New 1C Purchase Questions

13»

Comments

  • Last thing was to install spikes bought here:
    https://meniscusaudio.com/product/mirror-image-pts-gold/
    I started by removing the plastic feet on the bottom cap. Then I drilled a 7/32" hole, sprayed a little water in it, added a drop of Guerilla glue, then screwed in the stud. This anchors them in solid. cqqel85fewl3.jpeg
    9of6k1elwz15.jpeg
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • The expansion actually allows it to penetrate the pores in the wood and fill any gaps in the studs' threads. I've used this stuff on a boat I restored and it is wicked strong. Epoxy would have been a PITA because I needed such a small amount in each hole. I may use epoxy to anchor the spike bases to the cap though. Haven't decided if that's necessary yet.

    I like these spikes because you can tilt the speakers back and unscrew the points, get placement dialed in, then reinstall.
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • pitdogg2pitdogg2 Posts: 12,083
    edited February 2018
    On similar speaker bottoms I have just ran a bolt/washer through from inside the cabinet and tightened down good and tight on the same spikes. I buy mine in 1/4" x 20tpi pattern and just buy some new bolts instead of the threaded rod sent with.
  • verb wrote: »
    Hey I noticed you put some dynamat on the brace in between the MW's. Never seen that before. Is that recommended?

    I tapped along the cabinet area looking for potential resonance points and found that and in the center of the 4 drivers as questionable. May have been unnecessary but WTH. Can't hurt right??? :#
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • audioluvraudioluvr Posts: 605
    Well finally got my crossovers back from @westmassguy and after getting them hooked up correctly... (Thanks Dave. What would we do without you) I've been running them low volume 24/7 to burn in the new components and the dreadnaught. First impressions are VERY good! I'm noticing things like the ring of piano keys sounding like the piano is in the living room with me. I know how this sounds because, up until recently, there was a piano in here. Details in strings and drums are present now. I wasn't alone during my initial audition but I actually had to turn it down on the first track of Spin Doctors - Pocket Full of Kryptonite because everyone, including myself, jumped. These put out more sound than the Klipsch KG4's I replaced them with! Hopefully this weekend I can give them a more thorough review.

    epl1hi6tmmbt.jpg
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • motorhead43026motorhead43026 Posts: 2,974
    What do ya have on the RH wall under cover? Looks like it could be a motorcycle? Only asking because many years ago I keep my brand new 1978 Triumph Bonneville in the kitchen.
    2 channel: Anthem 225 Integrated amp; Parasound Ztuner; TechnicsTT SL1350; Vincent PHO-8 phono pre; Marantz CD6005 spinner; Polk Signature S60's with ZU Audio IBIS jumpers; Cables: Wireworld Eclipse IC; Audioquest Big Sur IC; ZU Audio Mission speaker cables; PS Audio AC-3 power cords, all into a PS Audio Dectet Power center.

    All TV's sound enhanced by Polk Magnfi Mini's.

    Other; SDA2BTL's, M10 series II, M7C's, Hafler XL600 amp, RB-980BX, Parasound HCA-1500 amp , P5 preamp, all in storage. All speakers have had crossover rebuilds, resulting in a small fortune invested in Sonicaps, and tweeter upgrades.

    Political memes posted as fact and accepted as fact, are sign language of the ignorant, for the ignorant

    tonyb said " but even socialists can do a good thing here and there

    Social media makes dumb people dumber and smart people dumb and dumber.
  • Viking64Viking64 Posts: 3,672
    What do ya have on the RH wall under cover? Looks like it could be a motorcycle? Only asking because many years ago I keep my brand new 1978 Triumph Bonneville in the kitchen.

    I used to keep my brand new 1978 Pontiac Bonneville in the kitchen.

    uc4kd9r81alx.jpg
  • westmassguywestmassguy Posts: 6,218
    audioluvr wrote: »
    Well finally got my crossovers back from @westmassguy and after getting them hooked up correctly... (Thanks Dave. What would we do without you) I've been running them low volume 24/7 to burn in the new components and the dreadnaught. First impressions are VERY good! I'm noticing things like the ring of piano keys sounding like the piano is in the living room with me. I know how this sounds because, up until recently, there was a piano in here. Details in strings and drums are present now. I wasn't alone during my initial audition but I actually had to turn it down on the first track of Spin Doctors - Pocket Full of Kryptonite because everyone, including myself, jumped. These put out more sound than the Klipsch KG4's I replaced them with! Hopefully this weekend I can give them a more thorough review.

    epl1hi6tmmbt.jpg

    My Pleasure Sir.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • audioluvraudioluvr Posts: 605
    edited March 2018
    What do ya have on the RH wall under cover? Looks like it could be a motorcycle? Only asking because many years ago I keep my brand new 1978 Triumph Bonneville in the kitchen.

    It's a Keyston Saddle.
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • dpowelldpowell Posts: 2,809
    F1nut wrote: »
    The Dreadnought will allow you to use any non-common ground amp including mono blocks. The sound is vastly improved using the Dreadnought even with common ground amps.
    Guess I need to get off my lazy azz and get to building mine...

    Yes you do John! ;)
    ____________________________________________________________
    polkaudio Fully Modded SDA SRS 2.3TL's + Dreadnaught, LSiM706c, 4 X TC265i Rears, SVS PB13 Ultra x 2
    Pass Labs X1, Pioneer Elite SC-67, Sunfire Signature Cinema Grande 400, Oppo BDP-83SE, Sony SCD-C333ES
  • SDA1CSDA1C Posts: 2,054
    F1nut wrote: »
    What do ya know, I was right again. After you upgrade the 1C's think about moving to something other than Carver SS power, you'll thank me.

    As arrogant as ever. Love your knowledge Jesse...You and heind end hang out often? Lol
    Sda2.3 (Tweets, Spikes)
    Sda1C (Tweets, Sonicaps, Mills, Boards, Spikes, Rings, Dynamat)
    Rta11T (Tweets, Sonicaps, Mills, Spikes, Rings, Dynamat)
    5jr+ (Tweets, Spikes)
    CS350ls (Sonicap, Spikes)
    12" DXi x 2 (Dayton Plate. Slot ported Custom boxes)


    Sunfire TGP3, Sunfire SIG 425x5, Oppo BDP-93, Belkin PF60, Sony PS3 Slim 320 gig, Technics SL-1360
    DH Labs Prostudio XLR-Toslink-Hdmi,Peps for the Oppo, amp, pre and subs)
  • verbverb Posts: 4,467
    edited March 2018
    I too went down the Carver path. Had 2 M1.0t's, moved to a TFM35x, and with a little enabling and tutelage from Polkies here went down the rabbit hole with a Conrad Johnson MF2300A. All I can say is wow! What a difference!

    And yes, @F1nut Father Jesse was right! :smile:
    Post edited by verb on
    Basement: Polk SDA SRS, Rega RP1 TT, VTL 2.5 Preamplifier, Enlightened Audio Designs CD Transport, Northstar Designs DAC, Conrad Johnson MF2300A Amp, Furman 15PFi Power Conditioner, Wireworld Oasis 8 RCA IC's, MIT Terminator2 Bi-Wire speaker cables
    Office: PC, Marantz CD-1 transport, Marantz AMP-1, Acoustic Technologies Classic Speakers, SVS SB12 Plus Subwoofer, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable
    Spare Room: Dayens Ampino Integrated, Tjoeb 99 tube CD player (modified Marantz CD-38), Project BoxE Bluetooth Streamer, Polk TSi200's
    Living Room: Pioneer SX-N30 Network Receiver, Pioneer PD10AE CD Player, Furman M8-LX Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi Subwoofer
  • Viking64Viking64 Posts: 3,672
    verb wrote: »
    I took went down

    HAHAHA That reminds me of the SCTV skit about the "Western Redundancy Playhouse Theater" where the actors say things two ways, like is common in many old westerns in an attempt to sound more "western", I suppose. :p

    "Hey wife-woman. Git-hop into the kitchen-pantry and fix-cook-up a heaping-mess of food-vittles for that baby-child."
  • verbverb Posts: 4,467
    Viking64 wrote: »
    verb wrote: »
    I took went down

    HAHAHA That reminds me of the SCTV skit about the "Western Redundancy Playhouse Theater" where the actors say things two ways, like is common in many old westerns in an attempt to sound more "western", I suppose. :p

    "Hey wife-woman. Git-hop into the kitchen-pantry and fix-cook-up a heaping-mess of food-vittles for that baby-child."

    Foiled again! Got me Jimmy! :smile:
    Basement: Polk SDA SRS, Rega RP1 TT, VTL 2.5 Preamplifier, Enlightened Audio Designs CD Transport, Northstar Designs DAC, Conrad Johnson MF2300A Amp, Furman 15PFi Power Conditioner, Wireworld Oasis 8 RCA IC's, MIT Terminator2 Bi-Wire speaker cables
    Office: PC, Marantz CD-1 transport, Marantz AMP-1, Acoustic Technologies Classic Speakers, SVS SB12 Plus Subwoofer, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable
    Spare Room: Dayens Ampino Integrated, Tjoeb 99 tube CD player (modified Marantz CD-38), Project BoxE Bluetooth Streamer, Polk TSi200's
    Living Room: Pioneer SX-N30 Network Receiver, Pioneer PD10AE CD Player, Furman M8-LX Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi Subwoofer
  • Viking64Viking64 Posts: 3,672
    verb wrote: »
    Foiled again! Got me Jimmy! :smile:

    When I'm editing, I constantly see remnants of ideas and phrases that didn't quite get deleted. Trust me. You are in excellent company. :)
  • verbverb Posts: 4,467
    Viking64 wrote: »
    verb wrote: »
    Foiled again! Got me Jimmy! :smile:

    When I'm editing, I constantly see remnants of ideas and phrases that didn't quite get deleted. Trust me. You are in excellent company. :)

    I just wanted to see if you were still out there! Yeah right. :smile:
    Basement: Polk SDA SRS, Rega RP1 TT, VTL 2.5 Preamplifier, Enlightened Audio Designs CD Transport, Northstar Designs DAC, Conrad Johnson MF2300A Amp, Furman 15PFi Power Conditioner, Wireworld Oasis 8 RCA IC's, MIT Terminator2 Bi-Wire speaker cables
    Office: PC, Marantz CD-1 transport, Marantz AMP-1, Acoustic Technologies Classic Speakers, SVS SB12 Plus Subwoofer, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable
    Spare Room: Dayens Ampino Integrated, Tjoeb 99 tube CD player (modified Marantz CD-38), Project BoxE Bluetooth Streamer, Polk TSi200's
    Living Room: Pioneer SX-N30 Network Receiver, Pioneer PD10AE CD Player, Furman M8-LX Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi Subwoofer
  • audioluvraudioluvr Posts: 605
    verb wrote: »
    I too went down the Carver path. Had 2 M1.0t's, moved to a TFM35x, and with a little enabling and tutelage from Polkies here went down the rabbit hole with a Conrad Johnson MF2300A. All I can say is wow! What a difference!

    Ya, ya, ya. Maybe I'm not playing my music loud enough... Since having my 1.0 rebuild done, there is a HUGE improvement from how it sounded prior. BUT. You rotten bastadges are making me look. Damn it! Just really hesitant to spend without doing an A/B comparison. There is an Aragon 8008BB and a Sonic Frontiers SFS80 that I have been eyeing...
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • audioluvraudioluvr Posts: 605
    Viking64 wrote: »
    HAHAHA That reminds me of the SCTV skit..

    GOD do I miss SCTV. They just don't make TV like that anymore
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • verbverb Posts: 4,467
    Hehe. Are you gonna make @f1nut proclaim he is RIGHT once again? Lordy help us!
    Basement: Polk SDA SRS, Rega RP1 TT, VTL 2.5 Preamplifier, Enlightened Audio Designs CD Transport, Northstar Designs DAC, Conrad Johnson MF2300A Amp, Furman 15PFi Power Conditioner, Wireworld Oasis 8 RCA IC's, MIT Terminator2 Bi-Wire speaker cables
    Office: PC, Marantz CD-1 transport, Marantz AMP-1, Acoustic Technologies Classic Speakers, SVS SB12 Plus Subwoofer, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable
    Spare Room: Dayens Ampino Integrated, Tjoeb 99 tube CD player (modified Marantz CD-38), Project BoxE Bluetooth Streamer, Polk TSi200's
    Living Room: Pioneer SX-N30 Network Receiver, Pioneer PD10AE CD Player, Furman M8-LX Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi Subwoofer
  • audioluvraudioluvr Posts: 605
    verb wrote: »
    Hehe. Are you gonna make @f1nut proclaim he is RIGHT once again? Lordy help us!

    That's beneath him...
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • SchurkeySchurkey Posts: 1,785
    audioluvr wrote: »
    There is an Aragon 8008BB and a Sonic Frontiers SFS80 that I have been eyeing...
    The 8008 will require a jumper wire across the negative terminals, or an isolation transformer (Dreadnaught) in the SDA cable, to overcome the 20-ohm resistance preventing "true" common-ground of the negative terminals.

    Aside from that...very recommended.
  • audioluvraudioluvr Posts: 605
    Dreadnaught... Got one!
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
  • pitdogg2pitdogg2 Posts: 12,083
    edited March 2018
    audioluvr wrote: »
    There is an Aragon 8008BB that I have been eyeing...

    Great amps the 8008 and 4004 series made by Mondial designs. I have not heard the newer amps by Klipsch or Indy audio designs.
    Mondial designs had others beside those two but they were much more expensive.

  • audioluvraudioluvr Posts: 605
    That's some seriously long reading...
    Home System: see
    SDA 1C's - Full mod with the help by Dave...
    WireWorld Mini-Eclipse 7 speaker cables
    800 Va Dreadnought
    B&K Reference 50 Pre
    B&K M200 Sonata Monoblocks
    Cambridge Audio DVD 99
    Sangean HD FM Tuner

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
13»
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!