Record storage

2»

Comments

  • Manticore
    Manticore Posts: 408
    SCompRacer wrote: »
    I built one similar to the one msg posted. I made it in two pieces so it was easier to relocate, minus records of course. I used four 3/8" wood dowels in the sides of base with four holes in the top section. I used some heavy duty casters. Two fixed, two swivel.

    This one holds some popular requests, ~300IIRC. The other 700 are in milk crate type bins. The extra high ones where the albums don't stick out.

    z26ajjm89kfi.jpg

    2gytrey9h4n7.jpg



    Very nice indeed and a great idea. Would you happen to have dimensions for this build? I already purchased the ply wood for original post but, i like this better.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • machone
    machone Posts: 1,471
    I found these at Target.

    rn6podf5pmym.jpg
    Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
    SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
    1KVA Dreadnought

    Marantz SA 8005
    Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
    Yamaha TX-540 Tuner...Sony BDP-S570
    Sony PS4

    Separate subpanel with four dedicated 20 amp circuits.
    1. Amplification 2. Analog 3. Digital 4. Video

    "All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
  • dromunds
    dromunds Posts: 9,969
    Where were they at Target?
  • SCompRacer
    SCompRacer Posts: 8,350
    edited January 2019
    Manticore wrote: »

    Very nice indeed and a great idea. Would you happen to have dimensions for this build? I already purchased the ply wood for original post but, i like this better.

    Thanks for the kind words! I have a basic diagram with dimensions. I made sure there was enough room between top and bottom to comfortably get records out of the lower bin. The sides and fronts are Oak.

    I used a router to slot all joints and a Kreg pocket-hole jig tool for glue and screw construction. It is plenty sturdy. It doesn't flex at when rolling it around loaded. I didn't bother filling the pocket holes since they are not visible. The pic below is of the back side which is usually against a wall.

    v6xncd62m3ld.jpg

    1h8dcm8ysxgt.jpg

    yh8hej8xys9i.jpg

    lilk7aexyzrp.jpg






    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Manticore
    Manticore Posts: 408
    Thanks for the diagram. I will see if i can do it with the one piece of plywood that i purchased. Wood working is not my forte. I don't own a router or the other tool shown.
    I will do my best...photos to follow as soon as i get my butt moving.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • verb
    verb Posts: 10,176
    Love the pocket hole jig @SCompRacer ! On my list of tools to get! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • SCompRacer
    SCompRacer Posts: 8,350
    Manticore wrote: »
    I don't own a router or the other tool shown.

    You can look at renting a router. Places like Home Depot have tool rental. You would need an edge attachment to keep the router on path. Them things will get away from you free hand!

    If not, using more screws would give you more strength.
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • SCompRacer
    SCompRacer Posts: 8,350
    verb wrote: »
    Love the pocket hole jig @SCompRacer ! On my list of tools to get! :smile:

    It's a great tool! I used it to build our L shaped bar too. You can get plugs for the pocket holes too. Glue and knock them in, sand down.

    vm42fmhevrb9.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • CoolJazz
    CoolJazz Posts: 569
    I did a build based on those plans posted at AK. Made this one for a friend.

    97xw7875alh8.jpg

    dz365sz8c578.jpg

    I pretty much used the plans and used modest ply. Added wheels to make it movable.

    CJ
    A so called science type proudly says... "I do realize that I would fool myself all the time, about listening conclusions and many other observations, if I did listen before buying. That’s why I don’t, I bought all of my current gear based on technical parameters alone, such as specs and measurements."
  • SCompRacer wrote: »
    Manticore wrote: »
    I don't own a router or the other tool shown.

    You can look at renting a router. Places like Home Depot have tool rental. You would need an edge attachment to keep the router on path. Them things will get away from you free hand!

    If not, using more screws would give you more strength.

    Good information to know. I asked the boss and she like the first plan better so i have it all cut up and ready to be sanded and put on a finish. Hopefully will be finishing up soon.
    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"
  • muncybob
    muncybob Posts: 2,961
    Jazz, you have a lucky friend!
    Yep, my name really is Bob.
    Parasound HCA1500A(indoor sound) and HCA1000(outdoor sound), Dynaco PAS4, Denon DP1200 w/Shure V15 Type V and Jico SAS stylus, Marantz UD7007, modded Polk SDA 2B, Rythmik L12 sub.
  • jonicont
    jonicont Posts: 277
    I have a storage closet. Stacked modules. Lifted the design from Mapleshade.9co8i9csdtgp.jpg

    Custom--my design--from a friend who used to build real roadcases llj4zwcove5a.jpgg6tgqbc6glr9.jpg


    SDA 2BTL, VPI Prime, Soundsmith Zephyr MKIII, Rogue Ares Magnum, McCormack DNA 0.5 Gold, ARC LS-17se, Cambridge cxn v2, MIT AVT MA ic’s and speaker cables, ps audio stellar power plant 3

  • motorstereo
    motorstereo Posts: 2,042
    Here's my record storage for the past 10 years. It was a discarded fridge that fit perfectly into a former window opening. The window opening is on the backside of the building where it's not visible and I never looked out it anyways. I saw the fridge as an insulated, secure and waterproof box to start with. One afternoon of framing, then added a couple shelves and an led light and I have lighted record storage that doesn't take up floor space inside the listening room. Certainly not something you'll see on an episode of Cribs but it works for me.





  • verb
    verb Posts: 10,176
    Manticore wrote: »
    Lets keep the laughter to a minimum please. Here is my finished attempt at building a record storage box. Please remember i know absolutely nothing about woodworking.
    i0oajkhn1c8v.jpg
    3fxh3551eda0.jpg

    Had i known more i would have not had the screws showing in the final build. I put 3 coats of poly on making sure i sanded lightly between coats. I actually thought the poly would have been thicker than it actually turned out. Maybe i needed 5 coats or more?? I did add some wheels purchased from the depot. I do like the idea of being able to roll it around if needed.

    I must say there is something really nice, satisfying about woodworking. Taking a piece of wood and converting it to something beautiful & useful.

    I found some LED lighting for the bottom compartment. It has a remote, motion detection and four light colors but, the white light is perfect for seeing those albums on the bottom. As for the top i am just using some old desk light i had floating around till i find something a little more attractive.
    5ws3y8qqi9y6.jpg

    Thanks for the original post and all those that chimed in with ideas and plans and finished products. I really liked the 2 piece unit but, when the boss puts her foot down!


    Looking good! :smile:
    Basement: Polk SDA SRS 1.2tl's, Cary SLP-05 Pre with ultimate upgrade,McIntosh MCD301 CD/SACD player, Northstar Designs Excelsio DAC, Cambridge 851N streamer, McIntosh MC300 Amp, Silnote Morpheus Ref2, Series2 Digital Cables, Silnote Morpheus Ref2 Series2 XLR's, Furman 15PFi Power Conditioner, Pangea Power Cables, MIT Shotgun S3 IC's, MIT Shotgun S1 Bi-Wire speaker cables
    Office: PC, EAR Acute CD Player, EAR 834L Pre, Northstar Designs Intenso DAC, Antique Sound Labs AV8 Monoblocks, Denon UDR-F10 Cassette, Acoustic Technologies Classic FR Speakers, SVS SB12 Plus sub, MIT AVt2 speaker cables, IFI Purifier2, AQ Cinnamon USB cable, Groneberg Quatro Reference IC's
    Spare Room: Dayens Ampino Integrated Amp, Tjoeb 99 tube CD player (modified Marantz CD-38), Analysis Plus Oval 9's, Zu Jumpers, AudioEngine B1 Streamer, Klipsch RB-61 v2, SVS PB1000 sub, Blue Jeans RCA IC's, Shunyata Hydra 8 Power Conditioner
    Living Room: Peachtree Nova Integrated, Cambridge CXN v2 Streamer, Rotel RCD-1072 CD player, Furman 15PFi Power Conditioner, Polk RT265 In Wall Speakers, Polk DSW Pro 660wi sub
    Garage #1: Cambridge Audio 640A Integrated Amp, Project Box-E BT Streamer, Polk Tsi200 Bookies, Douglas Speaker Cables, Shunyata Power Conditioner
    Garage #2: Cambridge Audio EVO150 Integrated Amplifier, Polk L200's, Analysis Plus Silver Oval 2 Speaker Cables, IC's TBD.
  • dromunds
    dromunds Posts: 9,969
    Yeah, looking good. You gotta work on that "when the boss puts her foot down" stuff tho. :D
  • Clipdat
    Clipdat Posts: 12,557
    Manticore wrote: »
    Lets keep the laughter to a minimum please. Here is my finished attempt at building a record storage box. Please remember i know absolutely nothing about woodworking.

    I'm not laughing at all, that looks great! Nice job man.
  • EndersShadow
    EndersShadow Posts: 17,517
    NOICE!
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • SCompRacer
    SCompRacer Posts: 8,350
    edited February 2019
    Manticore wrote: »

    Had i known more i would have not had the screws showing in the final build.

    You done good! The rule for visible fasteners is placement, and your upper and lower screw placement match. I bet it wasn't by accident.

    You can tell if poly stops absorbing into the wood. Looks like a uniform sheen under the lights.

    Love the lower LED!

    My little buddy Jasper helps me pick, he has better eyesight for the lower section.

    u0qms9dj7nns.png


    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Willow
    Willow Posts: 10,862
    Clipdat wrote: »
    Manticore wrote: »
    Lets keep the laughter to a minimum please. Here is my finished attempt at building a record storage box. Please remember i know absolutely nothing about woodworking.

    I'm not laughing at all, that looks great! Nice job man.

    I would agree. I don't think I could build something like that
  • Mike Reeter
    Mike Reeter Posts: 4,314
    Manticore wrote: »
    Lets keep the laughter to a minimum please. Here is my finished attempt at building a record storage box. Please remember i know absolutely nothing about woodworking.

    I think you did a very good job, nice selection of LP's it's holding!

  • muncybob
    muncybob Posts: 2,961
    I see more albums that need a home...time to build another! If you are like me, I build one wood thingy(called the prototype model)and then get ideas to improve it and build another that usually looks even nicer.
    Yep, my name really is Bob.
    Parasound HCA1500A(indoor sound) and HCA1000(outdoor sound), Dynaco PAS4, Denon DP1200 w/Shure V15 Type V and Jico SAS stylus, Marantz UD7007, modded Polk SDA 2B, Rythmik L12 sub.
  • Thanks everyone for the flowers! I tried my best and for the most part i am very happy with the build and having WAF on this project.
    dromunds wrote: »
    Yeah, looking good. You gotta work on that "when the boss puts her foot down" stuff tho. :D

    Happy wife happy life!! Its a work in progress or she may say i'm i work in progress.
    I'm just grateful she lets me wear pants every now and then! ;)

    @SCompRacer
    "You done good! The rule for visible fasteners is placement, and your upper and lower screw placement match. I bet it wasn't by accident."

    That's my OCD kicking in. It had to look uniform.

    My buddy told me to set up a jig and... I said the only jig i know of is the Irish jig.

    I don't have a table saw and the blade on my circular saw was old and didn't give me a clean cut ( even when taping the cut line) so i stopped and bought a new blade. Partial damage already done. Glad i had a finishing sander to help remove some product from the off cuts.

    The rest was easy peasy. I pre-drilled holes for the lag bolts to put on the wheel assembly. There was absolutely no splitting of wood at all and they are solidly attached to the bottom. Although i will be careful rolling it when needed. Records do weigh a bit and wheels on carpet can't be good.

    Overall a very satisfying project and i would not hesitate to attempt this again.



    Denon AVR X4200W
    Parasound A23 amplifier
    Parasound A23 amplifier
    LG 65" Ultra HD4k
    LG 4kBR - UP970
    Denon DVM 4800
    Denon DP 3000 turntable
    Saec 308sx tonearm w/
    Dynavector 10x5 cart
    Vincent PHO 701 Phono Preamp
    MIT Avt3 Speaker c's
    Audio Quest Big Sur ic's
    Polk SDA 1C's modded
    Polk LSim 707
    Polk LSiM706c
    Polk RTiA 3's
    Polk 80F/X-RT
    Polk DSW PRO 440wi sub
    Infinity bu2 sub
    "The early Klingon gets the Gagh"