Seperates for LSI9's
Chewie
Posts: 80
I know that I need more power to properly serve the speakers. A woofer on one of the fronts recently blew and I am told probably from being underpowered. I had not heard of underpowering these causing damage. I planned to get two Outlaw M200 amps for the fronts and leave the center and surrounds powered by the receiver. Will this work well?
Samsung PN60E6500
Denon AVR-E300
Mains: LSI9s
Center: LSIC
Surrounds: LSIFX
Subs: Two Atlas 12's with Rythmik 350W amps in ported 95L box.
Power: Monster 2600 power conditioner
Denon AVR-E300
Mains: LSI9s
Center: LSIC
Surrounds: LSIFX
Subs: Two Atlas 12's with Rythmik 350W amps in ported 95L box.
Power: Monster 2600 power conditioner
Post edited by Chewie on
Comments
-
Why not get a multi channel amp and do right. The Outlaw 7100 could be used to bi-amp your 9's and drive the rest of your speakers as well.
-
I talked to the guys at Outlaw today and said I was considering the M200 or the 7100. After describing all the particulars they suggested getting the M200's, especially with a room size of 40' x 25' x10'. I will get two for the fronts and leave the center on the Yamaha receiver.
I believe the volume went to +6. Under speaker level the fronts are set to what would be a 7 on the slider display. This is how the YPAO configured things.Samsung PN60E6500
Denon AVR-E300
Mains: LSI9s
Center: LSIC
Surrounds: LSIFX
Subs: Two Atlas 12's with Rythmik 350W amps in ported 95L box.
Power: Monster 2600 power conditioner -
40' x 25' x10'! That's a huge room!!
Good luck with your upgrade and don't forget to post some pics. -
Last week I was fortunate to find someone at Audiogon with 3 Outlaw M-200 amps. They are a year old and I got them for $615 delivered. They just arrived today and even came in the original boxes. Now that my LSI's are being fed well all should be ok.Samsung PN60E6500
Denon AVR-E300
Mains: LSI9s
Center: LSIC
Surrounds: LSIFX
Subs: Two Atlas 12's with Rythmik 350W amps in ported 95L box.
Power: Monster 2600 power conditioner