Polk Audio CRS + (RDO198) Crossover Modification Thread
VR3
Posts: 25,501
Will post some misc pics on this as the build progresses -
Specs are -
External build, custom mounting plate for the back of the speaker
Clarity Cap CMR 400v
Duelund CAST Resistors
Jantzen Inductors + C-Coil
Supra Rondo Internal Wiring
Point to point
WBT Binding Post
DH Labs Q-10 SDA Cable
Specs are -
External build, custom mounting plate for the back of the speaker
Clarity Cap CMR 400v
Duelund CAST Resistors
Jantzen Inductors + C-Coil
Supra Rondo Internal Wiring
Point to point
WBT Binding Post
DH Labs Q-10 SDA Cable
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro
Comments
-
So looking forward to your illustrated progress on this.Home Theater
Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable
2 Channel
Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+
Stuff for the Head
JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365
Shower & Off the beaten path Rigs
Polk Audio Boom Swimmer, Polk Audio Urchin
-
WOW! Most people just listen to music and watch movies. I EXPERIENCE them.
-
Can’t wait to see the finished project.Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
-
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
Where are the installation pics?
-
Hasn't left this side of the pond yet, have a part for Sean coming then they ship out
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
-
-
Be sure to take some pics.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
sounding tight
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
Bet the low end sucks.....
-
Actually, not really. The bass is great with the drivers half towards the floor.- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
Ive always been surprised how the mods sound free air, when you leave the room, you can hardly tell they are free air versus in an enclosure. The bass is not as forceful or the impact but it is there.- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
What's the reason for the caps being on the outside?
-
They wont fit inside Some people also feel external crossovers sound better since they are not exposed to much vibration... ymmv - Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
This is a close representation of what they sound like free air
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
Bad news ,The fedex plane carrying my xovers that Vr3 built crashed around a week ago.
Good news though , the only two box's that were retrievable at the crash site were mine due to their packaging.
Im a little busy right now but i will bang some pictures up when i start the project! -
Ok. Got a lunch break in and installed these x overs. Thank you again to Trey and Dave for your excellent services
Pictures to follow.
Mmmmm. Cant load them from iPhone. B.B. L -
Looking forward to them..
-
I've seen pics, they look like terminators- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
- Not Tom
"No, that's silly talk. Dude, you can't possibly be this audio dumb so quit the act." - Doro -
-
the stands slightly modified from Larry's specs so as to not breech copyrights .19 kilo's of lead shot
-
-
The Notorious Larry's Rings. I find them to be even better after glueing them in, more so in the SRS's.I just wiped power grab along the edge internally making sure that none enters the threaded area.....so how many inch's of steel are in the SRS'S installed with theses rings..? I lovem.
-
Very nice Sean! Enjoy them!Home Theater/2 Channel:
Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
Interconnect: Furez 10/2 with SpeakONs
ICs: Custom Furez by Douglas Connections
Den:
Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
Carver CT-3 Pre, Carver C-500
dhsspeakerservice.com/ -
I see you got the labels off.
Those look bada$$.
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
I thought the factory enclosures could possibly benefit from a front to back cross-brace. Will you reinforce the area you cut out?
Looks great.
