Anyone here have an SVS pb10isd? Looking for feedback.
aaharvel
Posts: 4,489
I'm not upgrading anytime soon- as my Velodyne does very well in my 1,100 sqft condo, especially with music. but am considering something more powerful if I decide to move back to Asheville (Greensboro, NC blows chunks guys. That's free advice.) $400 seems reasonable. I would never invest more in a subwoofer.
Any feedback would be nice thanks. :cool:
Any feedback would be nice thanks. :cool:
H/K Signature 2.1+235
Jungson MagicBoat II
Revel Performa M-20
Velodyne cht-10 sub
Rega P1 Turntable
"People working at Polk Audio must sit around the office and just laugh their balls off reading many of these comments." -Lush
Jungson MagicBoat II
Revel Performa M-20
Velodyne cht-10 sub
Rega P1 Turntable
"People working at Polk Audio must sit around the office and just laugh their balls off reading many of these comments." -Lush
Post edited by RyanC_Masimo on
Comments
-
I just finished potting together a kit for a VMPS sub. It was $409 delivered and went together very easily. First impressions (before break in) is that it is a very powerful, musical sub. I had to go to Home Depot and get a bunch of little rubber feet to put behind the pictures on the wall, as they are rattling and walking themselves crooked. Pretty good bang for the buck.So what if those speakers are as big as a Subaru and cost twice as much? You'll never have to trade these babies in and when you die, they can bury you in them.
And, if you can't afford them, F***ing FINANCE them! -
andrew,
I found this review on the web:
Click here for the direct link review (zip pdf file)
http://www.soundenvironments.org/filemgmt/visit.php?lid=5
Other reviews, etc.. the link above is actually the last one on this page.
http://www.soundenvironments.org/filemgmt/index.php
Hope this helpsReceiver: harmankardon AVR235
Mains: polk R30
Center: polk CSi3
Rear Surrounds: polk R20
Subwoofer: polk PSW404
DVD: Panasonic DVD-S29 -
aaharvel wrote:great. SVSpb10ISD anyone?Denon #2900, Denon stereo receiver, Conrad Johnson Sonographe 120 amp, Blue Jeans cables, and Klipsch RF-7's
-
no internal bracing?
nevermind then. I'll keep my $200 'wondersub'. Thanks for the feedback though! -
aaharvel wrote:if I decide to move back to Asheville (Greensboro, NC blows chunks guys. That's free advice.)
Yeah, but...you'll be farther from Foreign Cars Italia!!!George Grand wrote: »
PS3, Yamaha CDR-HD1300, Plex, Amazon Fire TV Gen 2
Pioneer Elite VSX-52, Parasound HCA-1000A
Klipsch RF-82ii, RC-62ii, RS-42ii, RW-10d
Epson 8700UB
In Storage
[Home Audio]
Rotel RCD-02, Yamaha KX-W900U, Sony ST-S500ES, Denon DP-7F
Pro-Ject Phono Box MKII, Parasound P/HP-850, ASL Wave 20 monoblocks
Klipsch RF-35, RB-51ii
[Car Audio]
Pioneer Premier DEH-P860MP, Memphis 16-MCA3004, Boston Acoustic RC520 -
that's a risk i'm willing to take.
btw- the 2006 Z06 is awesome. And I hate American cars.
http://www.edmunds.com/apps/vdpcontainers/do/vdp/articleId=107094/pageNumber=1 -
here is a review written by Club Polk's own Dr. Spec, although he's been a stranger lately.
Dr. Spec's reviewSony KDL-40V2500 HDTV, Rotel RSX-1067 Receiver, Sony BDP-S550 Blu-ray, Slim Devices Squeezebox, Polk RTi6, CSi3 & R15, DIY sub with Atlas 15 -
aaharvel wrote:great. SVSpb10ISD anyone?
I've got one; couldn't be happier....you could say my room is 20 x 20 because it's open on one side, and this thing ROCKS....on bassy action scenes the walls shake....I recommend it!!!!_________________________________________________
***\\\\\........................... My Audio Journey ............................./////***
2008 & 2010 Football Pool WINNER
SOPAThank God for different opinions. Imagine the world if we all wanted the same woman -
Take it a step up...
PB10ISD has next to no features... No bracing in a long, 3/4" MDF enclosure.
Its main goals are entry level HT, hit the possible lowest note while smashing everything in the house.
The PB12 ISD and PCI series would be the way to go for music. IMO I purchased my PCi 25-31 for 580 shipped to my door...- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit. -
clifselina wrote:I just finished potting together a kit for a VMPS sub. It was $409 delivered and went together very easily. First impressions (before break in) is that it is a very powerful, musical sub. I had to go to Home Depot and get a bunch of little rubber feet to put behind the pictures on the wall, as they are rattling and walking themselves crooked. Pretty good bang for the buck.
I also put together a VMPS sub ("Larger sub") and I like it very much. It should be noted, though, that the VMPS subs are passive, which means you might have to spring for a separate amp, depending on your current amplification setup. On the plus side, the VMPS subs are very efficient - mine shakes the walls even when run by a 30WPC power amp. -
tenor12 wrote:I also put together a VMPS sub ("Larger sub") and I like it very much. It should be noted, though, that the VMPS subs are passive, which means you might have to spring for a separate amp, depending on your current amplification setup. On the plus side, the VMPS subs are very efficient - mine shakes the walls even when run by a 30WPC power amp.
I mounted a 250W sub amp I got from Parts Express in the back of the enclosure. That was to free up power from my amp to my main speakers, which are some Infinity Kappa 6 speakers. (My Polks are in another room)
The Kappa speakers are inefficient, but since I have the crossover set at 100 Hz, more current from the amp is not wasted trying to drive inefficient woofers and I have more headroom now.
I first heard the VMPS subs at a friend's house and was blown away by the power and efficiency (he had them run passively).
I have to say it sure was very gratifying to have my wife run out of the bedroom and open the front door to check for clouds after she heard and felt the thunder from a movie.
So what if those speakers are as big as a Subaru and cost twice as much? You'll never have to trade these babies in and when you die, they can bury you in them.
And, if you can't afford them, F***ing FINANCE them! -
I have both the PB10 and the 20-39 PC+ subs from SVS. I run the 20-39 as the main sub, and the PB10 as the second rear sub. My room is about 18'x20', and is the living room of an apt. Running both subs real low, I get incredibly detailed bass, that fills the room, without shaking all the neighbors. The PB10 is pretty impressive at its price point. Very clean, detailed bass. Not a lot of features, not a lot to play with, however it lives up to the SQ the SVS is known for. If you don't mind DIY, I would definetely recommend the Parts Express or other kits in the same price range. I have heard some of them, and they are very good. For delivered to your door, plug it in and scare the cat type convenience, hard to beat the PB10. I don't run very high SPL, so I can't comment on the lack of internal bracing. I would ask, is it really something "I" can hear, or has the reviewer made me believe it is an issue "I" might possibly hear, or convince myself I can hear? That's why I don't read too many paid advertisements, I mean reviews :rolleyes:DKG999
HT System: LSi9, LSiCx2, LSiFX, LSi7, SVS 20-39 PC+, B&K 507.s2 AVR, B&K Ref 125.2, Tripplite LCR-2400, Cambridge 650BD, Signal Cable PC/SC, BJC IC, Samsung 55" LED
Music System: Magnepan 1.6QR, SVS SB12+, ARC pre, Parasound HCA1500 vertically bi-amped, Jolida CDP, Pro-Ject RM5.1SE TT, Pro-Ject TubeBox SE phono pre, SBT, PS Audio DLIII DAC