Post a picture.....any picture...part deux...
Options
Comments
-

XXV -

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
-
Speed & distance, it’s a fact.
-

Going to see Mr. Trower Oct. 3, saw him last time he was in town in 2014.Since we don’t know where we are going we have to stick together in case someone gets there….Ken Kesey.
Idolizing a politician is like believing the stripper REALLY likes you.
And the boots you lick will stomp you too. -
motorhead43026 wrote: »

Going to see Mr. Trower Oct. 3, saw him last time he was in town in 2014.
I saw him in the 90's in a small club. It was awesome. Enjoy!! -

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
My Canon ImageClass MF445dw has been working flawlessly for over 6 years now and only one toner purchase. Previous to that, I had a Brother laser printer that worked fine for over 10 years and was still working fine, but I wanted a combo scanner after my previous flatbed Epson scanner died. I think it's the ink jet printers that cause all the rage.
-

VR3 SDA SRS 1.2TL Duelund Monoliths+VR31000va Dreadnaught +VR3 MM2 SDA cable,
,Lumin u2x ,<-sfp fibre <-LHYas8 Pro+ Switch,Transparent Reference MM2 xlr,power and speaker cables.FTA Sinope SE usb.40 Amp power line for amp with earth stake&Faraday shield ,20 Amp power line for digital equipment ->shunyata 8 venom power board...Working on it! -

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
SCompRacer wrote: »

You'll need 1.74 gigawatts for that -

VR3 SDA SRS 1.2TL Duelund Monoliths+VR31000va Dreadnaught +VR3 MM2 SDA cable,
,Lumin u2x ,<-sfp fibre <-LHYas8 Pro+ Switch,Transparent Reference MM2 xlr,power and speaker cables.FTA Sinope SE usb.40 Amp power line for amp with earth stake&Faraday shield ,20 Amp power line for digital equipment ->shunyata 8 venom power board...Working on it! -

“Human beings are born with different capacities. If they are free, they are not equal. And if they are equal, they are not free.”
― Aleksandr Solzhenitsyn -

-

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
___________________________________________________________ken brydson wrote: »
I love this^^^^ - already sent email with story link (babylonbee) to my best MATE!
She has a relatively new Honda Accord with almost every option possible. She has experienced this concept while driving into her garage. To enter her garage, she has to approach the garage door while making a slight left-hand turn.
Twice, she has hit the side of the door opening with the mirror on the passenger side of the car. The mirror has quite a few features. The first time she hit the side of the door with the mirror, the cost to repair/replace the mirror was a more than $1,500 and it took the Honda Dealer several months to get the parts.
The first replacement mirror lasted about a year. Then earlier this year, I noticed tape on the mirror covering a crack and holding it together. Yes, she hit the side of the door opening again. She has chosen not to repair it immediately.
It is certainly a fact of SPEED & DISTANCE as @skipshot12 said.
She drives too fast into the garage and cannot judge the correct distance from the mirror to the side of the door opening. I have been in the passenger seat many times when she has almost hit the door opening.
****Mirror similar to this one****
I sent the story link, and I asked "Maybe you need a hanging tennis ball on the right of garage where mirror hits?"
(She is not going to like the story either because it is something that has singled out a weakness of the female pilots vs. the male pilots)"Sometimes you have to look to the past to understand where you are going in the future"Harry / Marietta GA
-
Were you aware that Phil began his career in the entertainment world as a child actor? 🎸 👇️

Phil Collins photographed in 1964 at age thirteen by the Keystone Press Agency, Collins was already starring on stage as the Artful Dodger in Oliver! and appearing as an extra in The Beatles’ film A Hard Day’s Night.
🎸 At just thirteen years old, Phil Collins was on stage in the West End and sitting in the crowd for The Beatles’ film A Hard Day’s Night."Sometimes you have to look to the past to understand where you are going in the future"Harry / Marietta GA
-
Anyone on Polk used this ferry?



Over more than 370 years, the Rocky Hill-Glastonbury Ferry has survived wars, floods, technological changes, and repeated changes in the vessels that make the crossing. It closes during the winter and has experienced temporary interruptions because of flooding, mechanical problems, and other events. None of the original equipment survives, but the service continues."Sometimes you have to look to the past to understand where you are going in the future"Harry / Marietta GA
-

My 70 Challenger T/A, the brother of that Cuda AAR.
Bought her for $4k in 1979 then sold 6 years later for the same.
One I should have held onto.
-

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
SCompRacer wrote: »

Exit 420 would be better -

Most people just listen to music and watch movies. I EXPERIENCE them.
“Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
--Mark Twain.
“If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright -

Most people just listen to music and watch movies. I EXPERIENCE them.
“Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
--Mark Twain.
“If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright -
This content has been removed.
-
One of my favorites ^^^
Talk about an illusional mind f***!
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
This content has been removed.
-

Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 * -
SCompRacer wrote: »

Giving a rootjob -
SCompRacer wrote: »

Cut scene from Deliverance 😄 -











