-
Re: SDA 1C driver repair question
If it ohms out ok, then this can be done as I've done a couple myself. If it is mangled, it needs a new coil.2 · -
Re: SDA 1C driver repair question
6510's and 6511's are all ticking time bombs with this issue. The minimum should be to remove dust cap, shim coil and then re-glue. You have a 50-50 chance that it is fixed if you just glue the spide…1 · -
Re: Francis Scott Key Bridge collapse in Baltimore
One possibility...2 · -
Re: Must try MOD - Foam inside the stamped steel baskets - YES!
And to make the magnet/pole-piece removable would be gold.1 · -
Re: Must try MOD - Foam inside the stamped steel baskets - YES!
Shrinkflation is real. :D In other news, did a test run. I took a 3/8" wide wood chisel to an MW that had a torn surround and badly creased cone. About every 1/4 turn of the perimeter I put a dr…1 ·