gimpod.com down?
Options
agfrost
Posts: 2,421
It would be a shame if his site went down. Great source of info on the SDA mods, especially with the part-number order info and the interactive diagrams for parts placements on his boards. Was really a big help when I did my 2BTL crossovers.
Trey, you able to add Tony's stuff to your site if Tony's not going to have his site up any longer?
Trey, you able to add Tony's stuff to your site if Tony's not going to have his site up any longer?
Jay
SDA 2BTL * Musical Fidelity A5cr amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
Micro Seiki DQ-50 * Hagerman Cornet 2 Phono * A hodgepodge of cabling * Belkin PF60
Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
SDA 2BTL * Musical Fidelity A5cr amp * Oppo BDP-93 * Modded Adcom GDA-600 DAC * Rythmik F8 (x2)
Micro Seiki DQ-50 * Hagerman Cornet 2 Phono * A hodgepodge of cabling * Belkin PF60
Preamp rotation: Krell KSL (SCompRacer recapped) * Manley Shrimp * PS Audio 5.0
Comments
-
Ya know, I don't think I've seen Tony on here since the format change. I'll give him a call tomorrow.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Jesse, I think I saw him on here acouple times, but it was a number of weeks back. (I may be mistaken). Haven't seen him post in a long while though.
I hope his site will still be "open for business". I agree with agfrost, it's agood one. I just tried it and couldn't get to it either.
I hope Tony is doing OK too.
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."![:\](https://forum.polkaudio.com/resources/emoji/confused.png ":\")
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
Hmmmmm says, "Last Active September 1"Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
I hope the site comes back,, I just used it recently to get the part list and to order the caps and resistors for my sda 1c rebuild, I got the circuit boards from him last year.
There was a great part placement guide/photo on the site. I wish I would had got a screen shot of it.
Hopefully the site is back again soon, great resource.I can barely see the road from the heat comin off it -
I spoke with Tony tonight, he wasn't aware that his site was down and will look into it.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Tony's site was valuable when I did Carl's 2.3 xovers with gimpod boards. His schematic included jumper info where Polk's schematic does not.Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
-
Invaluable indeed, it is logical and well thought out making it a pleasure to use. A great example of done right as opposed to.........ummmmm, you know.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Thanks for looking into it Jesse. I would have had a heck of a time redoing my 2.3TL's and CRS+ (still work in progress) without it. It's a great asset for SDA modders."Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
-
FYI I just got an email from Sal (He's hosting the site) and he said the last time he checked it was working fine and that he would look into it when he got home.
Same with me last I checked everything seemed fine. I've been laid up with skin issues for the past couple mouths trying to heal up my a s s. Got a new wheelchair about 6-7 mouths ago but it just doesn't seem to be working out all that well.
Also I have a complete backup of the site so if something bad has happened all is not lost.“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
FYI I just got an email from Sal (He's hosting the site) and he said the last time he checked it was working fine and that he would look into it when he got home.
Same with me last I checked everything seemed fine. I've been laid up with skin issues for the past couple mouths trying to heal up my a s s. Got a new wheelchair about 6-7 mouths ago but it just doesn't seem to be working out all that well.
Also I have a complete backup of the site so if something bad has happened all is not lost.FYI I just got an email from Sal (He's hosting the site) and he said the last time he checked it was working fine and that he would look into it when he got home.
Same with me last I checked everything seemed fine. I've been laid up with skin issues for the past couple mouths trying to heal up my a s s. Got a new wheelchair about 6-7 mouths ago but it just doesn't seem to be working out all that well.
Also I have a complete backup of the site so if something bad has happened all is not lost.
I hope things go better for you soon!!Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
I am trying to rebuild my sda srs xover but unfortunatly the gimpod side went down.
-
Tony actually contacted me , he's fine and we both agree the format and traffic here just does not live up to the former format. For me to get in I had to reregister change p/w -u/n and could not navigate this site all that well. Speaks to my computer illiteracy but many a member went over to AK. As for the gimpod site I was very impressed w/ the interactive feature and should be kept somwhere for those who tackle their own SDA x-overs.2-chl-Adcom555-NAD 1020a pre--JVC QL-200TT--Grado FT+cart--Denon1941cdp--Samson surge pro--Yamaha RX-V665avr-ysd dock-i-pod---Toshiba au40'' flat
'87Polk Audio SDA 2b(modded)--DCM TF 350s-- ADC-303AX--AAL2way--JBL-2060
Nikko 6065 receiver--Sony ns300cpd---JBL g-200 bookies -
Sorry guys it should be working but I have zero access to find out why it's not, It's like my username and password have been revoked and Sal has been crazy busy and hasn't had the time to find out whats going on.
So be patient we'll get it figured out,
Just for tonyb we all probably need some kind of stinking I.D. card to get access.
“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain -
http://www.GIMPOD.com/ is back up!
Great news Sal, thanks a lot!!Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Thank You Sal, You Da Man !!“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain
-
Glad to see you could get it up Tony.Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC
Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords
I’M OFFENDED!!!! -
Way to go guys!"Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
-
Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Glad both Sal and Tony could "get it up!". I hope good times were had.
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
I see the Polk censoring software doesn't work on double entendres "Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
-
Nice to see the rest of you guys are just as sick and perverted as I am.
Just a heads up the site may or may not be a little screwed up for a bit as Sal is transferring it over to me, the domain name (www.gimpod.com) will stay the same but it will be on a different server so bear with while the switch go's on.“The two most important days in your life are the day you are born and the day you find out why.” ~ Mark Twain
