Official SVS owners thread!

11314151719

Comments

  • rpf65rpf65 Posts: 1,827
    Doily?

    Here I thought that states that insist interior decorators be licensed was just another stupid idea. I hang my head in shame at being proven so wrong by the suggestion that a doily be placed on a subwoofer.
  • gfonggfong Posts: 1,051
    Upgraded the feet on my SVS PB12 NSD to the SVS Soundpath feet. Isolated the sub very well and tightened the bass up. Home theatre use only.
  • Tony MTony M Posts: 6,511
    rpf65 wrote: »
    Just a reminder: Subs are stackable.

    You can hardly see my 2 -12" Klipsch subs stacked in the corner. They sounded pretty good too the last time I heard them. But I liked them more I think when there was one on each end of my couch acting as end tables. That couch would rumble from underneath and the back would too. Those were the good old days. B)
    hzvax1i377zh.png
    Most people just listen to music and watch movies. I EXPERIENCE them.
  • polrbehrpolrbehr Posts: 2,154
    gfong wrote: »
    Upgraded the feet on my SVS PB12 NSD to the SVS Soundpath feet. Isolated the sub very well and tightened the bass up. Home theatre use only.
    I saw those on their website the other day, was wondering if they would fit my
    PB12-NSD/2 though, is yours down-firing with the base plate as well?

    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
  • gfonggfong Posts: 1,051
    I have a front firing SVS sub. Do not know if they would fit on the one you have. Give them a call to see!

    (I posted another message but it said it needed approved, if it shows up on here I put the SVS phone number in it) :) good luck with the feet.
  • polrbehrpolrbehr Posts: 2,154
    gfong wrote: »
    I have a front firing SVS sub. Do not know if they would fit on the one you have. Give them a call to see!

    (I posted another message but it said it needed approved, if it shows up on here I put the SVS phone number in it) :) good luck with the feet.
    Thanks, but I don't want to call them. I'm afraid they might not talk me out of upgrading... :)
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
  • gfonggfong Posts: 1,051
    polrbehr wrote: »
    gfong wrote: »
    Upgraded the feet on my SVS PB12 NSD to the SVS Soundpath feet. Isolated the sub very well and tightened the bass up. Home theatre use only.
    I saw those on their website the other day, was wondering if they would fit my
    PB12-NSD/2 though, is yours down-firing with the base plate as well?

    Mine is front firing. I would guess if you have feet on it now that screw in that the Soundpath ones would work. There are 3 different size screw sets that come with them. The instructions said that all SVS cabinet style subs use the 1/4-20 thread size.

    Here is the SVS Customer service phone number from the instruction book 877-626-5623. 9to9 est Monday to Friday. Maybe they could tell you if the feet would fit that plate that is on your sub. Good luck.
  • gfonggfong Posts: 1,051
    polrbehr wrote: »
    gfong wrote: »
    Upgraded the feet on my SVS PB12 NSD to the SVS Soundpath feet. Isolated the sub very well and tightened the bass up. Home theatre use only.
    I saw those on their website the other day, was wondering if they would fit my
    PB12-NSD/2 though, is yours down-firing with the base plate as well?

    Mine is front firing. I would guess if you have feet on it now that screw in that the Soundpath ones would work. There are 3 different size screw sets that come with them. The instructions said that all SVS cabinet style subs use the 1/4-20 thread size.

    Here is the SVS Customer service phone number from the instruction book 877-626-5623. 9to9 est Monday to Friday. Maybe they could tell you if the feet would fit that plate that is on your sub. Good luck.
  • DaveHoDaveHo Posts: 2,021
    polrbehr wrote: »
    gfong wrote: »
    Upgraded the feet on my SVS PB12 NSD to the SVS Soundpath feet. Isolated the sub very well and tightened the bass up. Home theatre use only.
    I saw those on their website the other day, was wondering if they would fit my
    PB12-NSD/2 though, is yours down-firing with the base plate as well?

    I have one of the /2 subs as well. The screws go through the base plate & standoffs into threaded inserts in the cabinet. With long enough screws, I think the Soundpath feet will work just fine. Though you'd likely need the 6 pack they sell instead of the 4.
  • polrbehrpolrbehr Posts: 2,154
    Thanks, I wondered since I see they sell them in 6-packs.

    Thanks @gfong for the info too.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
  • KYFHOKYFHO Posts: 76
    I’ve had my SB16 Ultra for a week now. I gotta say, this thing is amazing! I replaced dual 12” Klipsch subs and couldn’t be happier. I was thinking about going dual but it is absolutely not necessary as this sub fills my room with a ton of headroom to spare (my dedicated room is right at 1200 cf).
    The output of the SB16 is phenomenal and just blows away the Klipsch subs. I added the soundpath isolator feet and that really helped with the rattling of my walls. The first movie I played with this sub was Tron. I never realized the low bass I was missing. With music it’s even better. Expensive but worth it in my opinion.
  • danzilla31danzilla31 Posts: 94
    Man I'm late to this party I'm running 2 PB 2000's in my main system. Was running them with 3 Polk S 60's but you guys got me so spoiled with the 2000's I had to move em to another room and sold the extra one for 3 SVS prime towers for the main room. Those S60's sound GREAT even for straight up stereo listening in my other room. But I ain't gonna lie those Primes are something special. Those PB 2000's ROCK and with the feet ROCK even more. But it's a huge open area and I hafta run em a little hotter then I like the amp doesn't even get warm tho Lol. But I know to get the sound I want I'll need to upgrade First I'm going dual PC 2000's behind the couches for quads then use the trade up to figure out what I want to do for the upgrades on all 4 Lol. s9e29xvcnimj.jpg
    gd5itkcx320e.jpg
    hhmjx3ulcn7c.jpg

  • danzilla31danzilla31 Posts: 94
    F1nut wrote: »
    The Piano Black is beautiful tho.... they do a flawless job... but if it doesn't go with your gear..... oh well you'll just be forced to live with it.... Congrats and enjoy!

    I was concerned about reflections, but after studying things a bit I believe that won’t be an issue. I suppose if it came down to it I could spray a matte black finish on it, but I'm not looking for extra work.

    Hey congratulations on your SB 4000 Svs thinks I'll need dual PB 4000's for my wide open area but I think I'll stick 2 of they're cylinders behind the couches for a near field effect with the fronts well see if I need more. Hope your enjoying your sub always appreciate your insights looking 4ward to your impressions!
  • F1nutF1nut Posts: 40,630
    It's a beast when it needs to be for movies and very musical for the occasional music video.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • mrlorenmrloren Posts: 1,585
    F1nut wrote: »
    It's a beast when it needs to be for movies and very musical for the occasional music video.

    Nothing like a good sub, Bummer you'r on the other side of the country. I would have helped you move that beast. I had no problems with my 85lb VTF 3.
    When I was a kid my parents told me to turn it down. Now I'm an adult and my kids tell me to turn it down.

    Family Room:
    Samsung UN60H,
    Denon AVR-X4400H, Emotiva XPA3 GEN3
    Oppo BDP-93,Sony UBP-X800BM, Sony DVP-NS3100ES, WD Live HUB.
    Main: Polk Signature S60
    Center: Polk CSi-A6
    Front High/Rear High In-Ceiling Polk 80F/X RT
    Surrounds: Polk T15
    Sub: HSU VTF3-MK5

    Bed Room;
    Sony KDF-E42A10,
    Marantz SR5010, BDP-S270
    Main: Polk Signature S20
    Center: Polk Signature S35
    Rear: Polk R15
    Sub: HSU STF-2

    Working Warehouse;
    Sony 2100ES
    Polk RTi4 about 15' up the wall
    Old sony 12" Sub
    Mini tower PC with 400GB of music
  • F1nutF1nut Posts: 40,630
    Moving it was easy enough once I put my thinking cap on. After dead lifting the first, well technically the second one, I quickly figured out how to pack and unpack them without any lifting involved.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • danzilla31danzilla31 Posts: 94
    F1nut wrote: »
    It's a beast when it needs to be for movies and very musical for the occasional music video.

    That was what surprised me the most they're ability to do both movies and music so well. I can't wait to upgrade and experience more of the level of quality your enjoying right now.
  • danzilla31danzilla31 Posts: 94
    F1nut wrote: »
    It's a beast when it needs to be for movies and very musical for the occasional music video.

    That was what surprised me the most they're ability to do both movies and music so well. I can't wait to upgrade and experience more of the level of quality your enjoying right now.
  • joecoulsonjoecoulson Posts: 954
    Proud new owner of an SB16 Ultra
    63a5ey8v4efr.jpeg
    0nd4zgojlef7.jpeg
  • Mikey081057Mikey081057 Posts: 5,598
    Congrats... They should just change the name of that sub to BMF
    HT:Polk LSiM 706 LSiM 705's VR3 LSiM 703's LSiM 702's| Marantz AV7702 | Sunfire TGA-7401 | Oppo BDP-103D | Sony PS4 | Directv Genie HD DVR | Samsung 64" Plasma | SVS PB13 Ultra | MIT EXP 2's (Fronts & Center)

    ManCave: Parasound Halo A21 | Parsound Halo A52+ | Marantz AV7004 AV PrePro | Usher Dancer Mini-x DMD's | Usher BE-616 Center | SVS Ultra Surrounds | SVS SB4000 Sub |Oppo UDP 203 | MIT Shotgun S3's | Marantz SA8004 SACD | Music Hall MMF 5.3se TT w/ Soundsmith Carmen | Mytek Brooklyn DAC+ | HP Elite Slice PC | Samsung 50" SUHD TV | Sony PS4 Pro

    Patio Polk Atrium 8's |Marantz 2252B |

    Office Bluesound Node2 | Polk SDA SRS 2.3 | Marantz 2385 |

    Bedroom Peactree Nova 125SE | Focal 905's | Bluesound Node | SVS SB2000 Sub

    Garage Yamaha R-N303BL | Polk Monitor 5B's

    Closet Yamaha M80 | 2 Polk MP2K subs| Yaqin MC100B with Shuguang Treasures KT 88's & CV181Z's | Tesla E83CC's |
  • F1nutF1nut Posts: 40,630
    You should spike that sub, it'll tighten up the bass.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • joecoulsonjoecoulson Posts: 954
    I will. I just have no feet on it while I verify that’s the best placement. I just got it. It’s so frigging heavy.
  • joecoulsonjoecoulson Posts: 954
    edited July 13
    :o
  • joecoulsonjoecoulson Posts: 954
    F1nut wrote: »
    You should spike that sub, it'll tighten up the bass.
    Done
  • joecoulsonjoecoulson Posts: 954
    Question, if any of you have one of these, if you get really close to the driver w your ear, can you hear what can only be described as “ white noise “? Very faint, still present with no rca connection. Again, you gotta be up on it.
  • F1nutF1nut Posts: 40,630
    edited July 13
    I've got it's baby Huey bother, dead silent, but the sub cable is connected and I'm not pulling it off.

    Is the volume set per your pic at -10dB when you hear the noise?
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


  • joecoulsonjoecoulson Posts: 954
    Yep
  • mlistens03mlistens03 Posts: 2,330
    joecoulson wrote: »
    Question, if any of you have one of these, if you get really close to the driver w your ear, can you hear what can only be described as “ white noise “? Very faint, still present with no rca connection. Again, you gotta be up on it.

    I’ve never owned any SVS subs, but my old Velodyne CHT-10 and VX-10B made this noise, along with my friends BIC America F12 and his old Polk PSW-10.
    Micah

    Main system: Technics SL3200, Shure M97xE, Lafayette LR1100 for tuner, Hagerman Audio Labs Bugle 2 phono stage, NAD C352 integrated, Boston Acoustics VR 2, Boston PV500, generic ICs, and BJC Belden speaker cables.

    Desktop: Dell Precision 690 running iTunes, Yamaha RX-v665, Monitor Audio R90s, Velodyne VA-907, generic ICs and speaker cables.
    I've always thought the goal of high-end audio was not to have your neighbors bang on the wall and say, 'Turn that darn music down' but to have your neighbors bang on the wall and say, 'Tell your friends to go home and you can practice later this week'.
  • joecoulsonjoecoulson Posts: 954
    Almost sounds like a mini fan inside the box. Again it’s quiet, but I wouldn’t think this level of sub would have that noise present. I have emailed SVS to see what they say.
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!