Would I benefit from new wire/cables?

wzvt73adjdd9.jpg

Comments

  • dragon1952dragon1952 Posts: 4,707
    What?
    ____________________________
    2 channel - PS Audio Stellar S300 amp, PS Audio DirectStream DAC, audio optimized NUC7i5 running Windows 10 Pro/JRiver MC24, Matrix X-SPDIF 2 USB interface, Blackbird SSD dock with 500 GB Samsung 860 EVO, Tom Tutay modded EE Minimax preamp, Furman Elite 15 Pfi power conditioner, Martin Logan Electromotion ESL speakers, Rythmik F12SE subwoofer, Kimber 4TC speaker wire, Gabriel Gold Reflection V2 IC's, VH Audio power cords, Wireworld USB and HDMI/I2S cables
    Computer - Windows 7/JRiver, Topping D10 DAC, Fostex PMO.4n monitors
  • CH46ECH46E Posts: 1,752
    Yes absolutely! You need to upgrade to some Albanian Skin Effect wires.

    https://parttimeaudiophile.com/2016/09/20/the-far-corners-the-skin-effect-and-albanias-organike-cables/

    And they should smell good too!
  • audioluvraudioluvr Posts: 1,848
    Sorry I only got as far as the meat stick...
    Home System:
    SDA 1C's - Full mod with the help by Dave...
    1000 Va Dreadnought- w/ WireWorld Mini-Eclipse cables
    WireWorld Mini-Eclipse 7 speaker cables
    WireWorld Silver Eclipse IC's
    Cambridge Audio Azur 851N - DAC/Streamer
    Belles 21A Tube Pre
    Belles 350A Reference Amp
    BLE-Design 16mm Power Cables
    Denon DVD 2900

    Barn system:
    SDA SRS 2.3's Full mod done by myself
    Carver C-1 pre
    Carver M1.5t
    BluDenso - Bluetooth receiver/DAC
  • CH46ECH46E Posts: 1,752
    audioluvr wrote: »
    Sorry I only got as far as the meat stick...

    Is this a common problem for you? Just cant get past a meat stick?

    😂😂😁
  • WillowWillow Posts: 9,875
    cables don't matter
    2Ch- B&W 703, SVS PB10 NSD, Marantz NR1607, Parasound 1500a, Pro-Ject Debut Carbon (Yellow) with Acrylic platter, Pro-Ject phono pre, MIT AVT 2 speaker cables, MIT AVT 1 and AVT 2 ICs, XLO Jumpers, Signal Dig Coax, Signal Cable Magic Power Cables x3, Samsung 55JS7000, Harmony 1100, Sony BDP-S6200, Marantz DV-4200 (as Transport), Cambridge Audio DAC Magic100, Monster 3600MKII, Android Mi Box3 and Apple TV. - Pool /Gazebo Yamaha RX-A1010, Polk Patio 25x4, Rotel RDV 1045 (as CDP) MIT AVT3 ICs - Work - Spotify Premium or Neutron App to my FiiO Kunlun into my Grado SR125e

  • BlueFoxBlueFox Posts: 12,592
    Willow wrote: »
    cables don't matter

    At least not for the OP. :)

    Bud - Silicon Valley

    Lumin X1
    Sony XA-5400ES SACD
    Pass XP-22 pre, X600.5 amps
    Magico S5 MKII Mcast Rose speakers, SPOD spikes

    Shunyata Triton v3/Typhon QR on preamp, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • In a manner of speaking.....YES
    George / NJ

    Polk 7B main speakers (1979, orig owner)
    Martin Logan Dynamo sub
    Crown D150 amp
    iFi nano iDSD DAC
    iPurifier3
    iDefender w/ iPower PS
    iFi Mercury 0.5m OFHC continuous cast copper USB cable
    Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14 gauge, ultra low inductance
    Custom Vibration Isolation Speaker Stands and Sub Platform
  • delkaldelkal Posts: 642
    New wires or cables won't help.........But you should strongly consider going from SS to tubes.
  • nooshinjohnnooshinjohn Posts: 21,944
    edited January 13
    Crossover rebuild will help as well. A Dreadnaught will take things to a completely different level. Check with VR3 for a Monastery Level III crossover and you will be set for life.
    The Gear... Carver "Statement" Mono-blocks, TriangleArt Reference SE with Pass Labs Xono Phono Preamp, Walker Precision Motor Drive, ClearAudio Goldfinger Diamond v2 cartridge and Origin Conquerer Mk3c tonearm, Polk Audio "Signature" Reference Series 1.2TL with complete mods, Pass Labs X0.2 three chassis preamp, PS Audio PerfectWave DAC MkII, Krell Evolution 505 SACD Player, Pioneer Elite SC-LX701, Oppo UDP-205 4K Blu-ray player, Sony XBR70x850B 4k, Polk audio AB800 "in-wall" surrounds.

    Saying that it's "too hard" to pursue your dreams is no different than admitting to yourself that you are too lazy to achieve them.

    “If it moves, tax it. If it keeps moving, regulate it. And if it stops moving, subsidize it.”
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!