SDA SRS 2.3tl

zarrdoss
zarrdoss Posts: 2,562
edited February 2013 in For Sale (FS) Classifieds
Since no interest was generated by my reg 2.3's and I am wanting to continue my audio journey up on the chopping block are my 2.3tl's. They have had a couple drivers replaced with the right older vintage ones, new tweeters and the crossovers have been rebuilt with all 1% Daytons and new resistors. I have replaced the grill cloth and side cloth and refinished the wood tops and bottoms. I also replaced the stock badges with smaller "Polk Audio" badges. I have also glued the magnets. Asking $1200 Firm.
The 2.3 are still for sale, which ever sells first I will keep the other unless somebody wants to give me $2000 for both;)
If somebody buys both pairs I will throw in a 6511 and a 6510 older vintage two newer 6511 and two Sonance 60wpc amps.
any interests or questions please take to PM. Thank you!

link to the 2.3's http://www.polkaudio.com/forums/showthread.php?t=107986

Attachment not found.

Attachment not found.

Attachment not found.

Attachment not found.

Attachment not found.

Attachment not found.
Post edited by zarrdoss on
· Share on FacebookShare on Twitter
«13

Comments

  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    bump
    · Share on FacebookShare on Twitter
  • Loud & Clear
    Loud & Clear Posts: 1,538
    edited October 2010
    Very, very nice.

    Two Channel Setup:

    Speakers: Wharfedale Opus 2-3
    Integrated Amp: Krell S-300i
    DAC: Arcam irDac
    Source: iMac
    Remote Control: iPad Mini

    3.2 Home Theater Setup:

    Fronts: Klipsch RP-160M
    Center: Klipsch RP-160M
    Subwoofer: SVS PB12NSD (X 2)
    AVR: Yamaha Aventage RX-A2030
    Blu Ray: Sony BDP-S790
    TV Source: DirecTV Genie
    · Share on FacebookShare on Twitter
  • TrashyTrucker
    TrashyTrucker Posts: 225
    edited October 2010
    Dude,
    Youre' like 900 miles away from me :mad:


    Matt
    Integra DTR 50.2 used as a preamp
    Rotel RCD 1520 cdp
    AudioQuest Jaguar 72v dbs ic's
    AudioQuest type 8 wire
    biamped to:
    2-Hafler 9500 trans nova's
    AudioQuest NRG-3 power cable's
    dedicated AC line for
    Tesla Plex 20a duplex receptacle
    Panamax Max 7500 pro surge/line conditioner
    SDA SRS 3.1 TL's modded...
    spikes, rdo's, rings, dynamat, sonicaps, mills & aeon
    Panasonic Viera G20 50" plasma


    ...SDA's are just like candy for your ears...
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    TrashyTrucker wrote: »
    Dude,
    Youre' like 900 miles away from me :mad:


    Matt

    Road trip
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    $1100
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited October 2010
    You must really be loving those carvers!!!
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    TOOLFORLIFEFAN wrote: »
    You must really be loving those carvers!!!

    Yeah, I replaced the caps on the high side and what a difference, now I am thinking about active cross-over and bi amping. I am looking to get a welder for home, or try some maggies.:smile:
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    $1000 final price.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited October 2010
    That is a killer price!!!!! Upgrades and all.

    Audio Alan needs to jump on these and sell his SRS's ;)

    I'm still shocked your parting with them Kevin. You don't happen to have an extra Pin/Blade cable do you??
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited October 2010
    TOOLFORLIFEFAN wrote: »
    That is a killer price!!!!! Upgrades and all.

    Audio Alan needs to jump on these and sell his SRS's ;)

    I'm still shocked your parting with them Kevin. You don't happen to have an extra Pin/Blade cable do you??

    Thanks, I hate to get rid of any of them, but in order to take another step forward something has to go. I might head to Cherry creek audio today and check some stuff out. No I don't have a extra pin blade Larry.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited October 2010
    Thanks Kevin.

    There have been so many SDA's for sale in Colorado lately and these are the best for ones money right now. Plug and play, new tweeters, crossovers = no brainer IMO!!

    Someone jump on these!!
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • raffi
    raffi Posts: 114
    edited October 2010
    I can't take it anymore...pm sent!
    2 channel rig: MMF 2.2 turntable, Adcom GFP-715, Adcom GFA-555, Adcom ACE-515, Carver M-1.0t, Denon 5900 CD/SACD, SDA-SRS 2.3s (Zardoss modded), AQ Diamondback & King Cobra IC's and AQ Type 4 speaker cables

    HT rig: Panny 50" G20 plasma, Directv DVR, Insignia BRD/DVD/SACD/DVD-A, Denon AVR-890, Fronts: Polk Monitor 70's, Rears: Deftech Mythos Gems, Center: Polk CS1, Sub: Polk PSW-505
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited November 2010
    sorry man I was only selling these because I was wanting to get some other speakers on CL that I missed out on,

    these are no longer for sale.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited November 2010
    I find myself happy your keeping them for the moment. Now come down and pick up these rings for them you will be happy you did...
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • audio_alan
    audio_alan Posts: 770
    edited November 2010
    TOOLFORLIFEFAN wrote: »
    That is a killer price!!!!! Upgrades and all.

    Audio Alan needs to jump on these and sell his SRS's ;)

    I'm still shocked your parting with them Kevin. You don't happen to have an extra Pin/Blade cable do you??

    Dang, I didn't see his price cut. That definitely was a great deal considering all the upgrades. But I would have been tempted to buy them AND keep my SRS's! :biggrin: Looks like they're off the chopping block for now though...
    · Share on FacebookShare on Twitter
  • raffi
    raffi Posts: 114
    edited November 2010
    No worries, you kept them for the right reasons & I know how hard it is to work out these deals...it's all good.:smile:
    2 channel rig: MMF 2.2 turntable, Adcom GFP-715, Adcom GFA-555, Adcom ACE-515, Carver M-1.0t, Denon 5900 CD/SACD, SDA-SRS 2.3s (Zardoss modded), AQ Diamondback & King Cobra IC's and AQ Type 4 speaker cables

    HT rig: Panny 50" G20 plasma, Directv DVR, Insignia BRD/DVD/SACD/DVD-A, Denon AVR-890, Fronts: Polk Monitor 70's, Rears: Deftech Mythos Gems, Center: Polk CS1, Sub: Polk PSW-505
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited November 2010
    but there are these 2.3tl for 800 in co springs

    http://cosprings.craigslist.org/ele/2025387943.html

    and these 2.3tl in Denver for 950

    http://denver.craigslist.org/ele/1998013892.html

    I also have my upgraded 2.3 on the chopping block for 800 still
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited November 2010
    TOOLFORLIFEFAN wrote: »
    I find myself happy your keeping them for the moment. Now come down and pick up these rings for them you will be happy you did...

    Thanks man. but you need to name the date and time youre way more busy than me these days.:wink:
    · Share on FacebookShare on Twitter
  • audio_alan
    audio_alan Posts: 770
    edited November 2010
    zarrdoss wrote: »
    Thanks man. but you need to name the date and time youre way more busy than me these days.:wink:

    I second that! I believe Larry still has a set of rings for me too. Maybe I could meet both of you guys at the same time...
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited November 2010
    audio_alan wrote: »
    I second that! I believe Larry still has a set of rings for me too. Maybe I could meet both of you guys at the same time...

    I am up for it and have most weekends off.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited November 2010
    Cool we will do.. Beleive it or not I am finally putting rings in my 1C's tonight..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    these are back on the chopping block, we have to move and simply need the money more than the speakers right now. $ 1000 cash firm.
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    bump
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    bump
    · Share on FacebookShare on Twitter
  • audio_alan
    audio_alan Posts: 770
    edited May 2011
    Must.... resist..... urge. :biggrin:

    My biggest problem would be where to put them. People already think my house looks like a speaker store sales floor. Not to mention, those have 198's, and all of my other Polks have SL-2000's (and soon to be 194's).

    Good luck with the sale! I'll let you know if I change my mind. :rolleyes:
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    audio_alan wrote: »
    Must.... resist..... urge. :biggrin:

    My biggest problem would be where to put them. People already think my house looks like a speaker store sales floor. Not to mention, those have 198's, and all of my other Polks have SL-2000's (and soon to be 194's).

    Good luck with the sale! I'll let you know if I change my mind. :rolleyes:

    OK thanks, had to move them yesterday by myself, not fun but definitely not going to be able to use them where we are moving too.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,340
    edited May 2011
    This is the last of your polks? Right?? Hate to see you letting them go.. if they were 3.1's I would have been there by now.. LOL

    Good luck with the sale and the move Kevin!! Where are you moving to??
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • grimmace19
    grimmace19 Posts: 1,429
    edited May 2011
    If only I had the money to finish my basement off so I'd have a place to put these... If you need someone to hold them in storagE let me know!
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    Yes the last of the Polk's. I don't want to get rid of them but need the money more now anyway. I have only room to set up one system. Our landlord just decided to put our place on the market and we didn't want to be part of that fiasco so we found a place and are moving, only thing is we didn't pay rent for this month and paid the other guy and need to get out ASAP so its a marathon move. Moving to another part of town but no basement, but it is a house, and I am guessing the living room will sound great. Well crap I have been up working and moving since 5 am and am tired.
    · Share on FacebookShare on Twitter
  • zarrdoss
    zarrdoss Posts: 2,562
    edited May 2011
    Update. we came back to the old house after moving some stuff and there was a foreclosure notice on the door, I am glad I have good instincts and we decided to move and have the bulk of out stuff out.

    and BTW bump.
    · Share on FacebookShare on Twitter