Gimpod's Site Download

gimpod
gimpod Posts: 1,793
edited January 2022 in Vintage Speakers
Here you go. Download and uncompress files to an empty folder, load index.html with your internet browser.
I'm not going to release the gerber files period. (Maybe later if my health doesn't improve.)
There will be no group buy or gofundme, so don't ask.
Sorry if I sound like an a$$ but I have my reasons that I don't want to get into here.

Make this a Sticky ?
“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain
· Share on FacebookShare on Twitter

Comments

  • msg
    msg Posts: 10,511
    Thanks very much, Tony. Very excellent of you to make this knowledge available to us.
    I disabled signatures.
    · Share on FacebookShare on Twitter
  • Kryten
    Kryten Posts: 79
    I doubt anyone thinks poorly of you. Intellectual property has value. Thanks for the excellent post!
    · Share on FacebookShare on Twitter
  • figit090
    figit090 Posts: 12
    Truly a loss to the SRS SDA community, I'm so happy to have logged in to see this and download the .rar before things were taken down (wouldn't have found this thread if I hadn't seen the announcement banner on the website)

    Thanks for all you've done, Tony! I wish you the best and good health.
    · Share on FacebookShare on Twitter
  • cincycat13
    cincycat13 Posts: 887
    thank you! your work allowed me to have some fun diy!
    · Share on FacebookShare on Twitter
  • AMF007
    AMF007 Posts: 21
    F1 TO THE RESCUE! Thank you for the gimpod site, got it now, digging in to verify
    · Share on FacebookShare on Twitter
  • AMF007
    AMF007 Posts: 21
    Cheers to Tony! The gimpod boards are the bomb! And the info on the gimpod site is great.
    · Share on FacebookShare on Twitter
  • Kleins1
    Kleins1 Posts: 2
    Thanks very much, I have one question: are the crossovers for the SDA SRS the same as the SDA-SRS TL?
    Thank you
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 27,488
    Kleins1 wrote: »
    Thanks very much, I have one question: are the crossovers for the SDA SRS the same as the SDA-SRS TL?
    Thank you

    If you go to the vintage speaker section and look at the SDA thread you'll find the schematics for most all of them.

    https://us.v-cdn.net/5021930/uploads/attachments/1/8/5/1/1/26687.pdf

    https://us.v-cdn.net/5021930/uploads/attachments/1/8/5/1/1/26684.pdf
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 18,258
    Kleins1 wrote: »
    Thanks very much, I have one question: are the crossovers for the SDA SRS the same as the SDA-SRS TL?
    Thank you

    No, they are completely different..
    · Share on FacebookShare on Twitter
  • Kleins1
    Kleins1 Posts: 2
    Thank you very much for your answer.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 52,103
    Has anyone successfully opened those files?
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • billbillw
    billbillw Posts: 7,932
    edited May 22
    I have them all saved on my computer. It saves all the files in a Folder called "Gimpod website". You can access a local version of the Homepage by clicking on the index.html file in the sub-folder. From there, you can navigate and open PDFs much like the original site. If you are having a hard time opening the RAR file, install a free software like 7-Zip to help you. (www.7-zip.org)
    · Share on FacebookShare on Twitter
  • xschop
    xschop Posts: 5,561
    F1nut wrote: »
    Has anyone successfully opened those files?

    And is there a file for the pcb layout?
    Don't take experimental gene therapies from known eugenicists.
    · Share on FacebookShare on Twitter
  • billbillw
    billbillw Posts: 7,932
    xschop wrote: »
    F1nut wrote: »
    Has anyone successfully opened those files?

    And is there a file for the pcb layout?

    No. He had some reasons that he did not want to provide the gerber file.
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 27,488
    edited May 22
    billbillw wrote: »
    xschop wrote: »
    F1nut wrote: »
    Has anyone successfully opened those files?

    And is there a file for the pcb layout?

    No. He had some reasons that he did not want to provide the gerber file.

    Yea, some of us tried to buy the rights to his proprietary files. He was having none of it. I was shocked to be honest.
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 18,258
    pitdogg2 wrote: »
    billbillw wrote: »
    xschop wrote: »
    F1nut wrote: »
    Has anyone successfully opened those files?

    And is there a file for the pcb layout?

    No. He had some reasons that he did not want to provide the gerber file.

    Yea, some of us tried to buy the rights his proprietary files. He was having none of it. I was shocked to be honest.


    Something upset him or there was pressure from an unknown source about the matter.
    Either way, I’m sure someone could have had them copied, or done with a few tweaks if needed, if they knew what they were doing of course.

    I’m grateful to have had my hands on a couple sets through the years..
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 27,488
    Toolfan66 wrote: »
    pitdogg2 wrote: »
    billbillw wrote: »
    xschop wrote: »
    F1nut wrote: »
    Has anyone successfully opened those files?

    And is there a file for the pcb layout?

    No. He had some reasons that he did not want to provide the gerber file.

    Yea, some of us tried to buy the rights his proprietary files. He was having none of it. I was shocked to be honest.


    Something upset him or there was pressure from an unknown source about the matter.
    Either way, I’m sure someone could have had them copied, or done with a few tweaks if needed, if they knew what they were doing of course.

    I’m grateful to have had my hands on a couple sets through the years..

    I've got a pair, NIB.....
    · Share on FacebookShare on Twitter
  • VSAT88
    VSAT88 Posts: 1,367
    F1nut wrote: »
    Has anyone successfully opened those files?

    I had no trouble opening them Jesse. DL then made a new folder called Polk Audio Gimpod then moved the .RAR into the folder and uncompressed with WinRAR. Thank you Tony, thank you very much. For everything!
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 52,103
    He never mentioned to me about being upset or getting pressured.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 52,103
    VSAT88 wrote: »
    F1nut wrote: »
    Has anyone successfully opened those files?

    I had no trouble opening them Jesse. DL then made a new folder called Polk Audio Gimpod then moved the .RAR into the folder and uncompressed with WinRAR. Thank you Tony, thank you very much. For everything!

    Beyond my pay grade.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 18,258
    F1nut wrote: »
    He never mentioned to me about being upset or getting pressured.

    I was just guessing/assuming, from some of his posts about them in the end of all of it, it felt like he wasn’t happy about something to do with them..
    · Share on FacebookShare on Twitter
  • Gardenstater
    Gardenstater Posts: 4,841
    I recall him saying his son(?) might want to resume production in the future and not to ask again.
    George / NJ

    Polk 7B main speakers, std. mods+ (1979, orig owner)
    Martin Logan Dynamo sub w/6ft 14awg Power Cord
    Onkyo A-8017 integrated
    Logitech Squeezebox Touch Streamer w/EDO applet
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    Custom Steve Wilson 1m UPOCC Interconnect
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
    · Share on FacebookShare on Twitter
  • xschop
    xschop Posts: 5,561
    edited May 23
    Hopefully he didn't drill holes all over it deleting half the traces...

    413b9xkz5vdy.jpg

    Post edited by xschop on
    Don't take experimental gene therapies from known eugenicists.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 52,103
    Gardenstater wrote: »
    I recall him saying his son(?) might want to resume production in the future and not to ask again.

    He doesn't have a son.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • skrol
    skrol Posts: 3,474
    F1nut wrote: »
    Gardenstater wrote: »
    I recall him saying his son(?) might want to resume production in the future and not to ask again.

    He doesn't have a son.

    Well, that could be a problem then.
    Stan

    Main 2ch:
    Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.

    HT:
    Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60

    Other stuff:
    Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601
    · Share on FacebookShare on Twitter