Adcom 535L in Chicago CL $90

kawizx9r

I checked these out on audiogon and ebay and the average price is higher than what he's asking so thought I'd post this up.

No affil - http://chicago.craigslist.org/wcl/ele/1375736044.html

Might just grab it, even though I don't need it.

concealer404

Not trying to steal your thunder Freddy, but i decided not to pursue this amp and would pass it along since we're talking about 535s...

http://indianapolis.craigslist.org/ele/1373016004.html

GFA-535 for $50. I'm going up to pick up some 11TLs and possibly a GTP-500 from this guy this evening, so i can take a look at it for anyone.

kawizx9r

concealer404 wrote: »

Not trying to steal your thunder Freddy, but i decided not to pursue this amp and would pass it along since we're talking about 535s...

http://indianapolis.craigslist.org/ele/1373016004.html

GFA-535 for $50. I'm going up to pick up some 11TLs and possibly a GTP-500 from this guy this evening, so i can take a look at it for anyone.

Geez that's even better! Grab both for $140 (or maybe less for the one in my area) and you can bridge these babies up for some pretty sweet sound

Too bad I can't edit the title of this thread :rolleyes:

concealer404

Wait... these are bridgeable? You wouldn't happen to know the output when bridged, would you?

I'm trying to get some real power behind my speakers just as a cheap (hopefully) experiment to see if my 150wpc oinker is choking anything.

kawizx9r

Edit: Nevermind guess not, I'm probably thinking about the 555. My mistake, although these things support a 4ohm load.

Specifications

* Power output, watts/channel, continuous, 20 Hz - 20 kHz, <0.04%THD: 60 watts at 8 ohms 100 watts at 4 ohms
* Signal-to-noise ratio, A-weighted, 60 watts into 8 ohms: >110 dB
* Input impedance: 100,000 ohms
* Input sensitivity: 60 watts into 8 ohms: 0.97 V rms 1 watt into 8 ohms: 130 mV rms
* Damping factor (20 Hz - 20 kHz): >180
* Dynamic headroom into 4 ohms: 3.0 dB
* Chassis dimensions: 3" (76mm) x 17" (432mm) x 11 1/4" (286mm)
* Maximum dimensions: 3 3/8" (86mm) x 17" (432mm) x 12 1/2" (317mm)
* Shipping weight: 23 lbs. (10 1/2 kg)

concealer404

kawizx9r wrote: »

Iirc I thought you could, let me double check that though. Maybe someone can come in here and tell us what each amp puts out if bridged.

I wish my Oinker was bridgeable. I love the way it sounds, and i can pick another one up for peanuts.

concealer404

kawizx9r wrote: »

Edit: Nevermind guess not, I'm probably thinking about the 555. My mistake, although these things support a 4ohm load.

Specifications

* Power output, watts/channel, continuous, 20 Hz - 20 kHz, <0.04%THD: 60 watts at 8 ohms 100 watts at 4 ohms
* Signal-to-noise ratio, A-weighted, 60 watts into 8 ohms: >110 dB
* Input impedance: 100,000 ohms
* Input sensitivity: 60 watts into 8 ohms: 0.97 V rms 1 watt into 8 ohms: 130 mV rms
* Damping factor (20 Hz - 20 kHz): >180
* Dynamic headroom into 4 ohms: 3.0 dB
* Chassis dimensions: 3" (76mm) x 17" (432mm) x 11 1/4" (286mm)
* Maximum dimensions: 3 3/8" (86mm) x 17" (432mm) x 12 1/2" (317mm)
* Shipping weight: 23 lbs. (10 1/2 kg)

Hrmmm.... kindof glad i didn't pick it up then.... I never bothered to look up the specs when i had mine, but i wasn't really a fan. Always thought there might have been something wrong with it, but not worth it for me to try another one i guess. Bummer.