B&K vs Sherbourn

cokewithvanilla
cokewithvanilla Posts: 1,777
edited December 2007 in Electronics
Specificly the B&K Reference 7270 mkII vs. Sherbourn 7/2100A, both 7 x 200 at 8 ohms. Im running a 7.1 LSi system. They are both around the same price, but inoticed that the B&K is THX ultra certified. Of course, being stupid, this label means something to me :). Anyone have experience with these products, or heard anything about them?
Post edited by cokewithvanilla on
· Share on FacebookShare on Twitter

Comments

  • mantis
    mantis Posts: 17,280
    edited December 2007
    I'll go to say I have heard, Installed and had more success with B&K over Sherbourn. I honestly don't care for there products. Not my cup of tea. But they do make nice quality products.

    You can't go wrong with either but if you ask me B7K all the way, not to mention B&K preamps are awesome. I would own them again and probably will.

    Dan
    Dan
    My personal quest is to save to world of bad audio, one thread at a time.
    · Share on FacebookShare on Twitter
  • cokewithvanilla
    cokewithvanilla Posts: 1,777
    edited December 2007
    Thanks for the reply. I just pulled the trigger on the B&K. I hope it sounds good.
    · Share on FacebookShare on Twitter
  • woofiepaws
    woofiepaws Posts: 222
    edited December 2007
    It will sound good. Before the SDAs I had a full LSi setup running off the B&K. The amp will definitely drive the speakers. No worries on loud action scenes and a nice balanced sound for music
    · Share on FacebookShare on Twitter
  • MADGSF
    MADGSF Posts: 603
    edited December 2007
    Too late but you made the right decision. I have nothing but praise for my B&K 7250ii. More power than I need, smooth and quiet.
    AVR: Elite VSX-21TXH
    Amplifier: B&K 7250 Series ii
    Misc: Velodyne SMS-1
    Mains: RTi-10
    Center: CSi-5
    Rear: Boston DSi460
    Sub: SVS PC-Ultra
    TV: Panasonic TC-P58V10
    DVD: Panasonic DMP-BD60K
    · Share on FacebookShare on Twitter
  • cokewithvanilla
    cokewithvanilla Posts: 1,777
    edited December 2007
    Does anyone know what the 7270's go for these days? Starting to think I got ripped.
    · Share on FacebookShare on Twitter
  • AndyGwis
    AndyGwis Posts: 3,655
    edited December 2007
    There's one for $1400 on Agon. That the one you got?

    I would think that's a pretty fair price, especially if it's in 9/10 Agon condition.
    Stereo Rig: Hales Revelation 3, Musical Fidelity CD-Pre 24, Forte Model 3 amp, Lexicon RT-10 SACD, MMF-5 w/speedbox, Forte Model 2 Phono Pre, Cardas Crosslink, APC H15, URC MX-950, Lovan Stand
    Bedroom: Samsung HPR-4252, Toshiba HD-A2, HK 3480, Signal Cable, AQ speaker cable, Totem Dreamcatchers, SVS PB10-NSD, URC MX-850
    · Share on FacebookShare on Twitter
  • cokewithvanilla
    cokewithvanilla Posts: 1,777
    edited December 2007
    you guessed it.

    only reason i asked was one went on ebay for 860 the night after i bought it

    im like !!!!!!

    but I received my amp and it certainly is in 9/10 condition.... you could say 10/10... there is absolutely nothing wrong with it. Also, the seller is an amazing guy, so I got over my initial shock of seeing one go for 540 less.

    But thanks for the reply :)
    · Share on FacebookShare on Twitter
  • AndyGwis
    AndyGwis Posts: 3,655
    edited December 2007
    Ebay is a crap shoot. One might go for $900, then next day for $1500. Also, there's really no way to ensure the ebay one is in stated condition. I've been fooled before on their, but Agon sellers are usually on the up and up. Never been burned by anything from Agon.
    Stereo Rig: Hales Revelation 3, Musical Fidelity CD-Pre 24, Forte Model 3 amp, Lexicon RT-10 SACD, MMF-5 w/speedbox, Forte Model 2 Phono Pre, Cardas Crosslink, APC H15, URC MX-950, Lovan Stand
    Bedroom: Samsung HPR-4252, Toshiba HD-A2, HK 3480, Signal Cable, AQ speaker cable, Totem Dreamcatchers, SVS PB10-NSD, URC MX-850
    · Share on FacebookShare on Twitter