SDA-1C on Pitt. CL
falcon377
Posts: 47
There is a pair of SDA-1C on Pittsburgh CL if anyone close by, maybe worth it.
They look real nice, seller says minty. Here is a link.
http://pittsburgh.craigslist.org/ele/1070504878.html
They look real nice, seller says minty. Here is a link.
http://pittsburgh.craigslist.org/ele/1070504878.html
Post edited by falcon377 on
Comments
-
600 is a little high,, but a nice snag if someone can get them for lessJC approves....he told me so. (F-1 nut)
-
There is a pair of SDA-1C on Pittsburgh CL if anyone close by, maybe worth it.
They look real nice, seller says minty. Here is a link.
http://pittsburgh.craigslist.org/ele/1070504878.html
Welcome aboard, falcon337. As george said, perhaps a little high but it does seem the 1C's, 2.3TL, and 1.2TL's have been creeping up lately. Probably worth it if minty, maybe one owner, and a local buyer. A little bit cheaper would be great and he would probably take less. CL advertised price usually leaves some bargaining power.Sony 60'' SXRD 1080p
Amp = Carver AV-705THX 5-Channel
Processor = NAD T747
Panasonic BD35 Blu-Ray
Main = SDA-1C Studio with RD0s, spikes, XO rebuild, rings, I/C upgrade
Center=Polk CS10, Surround = Athena Dipoles, Sub= Boston 12HO
Music/Video Streaming = Netgear NEO550
TT = Audio Technica -
Hi folks, I called the seller, and he said he needs to sell one of the items listed this weekend. He also has a Jolida JD-100 mint condition for $550.00 on CL. He said he needs $500.00 cash right away and will sell either the Polks or the Jolida for $500.00... But only by this weekend... Then he wont be so needy for cash.
Sounds like a good deal for someone who lives close enough to make the drive, He said he lives N.E. of Pittsburgh. I would love to get them myself but am low on cash..
Regards,
Falcon -
Yes, those are nice. Does anyone know how much they weigh?
-
$600 is too high. I'd say $350-$400 max
-
Yes, those are nice. Does anyone know how much they weigh?
The 1C's? About 85 pounds.The nirvana inducer-
APC H10 Power Conditioner
Marantz UD5005 universal player
Parasound Halo P5 preamp
Parasound HCA-1200II power amp
PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
Audioquest Speaker Cables and IC's -
there was a set on ebay that went for more than 500.00, and they were not as nice as these... and these are not as nice as mine!:D:pThe Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
nooshinjohn wrote: »there was a set on ebay that went for more than 500.00, and they were not as nice as these... and these are not as nice as mine!:D:p
Your 1c's suck -
:pand you blow....:pThe Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
The price is the price...$500 local is a good deal for 1Cs that don't need rehab. What you have to pay for something else with comensurate(sp?) performance.
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
george daniel wrote: »600 is a little high,, but a nice snag if someone can get them for less
The pair I recently bought were advertised for $675./obo...I gave him $400. -
I paid $400 for mine (original owner, black studio) 18 months ago and drove 700 miles round trip to get them. I still say $500 is a good deal assuming they are really as nice as the pictures would indicate. There is absolutely nothing close value-wise at your local retailer that will sound as good as these do. I have no doubt a $350 - $400 pair will pop up eventually but if you have to drive a couple hundred miles, replace a driver or two, repair some grill cloth or fix some wood damage you're back to $500+.Sony 60'' SXRD 1080p
Amp = Carver AV-705THX 5-Channel
Processor = NAD T747
Panasonic BD35 Blu-Ray
Main = SDA-1C Studio with RD0s, spikes, XO rebuild, rings, I/C upgrade
Center=Polk CS10, Surround = Athena Dipoles, Sub= Boston 12HO
Music/Video Streaming = Netgear NEO550
TT = Audio Technica -
^^ what he said ^^ except I drove 2200 miles round trip.Speakers: SDA-1C (most all the goodies)
Preamp: Joule Electra LA-150 MKII SE
Amp: Wright WPA 50-50 EAT KT88s
Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
Cables: Mits S3 IC and Spk cables| PS Audio PCs -
Wow I thought 1000 round trip for my SDA-SRS 2"s was far''
- SDA SRS 2
- SDA 1A
- Monitor 11
- Monitor 7B
- CS350lsi
- RM-6600
- FX500i
-
and worth every bit of the 2200 miles. Never see SDAs come up for sale around Dallas.
I blame Ron Temple for getting me started down this path;)Speakers: SDA-1C (most all the goodies)
Preamp: Joule Electra LA-150 MKII SE
Amp: Wright WPA 50-50 EAT KT88s
Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
Cables: Mits S3 IC and Spk cables| PS Audio PCs -
There ought to be some kind of Award!! for the most miles driven!!
- SDA SRS 2
- SDA 1A
- Monitor 11
- Monitor 7B
- CS350lsi
- RM-6600
- FX500i
-
I didn't know how lucky I was when I bought my first pair of polks SDA 1A for $200 and had to drive 10 miles to pick them up,But that's when this sicknees Began!!
- SDA SRS 2
- SDA 1A
- Monitor 11
- Monitor 7B
- CS350lsi
- RM-6600
- FX500i
-
Hello to all,
My name is Mike and I am the guy selling the SDA-1C on Pittsburgh's cl,
I was directed here from a phone call I received from one of your members.
As for the price, I think it is very fair, However as I am in sudden need of cash I will let them go for a little less. I am the original owner, they are very near mint, and if you don't mind a little stain, or maybe dirt on the grill cloth, then they are mint, original, never molested.. Up until I moved into this smaller house I had the original box's, But I figured whats the use in them taking up space since I will never sell them anyway.., Well, Now I am forced to sale some of my collection..
After reading through some of this forum, I may just keep them and do the upgrades just to see how they sound. I have other things I can sale to raise the needed cash.
Anyhow these are in perfect condition, as far as the drivers and cabinets go, they do not even have marks on the bottom oak from being hit with a vacuum cleaner, the side cloth has no snags, there are no watermarks or anything. That is what I describe as mint..
Anyhow after hearing of this forum I thought I would just jump in to introduce myself, and voice my opinion.
Thank you all for having me here, I love the forum and only wish I knew of it sooner.
Kindest Regards,
Mike -
Welcome to CP hifiaudioSpeakers: SDA-1C (most all the goodies)
Preamp: Joule Electra LA-150 MKII SE
Amp: Wright WPA 50-50 EAT KT88s
Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
Cables: Mits S3 IC and Spk cables| PS Audio PCs -
and worth every bit of the 2200 miles. Never see SDAs come up for sale around Dallas.
I blame Ron Temple for getting me started down this path;)
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Price was right for those but I am more than happy with the 1CsSpeakers: SDA-1C (most all the goodies)
Preamp: Joule Electra LA-150 MKII SE
Amp: Wright WPA 50-50 EAT KT88s
Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
Cables: Mits S3 IC and Spk cables| PS Audio PCs -
Price was right for those but I am more than happy with the 1Cs
Combo rig:
Onkyo NR1007 pre-pro, Carver TFM 45(fronts), Carver TFM 35 (surrounds)
SDA 1C, CS400i, SDA 2B
PB13Ultra RO
BW Silvers
Oppo BDP-83SE -
Welcome Mike. Those 1C's do look in very good condition. That model is considered one of the best SDA's. Probably the best for a mid sized room. If you can keep them, you could update the xovers and try the new silk tweeters. Big step change._________________________________________________
***\\\\\........................... My Audio Journey ............................./////***
2008 & 2010 Football Pool WINNER
SOPAThank God for different opinions. Imagine the world if we all wanted the same woman -
Thanks for the welcome Ricardo, I have a Jolida cd player listed for sale also, and if I sale the jolida first I will keep the Polks and do the upgrade. I figured I would list a couple things and when one sales and I get the cash I need, I will then keep the other one. I have a couple people interested in both items, but I hope to sale the Jolida first.
The upgraded tweeters seem like a worthwhile investment, and then I will do the xovers as budget allows. -
$600 is too high. I'd say $350-$400 max
The price is only to high if you can't afford it.. There has not been a pair of these for sale in the Pitt area for a long, long time. And mine are worth every penny of $600.00.. If someone is in the market for these, and nearby they can inspect them and see for their selves just how nice these are.
With the exception of the grill cloth there is not a mark on them... All original, never modded, and includes a couple extra drivers, 1, sl2000.
and 1 mw6510.
So it is worth it for someone who wants to own a pair of minty original legendary speakers.
Regards,
Mike -
We see so many CL and Fleabay listings on here which is great. It is however especially nice when a seller joins the Forum as a result of the process. You get a little more info on the speakers (or whatever) plus you get a new member. Nice. Welcome aboard Mike.Sony 60'' SXRD 1080p
Amp = Carver AV-705THX 5-Channel
Processor = NAD T747
Panasonic BD35 Blu-Ray
Main = SDA-1C Studio with RD0s, spikes, XO rebuild, rings, I/C upgrade
Center=Polk CS10, Surround = Athena Dipoles, Sub= Boston 12HO
Music/Video Streaming = Netgear NEO550
TT = Audio Technica -
Yes, those are nice. Does anyone know how much they weigh?
The manual states the studio version weighs 85lbs & the standard weighs 100lbs. -
Welcome to the forum,, hope your Jolida is the first to go,, keep those 1C's,,eventually feed em' some tube power, and you'll be glad you did. Good luck and welcome aboard.JC approves....he told me so. (F-1 nut)
-
Thanks Marty, and George I am honored to be here. I have been browsing around the site for several hours today, There is a lot of knowledge here, also some crazy people to..
I am probably somewhere in the middle of the two groups..
I have someone coming over to look at the Jolida CD player I have advertised, so if it sell's I will be keeping the Polk's. I will probably due the upgraded RDO tweeters first.
I hope they will sound as good as some of the folks on here say they will, It will be like getting a new pair of SDA's.. I love getting new thing's.
Kindest Regards
Mike -
The 194s age like wine. I have about 500 hours on mine and they have improved dramatically.Speakers: SDA-1C (most all the goodies)
Preamp: Joule Electra LA-150 MKII SE
Amp: Wright WPA 50-50 EAT KT88s
Analog: Marantz TT-15S1 MBS Glider SL| Wright WPP100C Amperex BB 6er5 and 7316 & WPM-100 SUT
Digital: Mac mini 2.3GHz dual-core i5 8g RAM 1.5 TB HDD Music Server Amarra (memory play) - USB - W4S DAC 2
Cables: Mits S3 IC and Spk cables| PS Audio PCs