lsi9 speaker stands

snakebitten
snakebitten Posts: 94
edited September 2005 in Speakers
Would atlantis pro speaker stands be a good match with lsi9? I tried to find what the weight limit was on these but could not find anything out. I found a good price but wanted to make sure they would work with the 9's.

Any input would be appreciated.
Post edited by snakebitten on
· Share on FacebookShare on Twitter

Comments

  • cmy330go
    cmy330go Posts: 2,341
    edited September 2005
    Those should work just fine. I have my 9's on a much lighter weight stand than that (Sanus EF28) and they are doing fine.

    Can I ask where you found the good price? Cheapest I found them is $99 at Audio Advisor. Have you found better?
    HT
    Mits WD-65737, DirecTV, Oppo DV-970HD, XBOX ONE, Yamaha RX-A1030, Parasound Halo A23, Rotel RB-985, Music Hall MMF-7, Parasound PPH-100, LSi-15, LSi-C, LSi-FX, LSi-7, PSW-1000, Monster HTS2600

    2 CH
    Parasound Halo P3, Parasound Halo A21, Sutherland Ph.D, VPI Classic 3 w/ 3D arm & Soundsmith Aida Cartridge, Arcam CD72T, B&W 802 S3, Monster HTS2500,
    · Share on FacebookShare on Twitter
  • snakebitten
    snakebitten Posts: 94
    edited September 2005
    Thanks for the reply. Those are the ones I am looking at (audio advisor). I've been looking around alot and those looked good at a decent price.
    · Share on FacebookShare on Twitter
  • snakebitten
    snakebitten Posts: 94
    edited September 2005
    cmy330go- do you use stands for your lsi7's?
    · Share on FacebookShare on Twitter
  • cmy330go
    cmy330go Posts: 2,341
    edited September 2005
    snakebitten wrote:
    cmy330go- do you use stands for your lsi7's?

    No. I have some odd speaker mounts that I slightly modified, and wall mounted them on their sides.
    lsi7_side.jpg
    lsi7_front.jpg
    HT
    Mits WD-65737, DirecTV, Oppo DV-970HD, XBOX ONE, Yamaha RX-A1030, Parasound Halo A23, Rotel RB-985, Music Hall MMF-7, Parasound PPH-100, LSi-15, LSi-C, LSi-FX, LSi-7, PSW-1000, Monster HTS2600

    2 CH
    Parasound Halo P3, Parasound Halo A21, Sutherland Ph.D, VPI Classic 3 w/ 3D arm & Soundsmith Aida Cartridge, Arcam CD72T, B&W 802 S3, Monster HTS2500,
    · Share on FacebookShare on Twitter
  • snakebitten
    snakebitten Posts: 94
    edited September 2005
    nice
    · Share on FacebookShare on Twitter
  • Whadyasay
    Whadyasay Posts: 300
    edited September 2005
    I have a set of Target HR70's, which I love. They are stout steel with welded bases and platforms, and I filled them with sand. They are like two pillars of stone now, and the plat6form is nice and big to give good llateral support for the LSi9's. Here are some pics from an earlier thread on the subject:

    http://www.polkaudio.com/forums/attachment.php?attachmentid=6596

    http://www.polkaudio.com/forums/attachment.php?attachmentid=6599
    Polk LSi9 Mains, Polk LSIC Center, Polk RT25i Surrounds, Polk M3II Rear Surround, SVS PB10-ISD Sub, Denon AVR 2809 (as digital pre/pro only), Sony BDP-S350, Oppo DV-981HD, Cambridge Audio Azur 540C (CD), Marantz MM9000 5-ch amp, Outlaw ICBM, Panasonic th-42PX85u HDTV, Behringer BFD Pro, Monster Power HTS 2600 Conditioner
    · Share on FacebookShare on Twitter