Oppo BDP-83 Special Edition - Sabre 32 DAC
Comments
-
Has anyone heard the new SE??Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
The oppo is esentially a universal player, a good one at that. If your only interest lie in the video and audio for movies,there are plenty players that can keep pace with the oppo,minus some bells and whistles of coarse,and costs way less. Not Taking anything away from the oppo,it appears to be a great universal player by any standard. But one has to wonder, with the next generation possibly comming out with green ray technology, do you really want to spend that much coin on something that may be obsolete in 2 years?
You also have to consider if your video display is up to the task to take advantage of what a player like the oppo has to offer. If you run a 720p display smaller than 42 in. you may not notice the difference in a 800 buck player or a 200 dollar player. With the pace at which technology keeps improving, it's hard for me anyway,to throw gobbs of money down that rabbit hole for shorter periods of time.HT SYSTEM-
Sony 850c 4k
Pioneer elite vhx 21
Sony 4k BRP
SVS SB-2000
Polk Sig. 20's
Polk FX500 surrounds
Cables-
Acoustic zen Satori speaker cables
Acoustic zen Matrix 2 IC's
Wireworld eclipse 7 ic's
Audio metallurgy ga-o digital cable
Kitchen
Sonos zp90
Grant Fidelity tube dac
B&k 1420
lsi 9's -
Has anyone heard the new SE??
Got mine today -- unfortunately it's a Christmas gift so will have to wait until 12:01 AM December 25th to hook it up.
There is a good thread with feedback over at the AVS forum:
http://www.avsforum.com/avs-vb/showthread.php?t=1194011
The thread gets quite technical at times ("modding this and modding that") but I was able to glean enough information to entice me to buy it.Parasound P5 Pre
Marantz AV 7703 Pre/Pro
Outlaw 7500 Amp
Marantz SA14s1 SACD/CD
Rega Planar 2 TT
Polk Audio Speakers: LSiM 705 Fronts, LC65FX Surround, LSiM 704c
Oppo BDP-103 -
Got mine today -- unfortunately it's a Christmas gift so will have to wait until 12:01 AM December 25th to hook it up.
There is a good thread with feedback over at the AVS forum:
http://www.avsforum.com/avs-vb/showthread.php?t=1194011
The thread gets quite technical at times ("modding this and modding that") but I was able to glean enough information to entice me to buy it.
Thanks for the info...That is a long thread:eek:
I just placed my order for the upgrade:DPio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Parasound P5 Pre
Marantz AV 7703 Pre/Pro
Outlaw 7500 Amp
Marantz SA14s1 SACD/CD
Rega Planar 2 TT
Polk Audio Speakers: LSiM 705 Fronts, LC65FX Surround, LSiM 704c
Oppo BDP-103 -
I do not have the SE, but I did just get the standard Oppo today as a gift; won't be able to play with it until I unwrap it officially in a week or so...
-
How much is the upgrade? I'm giving it some thought.Shoot the jumper.....................BALLIN.............!!!!!
Home Theater Pics in the Showcase :cool:
http://www.polkaudio.com/forums/showcase/view.php?userid=73580 -
How much is the upgrade? I'm giving it some thought.
The upgrade is $300 for current owners of the -83. Another plus is that it resets the factory warranty.
Caveat: If you are using HDMI to handle your audio, there is no compelling reason to upgrade (in case you hadn't read up).
I just received my RMA from Oppo today so it's going back tomorrow or Friday. I'm gonna hate going back to my 8 year old Pioneer DV-578A while it's gone but by all indications it's a worthy upgrade for those of us using it mostly for 2 ch analog. I have always felt the -83 was a tad harsh. It seems the new DACs and mods tame that without losing detail, something I feel the Rega Planet2k I have lacks. I dunno. We'll see.
If you are using the mch analog outs, and looking for a serious mod, you may want to check out the NuForce edition. It's even more tricked out on the mch outs.-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
Just got my RMA from Oppo...I might be able to make it over there tomorrow. If not, I'll do it Monday. Turnaround time for us locals is about 3 hours. A friend did his last week. Initial reports from one I trust is that there is a definite improvement in 2 channel performance, marginal in MCH. That's fine, I'd do it just for the 2 channel since I use a separate pre.
I'm sure vc69 will be reporting soon, so next week you'll get some definitive impressions.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
I am anxiously awaiting your thoughts Ron. It's going to be awhile before I hear mine again. Maybe even after the 1st of the year. Get your tail over there!

and... Merry Christmas!-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
The SE is for people that will be listening to analog 2 channel sources connected to the RCA outputs
Thanks, 'Las...
I actually just received my BDP-83 standard issue model which I have been using via HDMI out only for audio and video on BDs and DVDs; I don't use it for two channel listening as I have a dedicated Marantz changer for that. -
Here's an interesting review: http://audioaficionado.org/general-audio-discussion/2991-oppo-bdp-83se-versus-mcintosh-mcd500.html"He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche
-
Nice find...I'm getting excited.Here's an interesting review: http://audioaficionado.org/general-audio-discussion/2991-oppo-bdp-83se-versus-mcintosh-mcd500.html
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Here's an interesting review: http://audioaficionado.org/general-audio-discussion/2991-oppo-bdp-83se-versus-mcintosh-mcd500.html
Looks like Oppo has another winner!Linn AV5140 fronts
Linn AV5120 Center
Linn AV5140 Rears
M&K MX-70 Sub for Music
Odyssey Mono-Blocs
SVS Ultra-13 Gloss Black:D -
Here's an interesting review: http://audioaficionado.org/general-audio-discussion/2991-oppo-bdp-83se-versus-mcintosh-mcd500.html
Face,
Thanks for the link. I shipped my OPPO out for the upgrade Tuesday...Looking forward to hearing it when it returns.Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Can any of you tell me how to upgrade my Oppo with firmware updates using the USB drive? This is my first time using USB to upgrade my Oppo. I always used the Ethernet port to upgrade but Oppo told me earlier that they recommended using the USB or CD method to upgrade because BETA firmware sometimes doesn't go through the Ethernet method.
I have a 1GB USB thumb drive. I need to know how I get the file from Oppo's website to my USB thumb on my computer, how to zip and unzip it. -
i've only used CDRs, but I think it goes like this...download firware to your desktop...run it (or leave it...better check with Oppo on that)...upload to drive...plug drive in 83's USB port...turn on BD...follow the menu...done. Should be simple as that with a couple of minor variations.digitalvideo wrote: »Can any of you tell me how to upgrade my Oppo with firmware updates using the USB drive? This is my first time using USB to upgrade my Oppo. I always used the Ethernet port to upgrade but Oppo told me earlier that they recommended using the USB or CD method to upgrade because BETA firmware sometimes doesn't go through the Ethernet method.
I have a 1GB USB thumb drive. I need to know how I get the file from Oppo's website to my USB thumb on my computer, how to zip and unzip it.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Fortunately, the instructions are on the page that you get the firmware from.
http://www.oppodigital.com/blu-ray-bdp-83/bdp-83-firmware-48-1218B.aspxEquipment list:
Onkyo TX-NR3010 9.2 AVR
Emotiva XPA-3 amp
Polk RTi70 mains, CSi40 center, RTi38 surrounds, RTi28 rears and heights
SVS 20-39CS+ subwoofer powered by Crown XLS1500
Oppo BDP-93 Blu-ray player
DarbeeVision DVP5000 video processor
Epson 8500UB 1080p projector
Elite Screens Sable 120" CineWhite screen -
If you are using the mch analog outs, and looking for a serious mod, you may want to check out the NuForce edition. It's even more tricked out on the mch outs.
http://www.nuforce.com/hi/products/oppo_bdp83se/index.php
If you're interested, I would be sure to read this: http://www.audiocircle.com/index.php?topic=73399.0"He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche -
Got my hands on the SE today. I've got a problem with LFE integration. I was able to apply a 10db boost between my pre and the player to calibrate with the 83. I've had to apply 19db plus increase my gain on the sub for the SE. I've been in touch with Oppo and they are in a quandary about this too. They did a test before they called back and the boost should have been even. I'm going to play with mine for a week or so. If I can't fix this, then they'll do a swap out. Nice folks.
That said, I'm fine now, but the sub doesn't seem as profound, just cleaner. All the rest of the channels are markably more detailed, airy and tone/tuneful. I've just been playing some MCH and a BR, along with the AIX calibration disk to get things to sound right. I've got a rough calibration now. I'm plugging in the Luxman pre for some 2 channel listening later.
First blush, definitely an upgrade. The detail in the surround channels with the new DACs is very noticeable, along with the front 3 integration. Just played Steely Dan's Everything Must Go DVD A, a favorite. Sounds like a speaker upgrade.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
That is strange Ron. I haven't read any reports of that anomaly on the SE thread at AVS. I use only HDMI for MCH so my bass mgmt is done in my receiver.
I am looking forward to your 2ch impressions as that is my only reason for the upgrade.
Mine is on it's way back, but will most likely not arrive before the long weekend. I am bummed.
-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
Yeah it looks like I'm the only one. If it's not my HK, then I'll get a new one, so I can't complain. You'll be impressed with the 2 channel improvement. There are lots of embedded subtleties that come out in the midrange, vocals come forward a bit and the highs exhibitThat is strange Ron. I haven't read any reports of that anomaly on the SE thread at AVS. I use only HDMI for MCH so my bass mgmt is done in my receiver.
I am looking forward to your 2ch impressions as that is my only reason for the upgrade.
Mine is on it's way back, but will most likely not arrive before the long weekend. I am bummed.
more detail and sizzle. There's an apparent increase in separation. For $300 you're getting a heck of an upgrade. Reports of increased bass from others, haven't occurred on my rig...already had plenty...but it is more defined and seems tighter.
That's with 3 hours out of the bag...(which I used to take it back)
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
It's good to hear that you are pleased Ron. Make's me even more antsy to get my hands on mine. I am afraid the shipping gods have frowned on my audio endeavor. My delivery is scheduled for Saturday and as I had it shipped to my work address, nobody will be here to accept delivery. Figures. I have a nice 4 day weekend and cannot take advantage of it. I should have just done this early in December but with Christmas coming up, I wanted to be sure funds would be good to go.
-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
Well, I don't know if this is break in or what, but after only about 4 hours last night, I put it to bed. Today, I decided to recalibrate by dropping the trims on the AVR by 10 dbs, then the drop the trims on the SE by -5dbs except the sub was + 5. First calibration was off. Tried again, made some minor adjusts and then the sub level was a couple of dbs hot. Fiddled again, then put in a DVD A. Sub was there again and I had to reduce the trim on the Oppo down to +3. Which combined with the pre's trim is now 15dbs above the mains...not 19...and it's profound again.
I'm a bit stumped, but if it keeps improving during burn in, I won't have to swap out the unit. I've just never seen that big a correction on any unit I've ever had. Benefits after burn in are usually more subtle.
I'll keep you posted..
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Something doesn't sound right about that to me. I can't see how the SE mod could be causing fluctuations like that. I'm wondering if it's a firmware thing.
Have you posted at AVS about this? The firmware in SE is obviously different as opposed the std. -83 and I know it's fairly new. Perhaps you have found a bug. I'm perplexed.
Still, I'm jealous you have your machine in hand.
-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
The latest non beta firmware update is universal for the 83 and the SE...it's the 1210 firmware and loaded on at Oppo. Don't think it' the firmware...might be the AIX disk...could be the HK...could be break in...but, if it keeps getting better it's a non-issue.Something doesn't sound right about that to me. I can't see how the SE mod could be causing fluctuations like that. I'm wondering if it's a firmware thing.
Have you posted at AVS about this? The firmware in SE is obviously different as opposed the std. -83 and I know it's fairly new. Perhaps you have found a bug. I'm perplexed.
Still, I'm jealous you have your machine in hand.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Ron Temple wrote: »The latest non beta firmware update is universal for the 83 and the SE...it's the 1210 firmware and loaded on at Oppo. Don't think it' the firmware...might be the AIX disk...could be the HK...could be break in...but, if it keeps getting better it's a non-issue.
Ahh... I was under the mistaken impression the devtree was different. Perhaps they have unified the installer routine because the firmware would have to be different in some way to accommodate the differences in DAC's I would think. Maybe not. I Dunno.
Hope it all settles in either way.-Kevin
HT: Philips 52PFL7432D 52" LCD 1080p / Onkyo TX-SR 606 / Oppo BDP-83 SE / Comcast cable. (all HDMI)B&W 801 - Front, Polk CS350 LS - Center, Polk LS90 - Rear
2 Channel:
Oppo BDP-83 SE
Squeezebox Touch
Muscial Fidelity M1 DAC
VTL 2.5
McIntosh 2205 (refurbed)
B&W 801's
Transparent IC's -
More headscratching going on...last night after my recal, I shut things down and went to dinner with my wife. When we came back, we watched a DVD...no sub. I put in a DVD A...no sub. Switched over to HDTV in DD (a different optical connection)...no sub. Deciding that either my analog sub pre out was bad or the sub's amp is getting wonky...or a bad cable, I shut it down for the night.
This morning I started an email to SVS, but then decided to try a couple of things. I put in WOTW DVD to demo a heavy scene. The sub woke up slowly and when I cranked it, it hit hard, but sounded intermitent (this is through the digital optical connection. I then put in a DVD A, MCH, analog connection, Celebrating Weather Report. The sub sounded way hot, not smooth at all, so I recalibrated again and got it to sound smooth and impactful. My mains and surrounds are on set on the pre at -5, on the Oppo @ -5, the sub is now at -0 on the pre and -2 on the player...so now my net boost is 8db...not 19, not 15. I'm not quite stumped...I probably either need a new pre or AVR, a new cable or a new BASH amp in my Ultra. But it all started happening when I put the SE back in the chain and I've got some lingering doubts about signal strength fluctuation from the new sound board.
Anyway, the other channels are to die for and, as noted, it might be the old HK or my 2.5 year old Ultra causing the headache. I did shoot off an email to SVS, but with CES coming up and the holiday, I don't expect a reply soon.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
I just got an email that FedEx has picked my unit up and it is on the way back to me....I can't wait to try it out:DPio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
Well now the upgrade window is officially over (I think). vmaxer, you just got in under the wire
. Enjoy.
BTW, SVS is sending me a new amp.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE




