Testing SVS's with Behringer stuff

Options
PolkThug
PolkThug Posts: 7,532
edited December 2004 in Subwoofer Hookup & Bass Management
Behringer ECM8000
Behringer Eurorack UB802

Yay, no more digital meter conversions, etc.

And yes, that is 16.82Hz at 100.2db's!

3 sweeps layered on top:
Never Forget
Post edited by PolkThug on
· Share on Facebook

Comments

  • Dr. Spec
    Dr. Spec Posts: 3,780
    edited December 2004
    Options
    Run your input at 8 kHz. It will slow down badly, but be very accurate below 20 Hz with respect to data acquisition. Looking good Toby!
    "What we do in life echoes in eternity"

    Ed Mullen (emullen@svsound.com)
    Director - Technology and Customer Service
    SVS
    · Share on Facebook
  • PolkThug
    PolkThug Posts: 7,532
    edited December 2004
    Options
    Thanks Doc. I'll try that out tonight.
    Never Forget
    · Share on Facebook
  • gatemplin
    gatemplin Posts: 1,595
    edited December 2004
    Options
    Looks like fun. I plan to get a mic and an RTA program someday. Curve looks pretty decent too.
    Graham
    · Share on Facebook
  • Dr. Spec
    Dr. Spec Posts: 3,780
    edited December 2004
    Options
    Those three spikes at 25, 50, and 65 Hz are just screaming for a PEQ. I could tame that curve in about 15 minutes with TrueRTA and a Rane PE-17.
    "What we do in life echoes in eternity"

    Ed Mullen (emullen@svsound.com)
    Director - Technology and Customer Service
    SVS
    · Share on Facebook
  • PolkThug
    PolkThug Posts: 7,532
    edited December 2004
    Options
    Originally posted by Dr. Spec
    Those three spikes at 25, 50, and 65 Hz are just screaming for a PEQ. I could tame that curve in about 15 minutes with TrueRTA and a Rane PE-17.

    Don't start giving me more ideas!:D My credit card needs to cool off.
    Never Forget
    · Share on Facebook