Glut of boxed Polk replacement drivers

124678

Comments

  • dschwandt
    dschwandt Posts: 5
    edited March 2009
    Hello,

    Do you still have one MW 7006 available? Please email me: dcschwandt@satnow.net.

    Thank you.

    DES
    · Share on FacebookShare on Twitter
  • ludwigvan66
    ludwigvan66 Posts: 1
    edited March 2009
    Anyone still have one?

    Please respond to (remove the *s)

    ludwi*gva*n66@Yahoo.com
    · Share on FacebookShare on Twitter
  • aleperezb
    aleperezb Posts: 3
    edited April 2009
    Im interested in 1 MW8002 if you still got it.

    please contact me directly at alejandroperez99@hotmail.com
    · Share on FacebookShare on Twitter
  • sawmkw
    sawmkw Posts: 6
    edited April 2009
    Posting to this thread is a waste of time. He is not responding.
    · Share on FacebookShare on Twitter
  • mmadden28
    mmadden28 Posts: 4,283
    edited April 2009
    Try sending a PM (when you have enough posts).
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
    · Share on FacebookShare on Twitter
  • jimsvm
    jimsvm Posts: 307
    edited April 2009
    hi. looking for mw-8002 (1 only) RT10 E-mail jicapataha@live.ca . thanks, hope to here from you soom.
    Rec rm vm30 micro pro 3000 akai 2 channel. ht anthem MTX 5 channel anthem P2 statement anthem 325, 8 channel Martin Logan power amp for 4 ceiling ls900 2 and outdoor polks, 2 JL 110’s subs panasonic 65" plasma lsim 705’s , 706c, L200 and Control 4 garage rig monitor 10s crossovers by VR3, dynamat, RDO-194's, new drivers. psw 111 Pioneer 9040 BDP53fd 100 " screen Nakamichi HD projector, and Panasonic 65” plasma.
    · Share on FacebookShare on Twitter
  • No3pencil
    No3pencil Posts: 19
    edited April 2009
    mmm mw4801 and a single sl5501
    Sys Show

    Cisum
    · Share on FacebookShare on Twitter
  • Oggfarm
    Oggfarm Posts: 2
    edited May 2009
    Do you still have the MW1480 if so I would be intrested in one or more if you have them.
    Gerry
    · Share on FacebookShare on Twitter
  • Oggfarm
    Oggfarm Posts: 2
    edited May 2009
    My email is Oggfarm@cox.net
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited May 2009
    I need some of your MW 8002 drivers and some of the SL 5501 tweeters. Please e-mail me: dwhalverson@rap.midco.net

    Dave
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited May 2009
    Anyone have any luck in contacting this individual?
    · Share on FacebookShare on Twitter
  • mmadden28
    mmadden28 Posts: 4,283
    edited May 2009
    I'll try to send him an email and let him know to check the forum. According to his profile he hasn't been online since late March.

    -Madden
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited May 2009
    I sent an e-mail too and got zero response.

    mmadden28 wrote: »
    I'll try to send him an email and let him know to check the forum. According to his profile he hasn't been online since late March.

    -Madden
    · Share on FacebookShare on Twitter
  • Big Dawg
    Big Dawg Posts: 2,005
    edited June 2009
    Nevermind.....
    · Share on FacebookShare on Twitter
  • nguyendot
    nguyendot Posts: 3,594
    edited June 2009
    I am interested in two of the mw7009 drivers. Please email me at tuananh_nguyen@dell.com (yes, i know).

    thanks
    Main Surround -
    Epson 8350 Projector/ Elite Screens 120" / Pioneer Elite SC-35 / Sunfire Signature / Focal Chorus 716s / Focal Chorus CC / Polk MC80 / Polk PSW150 sub

    Bedroom - Sharp Aquos 70" 650 / Pioneer SC-1222k / Polk RT-55 / Polk CS-250

    Den - Rotel RSP-1068 / Threshold CAS-2 / Boston VR-M60 / BDP-05FD
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited June 2009
    I'm just going to part out my RT10's:(. No drivers, but I have 4 tweeters. 2 of them are new. Please e-mail for more info and prices.

    Dave
    DWHalverson wrote: »
    Numerous e-mails and still no response:(:(. Man the internet is wonderfull. Nobody has a phone any more. Even if I get any response from this guy I wonder how any transaction would be?? Needless to say I would be nervous. Just sucks because I can't find the replacement drivers I need. Might have to bone these RT10's out:mad:.

    I would like some communication with this individual.
    dwhalverson@rap.midco.net
    605-484-6822 Cell
    605-791-2291 Home

    Call or e-mail if you still have the MW8002 drivers or something that would work.

    Dave Halverson
    · Share on FacebookShare on Twitter
  • mmadden28
    mmadden28 Posts: 4,283
    edited June 2009
    DWHalverson wrote: »
    Numerous e-mails and still no response:(:(. Man the internet is wonderfull. Nobody has a phone any more. Even if I get any response from this guy I wonder how any transaction would be?? Needless to say I would be nervous. Just sucks because I can't find the replacement drivers I need. Might have to bone these RT10's out:mad:.

    I would like some communication with this individual.
    dwhalverson@rap.midco.net
    605-484-6822 Cell
    605-791-2291 Home

    Call or e-mail if you still have the MW8002 drivers or something that would work.

    Dave Halverson

    Who crapped in your wheaties today?
    As you can see from his feedback he hasn't had any issues with his sales to be concern about. Also I have dealt with him and picked my items up at his home. He's good people. Perhaps he just has better things to do.


    Have you tried calling Polk to see if they have the drivers you require?

    By the way, posting your email addy and phone numbers in a public, google indexed forum was not a oood idea. If you have any concern you should request that a moderator remove those items from your post.

    I'm curious how did you send him any emails if you don't know his email address?
    I don't understand the comment about no phone--This isn't craigslist.

    Lastly, you did two other things wrong-which is frowned upon by the forum members.
    1.) You posted your own sale in another's FS thread.
    2.) You apparently sidestepped the Forum rules about the minimum # of posts before being able to post a sale.
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
    · Share on FacebookShare on Twitter
  • mmadden28
    mmadden28 Posts: 4,283
    edited June 2009
    Just in case you missed them, and truly did not intend any malcontent, here are the forum rules on the Flea Market to get you up to speed:
    https://www.polkaudio.com/forums/showthread.php?t=37769
    http://www.polkaudio.com/forums/announcement.php?f=34
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited June 2009
    I'm sure we can all get along;). I figured this would cause an issue and for that I do appolagise. As far as his e-mail, he posted it on one of the many pages of people trying to buy his stuff. As far as me listing my info, it isn't a big deal to me. I put the info out there for him, thinking it might be easier for him to email or call me personally--guess not. I have contacted Polk for a few years, infact again today, and the drivers will never be made again. I have been on thier waiting list over the years and still no drivers for me:(.

    I understand your concern about posting in his thread and for that I will delete it or get it deleted. Just sucks that I can't list them myself until I have 25 posts:(. Today was bad day for me and I just went overboard on this post, so I hope you don't have a day like I did over this:rolleyes:.

    If you know the guy why wouldnt you have him check his post or at least have you relpy for him?

    Dave
    mmadden28 wrote: »
    Just in case you missed them, and truly did not intend any malcontent, here are the forum rules on the Flea Market to get you up to speed:
    https://www.polkaudio.com/forums/showthread.php?t=37769
    http://www.polkaudio.com/forums/announcement.php?f=34
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited June 2009
    I contacted a moderator to pull my post. Now my post count goes up and it keeps his thread TTT:D.

    Dave
    · Share on FacebookShare on Twitter
  • mmadden28
    mmadden28 Posts: 4,283
    edited June 2009
    DWHalverson wrote: »
    ...

    If you know the guy why wouldnt you have him check his post or at least have you relpy for him?

    Dave

    As a coutesy, I did send him an email (not sure if its the same email addy you found), but I have had technical issues with sending him emails in the past-it seems they get lost in never never land. The only emails that actually got through were via a Craigslist email addy oddly enough- of course they only last as long as the ad thats posted so I can use that anymore.I just attributed it to the fact that I have my own email server running at my house and Verizon grey listed all their home IPs.

    As far as babysitting his FS posts, well frankly that's not my job, but we'll just leave that there. ;)

    Keep in mind, its not that he's not responding to your posts, he hasn't logged into this site since March 25th, so until he logs in , he's not going to know he has inquiries. Sorry.

    But, anyway Welcome to Club Polk, and cheer up :cool: Get your mad on at Polk instead for not making any more of the drivers you need.
    ____________________
    This post is a natural product. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects.

    HT:Onkyo 805, Emotiva XPA-5, Mitsu 52" 1080p DLP / polkaudio RTi12, CSIa6, FXi3, uPro4K
    2-chnl : Pio DV-46AV (SACD), Dodd ELP, Emotiva XPA-1s, XPA-2, Odyssey Khartago, LSi9, SDA-SRS 2 :cool:, SB Duet, MSB & Monarchy DACs, Yamaha PX3 TT, SAE Tuner...
    Pool: Atrium 60's/45's
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,577
    edited June 2009
    Why would you get mad at Polk? They have supported long discontinued speakers for a very long time, and wait, still do. Not every loudspeaker is a winner.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited June 2009
    I am not mad at anybody and surely not Polk. I have used tons of their product over then years and will continue to do so. There has been some changes within Polk and unfortunately the MW8002 drivers were part of the change.
    dorokusai wrote: »
    Why would you get mad at Polk? They have supported long discontinued speakers for a very long time, and wait, still do. Not every loudspeaker is a winner.
    · Share on FacebookShare on Twitter
  • scootchu
    scootchu Posts: 100
    edited June 2009
    Hey folks. I apologize again for being MIA. I have had a lot of things going on and neglected to check in.
    In any case I have more drivers coming and will get the part numbers posted for all those that are still interested.
    my email is nonlineditor at comcast dot com.
    Again sorry about being away.
    Scott
    · Share on FacebookShare on Twitter
  • scootchu
    scootchu Posts: 100
    edited June 2009
    mmadden28 wrote: »
    Who crapped in your wheaties today?
    As you can see from his feedback he hasn't had any issues with his sales to be concern about. Also I have dealt with him and picked my items up at his home. He's good people. Perhaps he just has better things to do.


    Have you tried calling Polk to see if they have the drivers you require?

    By the way, posting your email addy and phone numbers in a public, google indexed forum was not a oood idea. If you have any concern you should request that a moderator remove those items from your post.

    I'm curious how did you send him any emails if you don't know his email address?
    I don't understand the comment about no phone--This isn't craigslist.

    Lastly, you did two other things wrong-which is frowned upon by the forum members.
    1.) You posted your own sale in another's FS thread.
    2.) You apparently sidestepped the Forum rules about the minimum # of posts before being able to post a sale.

    Guys
    I feel the need to explain exactly why I haven't been around just so you can understand.

    My mother passed away the day after Christmas, I lost my job the first week of January and at the same time started my own business, which took a few months to get up and running, Oh and a stomach ulcer. Let's see three kids, mother's estate, lot's of things to do... well you get the point.
    For only the past couple of months I have been able to breath.
    Again I am sorry, but Polk speakers have been last on the list of things and I hope that I didn't cause anyone to get into heated discussions.
    · Share on FacebookShare on Twitter
  • NotaSuv
    NotaSuv Posts: 3,866
    edited June 2009
    scootchu wrote: »
    Guys
    I feel the need to explain exactly why I haven't been around just so you can understand.

    My mother passed away the day after Christmas, I lost my job the first week of January and at the same time started my own business, which took a few months to get up and running, Oh and a stomach ulcer. Let's see three kids, mother's estate, lot's of things to do... well you get the point.
    For only the past couple of months I have been able to breath.
    Again I am sorry, but Polk speakers have been last on the list of things and I hope that I didn't cause anyone to get into heated discussions.

    sorry to hear of your rocky last 6 months......hoping you see a much brighter next few months........thoughts and best wishes sent your way......
    · Share on FacebookShare on Twitter
  • scootchu
    scootchu Posts: 100
    edited June 2009
    NotaSuv wrote: »
    sorry to hear of your rocky last 6 months......hoping you see a much brighter next few months........thoughts and best wishes sent your way......

    Thanks, not making excuses, just explaining. :)
    The bright spot is having my own business. Doing pretty much what I did and making more than I was. I really cannot complain about that. It's just so very hard to find that 6 months have passed so quickly. It was a perfect storm of crisis. Thanks again for the thoughts. :)
    · Share on FacebookShare on Twitter
  • DWHalverson
    DWHalverson Posts: 12
    edited June 2009
    Sorry to hear about all the issues you have been going through. It can be a lot to deal with at times. Just remember, it all happens for a reason.

    Do you still have any MW 8002 drivers for the RT10's

    Dave
    · Share on FacebookShare on Twitter
  • ctdram
    ctdram Posts: 2
    edited June 2009
    scootchu,

    I am interested in a good MW8002 driver if you have one. I tried emailing you but it came back as undeliverable. Please let me know when you have a chance. Thanks.

    njmaier AT gmail DOT com
    · Share on FacebookShare on Twitter
  • agoraphone
    agoraphone Posts: 2
    edited August 2009
    Hi, I'm interested in the MW5800 driver. Please let me know if you still have it.

    my email: agora[at]agoraphonics dot com

    Thanks!
    · Share on FacebookShare on Twitter