LSiC question.

ost
ost Posts: 3
edited April 2003 in Troubleshooting
I *just* bought the polk LSiC. I had a question about how the speaker should sound. I noticed that only the right driver is producing sound. Is this normal, or do I have a 'bad' left driver?

Thanks in advance for any help. I thought I would ask people who may have the speaker first.

If any more details are needed please let me know.

Thanks again.
Post edited by ost on
· Share on FacebookShare on Twitter

Comments

  • phuz
    phuz Posts: 2,372
    edited April 2003
    Is the tweeter not even producing sound? The LSiC is a 2 and 1/2 way design. The driver on the left produces more of the lower frequencies, and the driver on the right is more for mid-range frequencies. Double check it with a full range source and see if you can hear the lower frequencies coming from the left driver.
    · Share on FacebookShare on Twitter
  • ost
    ost Posts: 3
    edited April 2003
    You are correct. After settling down and listening better I realized that there was sound coming out of the left driver, just not the 'same' sound.

    I also gave a call to the 1800 number where I was informed that this was due to the cascading design.

    All makes sense to me.

    Thanks!
    · Share on FacebookShare on Twitter
  • phuz
    phuz Posts: 2,372
    edited April 2003
    No problem. Congrats on the purchase of a superb center channel speaker, and welcome to the forums! :)
    · Share on FacebookShare on Twitter
  • ost
    ost Posts: 3
    edited April 2003
    · Share on FacebookShare on Twitter