adding a power amp to receiver
Options
jake_angel
Posts: 9
how do i go about hooking up a separate power amp to my receiver that does have pre outs ?
my system is : receiver = Carver c-1000a
power amp = Carver M-1.5t
main speakers = RTI 150's
center = CSI 140
sub = PSB subsonic 5
the reason for adding the amp is the rti 150's need the power that the receiver cant dish out without getting very hot + shutting down
my system is : receiver = Carver c-1000a
power amp = Carver M-1.5t
main speakers = RTI 150's
center = CSI 140
sub = PSB subsonic 5
the reason for adding the amp is the rti 150's need the power that the receiver cant dish out without getting very hot + shutting down
Comments
-
1. Run a pair of interconnects from the main pre-outs (front L,R) to the 1.5.
2. Disconnect the main speakers from the 1000.
3. Connect the main speakers to the 1.5, done.
Cheers,
RussCheck your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service. -
i forgot to ask do i need a pre amp for the Carver M-1.5t ?
-
No, if the 1000 has pre-outs, it IS your preamp.
Cheers,
RussCheck your lips at the door woman. Shake your hips like battleships. Yeah, all the white girls trip when I sing at Sunday service. -
thanks russman i didn't think so thanks for your help .....
