSkip Posts: 16,109
    Give it time to break in.
  • honestaquarianhonestaquarian Posts: 2,496
    With Audyssey when you set any of the speakers to "large" there is no crossover at all to the sub for that particular speaker.
    I agree with @DSkip to give it time to break in.
    Doug have you been running sound through the center continuously (meaning non stop) for the entire week to break it in?
    If you haven't then it will take FOREVER to break in.
    Living room Home theater: Upgrade Company modified Onkyo PR-SC5509,Sunfire Cinema grand Signature 5 channel amp(1st gen),Carver TFM-45,Carver M-400a,Panasonic TC-P50ST60 50" Plasma(last gen before Plasma production stopped)Pioneer Elite DVL-91,Meridian 519 Dolby AC-3 RF Demodulator,Oppo Digital UDP-205,TiVo Bolt VOX,Nakamich BX-300,Technics SL-1200MKII,Shure V15 Type VxMR cartridge,Polk SDA-SRS 3.1 TL(with RD-0198 tweeters, upgraded with Larry's rings, black hole5,an Avel-Lindberg 1000VA isolation transformer, VR3 customer crossovers and internal wiring),Polk CS-1000P(with SL-6506 tweeter),Polk Monitor 5jr(with RD-0194 tweeters),Polk RT-35i (1),Polk Mini Monitors,Polk PSW150(4)Monster Power HTPS 7000 MKII Signature series,Monster Power AVS 2000 Signature Series,Various MIT,Monster,Upgrade Company and Belden interconnect,power,HDMI,Coax and Toslink Digital and speaker cables.

    Bedroom 2 channel system:Integra DTM 40.4,Nakamichi BX-100,TiVo mini,Musical Fidelity X-LPS,X-PSU,Carver TFM-25,Sony KV-34XBR970(last of the widescreen tube sets before production stopped)Technics SL-1200MKII,Shure V15 Type V MR cartridge,Polk RT-55(with SL-6506 tweeters),Polk PSW-200 in plexiglass(2),Sony Playstation 3 slim.Monster Power HTPS-7000,Monster AVS-2000, PowerVarious Kimber,Audioquest and MIT interconnects and speaker cables.
  • gmcmangmcman Posts: 1,488
    Haven't been feeding it non-stop, so I agree that will extend any break in. Perhaps it does need more time...it's a large gap for it to overcome if that's the case but I've been through that before.

    I did run a frequency sweep and it responds well from 30Hz on up.
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!