Emotiva ERC-1 Buy-In for demo
Comments
-
Give it a break William, go crap up another thread.Hardly, even if the wire did make a difference, you can't ignore all the other variables. And if you really do believe it makes a difference, it would only make sense to use the wire you are used to, so you know that it's not the new wire changing the sound. As ridiculous as that whole concept is."He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche -
It would be nice if there was a enough left over to get a pair of ICs for the demo. Otherwise, we will all be using different ICs, which will give different results. The more we can standardize the demo, the more "accurate" our opinions will be.
If there is only a few dollars left over then it might be worthwhile to buy some CDs that are supposed to be the best in regard to sound quality, and include them in the test.
Like these suggestion's alot, though along with the player, all of us are running different gear, (speaker's, receiver, amp, and the like) will be as diverse as all get out, no matter how hard we try to "level" the playing field.:(
Pat.Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
Give it a break William, go crap up another thread.
I think I'll just keep posting when and where I want thanks. You guys never were much for logic. -
Like these suggestion's alot, though along with the player, all of us are running different gear, (speaker's, receiver, amp, and the like) will be as diverse as all get out, no matter how hard we try to "level" the playing field.:(
Pat.
Well put. -
It will be used in completely different systems, in completely different rooms, being compared to completely different players. And of course no one is going to level match the two players they are comparing. You really think wire is a concern? Right.
It was just a suggestion as to how to use any excess dinero. No need to get huffy.Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
Magico S5 MKII Mcast Rose speakers; SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits. -
I think I'll just keep posting when and where I want thanks. You guys never were much for logic.
Bluefox was offering idea's for surplus cash regarding the Demo for the ERC-1, Some nice idea's were offered, we dont want any comment's from the "Peanut Gallery" take your "logic" to another thread.:rolleyes:Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
Bluefox was offering idea's for surplus cash regarding the Demo for the ERC-1, Some nice idea's were offered, we dont want any comment's from the "Peanut Gallery" take your "logic" to another thread.:rolleyes:
Who are you again? -
That's a good point on the cables, but we're all still going to be using different components. Using cables that we're all already familiar with may give each of us a better impression of the improvements/differences that the ERC-1 is making. Adding cables that you're unfamiliar with, may alter your impressions of the CDP, since the cables could be altering your sound as well.
WilliamM2-Go crap up another thread...Bluefox was just making a suggestion. You probably could have stated your thoughts in a slightly less assholeish manner.:rolleyes:
As far as the surplus money is concerned, I'd agree with either using it for shipping costs, or for some cables. If we wanted to use it for cables, we could start sending the cables along in the same order, after the first few demo's of the ERC-1 are complete. That way we'd all get to demo some cables, and it wouldn't interfere with anyones impressions of the ERC-1. After everyone's done demo'ing the cables, we could Karma them off, as we're doing with the Emo.The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
So now the question becomes, where do we find some nice ICs for $40-$50?

I think the money is better used for things other than shipping... just because it would be hard to say what's "fair" for reimbursement. Much simpler to draw a name and say "here's your free _____!" -
WilliamM2-Go crap up another thread...Bluefox was just making a suggestion. You probably could have stated your thoughts in a slightly less assholeish manner.
I don't see how the first post would upset anyone. It seems you actually agree with it.
I would think that the biggest concern with this demo, would be whether the player sounds the same at the end, as it did at the beggining. It's going to be shipped 15 times or more, which means it will actually be in transit for 45 days or more over the course of the demo. Have you seen the damage FedEx/Ups can cause in just 1 shipment? Otherwise I probably would have signed up myself. -
dane_peterson wrote: »So now the question becomes, where do we find some nice ICs for $40-$50?

That must be why my checkbook never balances. The way posts were going I thought we would a few hundred dollars left over. Anyway, it was just the engineer in me trying to normalize the test, which, as was pointed out, is impossible in this situation.Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
Magico S5 MKII Mcast Rose speakers; SPOD spikes
Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables
Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits. -
comfortablycurt wrote: »That's a good point on the cables, but we're all still going to be using different components. Using cables that we're all already familiar with may give each of us a better impression of the improvements/differences that the ERC-1 is making. Adding cables that you're unfamiliar with, may alter your impressions of the CDP, since the cables could be altering your sound as well.
WilliamM2-Go crap up another thread...Bluefox was just making a suggestion. You probably could have stated your thoughts in a slightly less assholeish manner.:rolleyes:
As far as the surplus money is concerned, I'd agree with either using it for shipping costs, or for some cables. If we wanted to use it for cables, we could start sending the cables along in the same order, after the first few demo's of the ERC-1 are complete. That way we'd all get to demo some cables, and it wouldn't interfere with anyones impressions of the ERC-1. After everyone's done demo'ing the cables, we could Karma them off, as we're doing with the Emo.
Great idea's Curt, giving credit to Bluefox also. Would love to integrate some different cable's into my setup, why not? were on on a roll here: CDP, cable's. Im game for anything audio.:D
Pat.Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
Let's come up with another 1500 bucks and Karma off a pair of Tyler Acoustics Linbrook Super Towers...that's what I've been really itching to get my hands on lately.;)The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
Deposited all the checks I received today. As of RIGHT NOW, I have received $330 (including my $40 and Curt's $20 coming in the mail). I'm writing a check to Emotiva for $307.xx on Monday... but I'm still waiting to hear from lightman1 and cnh for payment.
I know cnh is on the road and difficult to get in touch with, and lightman1 was going to try to square up yesterday... so I'll wait till tomorrow at 10pm CST. At which point we'll close it up and I'll have a defined surplus of $. But it will be no more than about $60.00. -
comfortablycurt wrote: »Let's come up with another 1500 bucks and Karma off a pair of Tyler Acoustics Linbrook Super Towers...that's what I've been really itching to get my hands on lately.;)
x2
Or any Tyler speakers, for that matter! -
With about 60 bucks...we could pick up a pair of Signal Cable Analog II's. For a 1 meter pair, with the Club Polk discount, it would come out to around 60 bucks. There are several different AQ IC's that would fit that price range as well.The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
Hardly, even if the wire did make a difference, you can't ignore all the other variables. And if you really do believe it makes a difference, it would only make sense to use the wire you are used to, so you know that it's not the new wire changing the sound. As ridiculous as that whole concept is.
That is precisely why I like this demo. Many different pieces of gear, and many different ears;)Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Since there are a few suggestion about cable demo. Let's try this - if we have enough surplus or just short of 60-70, I think we can try Ben's IC.Trying out Different Audio Cables is a Religious Affair. You don't discuss it with anyone. :redface::biggrin:
-
Since there are a few suggestion about cable demo. Let's try this - if we have enough surplus or just short of 60-70, I think we can try Ben's IC.
+1
Best idea yet IMO. I've been wanting to try these for a while anyway.:)
Unless we scrape together the money for some Tyler's.;)The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
dane_peterson wrote: »Deposited all the checks I received today. As of RIGHT NOW, I have received $330 (including my $40 and Curt's $20 coming in the mail). I'm writing a check to Emotiva for $307.xx on Monday... but I'm still waiting to hear from lightman1 and cnh for payment.
I know cnh is on the road and difficult to get in touch with, and lightman1 was going to try to square up yesterday... so I'll wait till tomorrow at 10pm CST. At which point we'll close it up and I'll have a defined surplus of $. But it will be no more than about $60.00.
Good deal Dane. Think i speak for everyone, offering thank's for putting this whole thing together. Think we have a great gang of member's here willing to give their most honest, and unbiased thought's of this player. Looking forward to each participant's impression.:)
Pat.Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
Since there are a few suggestion about cable demo. Let's try this - if we have enough surplus or just short of 60-70, I think we can try Ben's IC.
Let me think how to do this. I would want one set between cdp and pre, and another between pre and amp.
BenPlease. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
Since there are a few suggestion about cable demo. Let's try this - if we have enough surplus or just short of 60-70, I think we can try Ben's IC.
+100, I'll kick in extra cash to make that happen.:)
Pat.Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
+100, I'll kick in extra cash to make that happen.:)
Pat.
Make someone else do it--you've already chipped in $40!
-
Let me think how to do this. I would want one set between cdp and pre, and another between pre and amp.
Ben
I don't want to be suggestive but you could loan us a pair for demo and sell us a pair at discounted price.
Trying out Different Audio Cables is a Religious Affair. You don't discuss it with anyone. :redface::biggrin: -
dane_peterson wrote: »Make someone else do it--you've already chipped in $40!

I am gettin carried away with this, ready to send out my wife for a Demo, LoL.
Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
I am gettin carried away with this, ready to send out my wife for a Demo, LoL.

Ah hell...why not? I'll chip in 20 bucks to demo your wife.:p:p;) How long of a demo are we talking about here? j/kThe nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
I'll talk to Dane.Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
Thanks
Ben -
comfortablycurt wrote: »Ah hell...why not? I'll chip in 20 bucks to demo your wife.:p:p;) How long of a demo are we talking about here? j/k
Im good for about 15 second's ( puff,puff,snore zzzzzzzzzzzzz):)Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
Im good for about 15 second's ( puff,puff,snore zzzzzzzzzzzzz):)
My bad, keep it clean. Back to audio.
Pat.Receiver: Pioneer Elite SC-05
Amp: Emotiva Xpa-3
Front L/R: POLK Rti-a9s':D
Center:POLK Csi-a6
Rear surround's:POLK Rti-a1s'
Sub: Klipsch Synergy sub-12
Sony Kdl-46w4100 46" LCD
PS3
Audioquest type 4 wiring. -
So who gets to do the sledgehammer/ tracking test?the winner?:D
Nice job of coordinating the demo Dane,I would have liked to be involved but the logistics and costs of shipping it here would be a pain.Testing
Testing
Testing




