MW6511-MW6510-MW6503-RD-0198-SL3000 BLOWOUT!!!

Well, it is time to clean out some items..

Everything is priced and will be + shipping

Some of the drivers are already dynamated, and glued. the ones that are not glued, and you want them glued before shipping, just speak up, I will make it happen..

MW6511 $30.00ea + Shipping
I have 9 of them, 2 of them are Dynamated, and Glued.

MW6510 $30.00ea + Shipping
I have 3 of these, one of them has small dents in the dust cap, I will take a picture upon request.

MW6503 $30.00ea + Shipping
I have 8 of these, all of them are Dynamated, and Glued.

MW6510 BD0610-W (These are the newer style date 2000) $30.00 + Shipping
I have 3 of these, used but, perfect condition, in original Boxes.

RD-0198 Tweeters $35.00ea + Shipping
I have 8 of these, all are used, but in perfect working condition, 5 of them still have a little bit of that rope caulk that we all used back in the day, it hinders nothing and will come off, I honestly wouldn't worry about it, with the gasket, and installed, you will never see it..

SL3000 Tweeters $15.00ea + Shipping
I have 6 of these, I have only tested these with my meter, I have never listened to them.

Any questions, or want to make an offer, please ask, or DM me..
Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

SVS SB16 X2

Cary SLP-05/Ultimate Upgrade.
Cary SA-500.1 ES Amps
Cary DMS 800PV Network
OPPO UDP 205/ModWright Modification
VPI Scout TT / Dynavector 20x2
Jolida JD9 Fully Modified

VPI MW-1 Cyclone RCM

MIT Shotgun 3 cables throughout / Except TT, and PC’s
«1

Comments

  • Toolfan66
    Toolfan66 Posts: 17,304
    3iqmcvloqq20.jpeg
    8by80h9zdnul.jpeg
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited August 31
    Anyone interested in my custom crossovers that came out of my 1.2tl’s?

    Will not be cheap to ship I’m sure, the inductors are heavy, Solen 16MH’s

    $2000+Shipping

    Just throwing this out there, they are nice.. Don’t be afraid to throw an offer out there..

    5ajcr49pcrui.jpeg
    adyrub2g0f34.jpeg
    kwwh5jla96dh.jpeg
    dknncd3cjoks.jpeg
    Post edited by Toolfan66 on
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited August 31
    Also if you’re interested, I will sell the passives out of my 1.2tl’s as well, one of them is signed by Matt Polk.

    I was wanting to put these in my 2.3tl project but they are a different model number, not sure what the difference is between the two, but probably best to keep the originals out of the 2.3tl’s..

    $250 + Shipping..

    yyogalxtq1qt.jpeg
    t80tueo1my2k.jpeg
    c8oxzf8njjfc.jpeg
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • pitdogg2
    pitdogg2 Posts: 25,571
    Gorgeous work, just gorgeous 😍
  • bcwsrt
    bcwsrt Posts: 1,922
    I want to buy that signed PR just for the cool-factor!

    Brian

    One-owner Polk Audio RTA 15TL speakers refreshed w/ Sonicap, Vishay/Mills and Cardas components by "pitdogg2," "xschop" billet tweeter plates and BH5 | Stereo REL Acoustics T/5x subwoofers w/ Bassline Blue cables | Rogue Audio Cronus Magnum III integrated tube amp | Technics SL-1210G turntable w/ Ortofon 2M Black LVB 250 MM cart | Sony CDP-508ESD CD player (as a transport) | LampizatOr Baltic 4 tube DAC | Nordost & DH Labs cables/interconnects | APC H15 Power Conditioner | GIK Acoustics room treatments | Degritter RCM
  • VR3
    VR3 Posts: 28,747
    I sent @Reagan the link on L the crossovers
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • JayCee
    JayCee Posts: 1,500
    PM sent.
    Speakers: Polk1.2tl's (Uber Mods) Pre/Amp/DAC: PS Audio BHK Signature & 250, DirectStream Cables/IC's: MIT S1Bi-Wire/S1 Balanced +Avel Lindberg 1000VA "Dreadnought" Power Conditioner: PS Audio P15 Power Plant Power Cords: Core Power Technologies Gold, DH Labs Power Plus DIY w/Neotech NC-P301 & P311ends Streaming: Roon ROCK on wifi'd NUC, TP-Link WAP, & Uptone EtherREGEN, AfterDark, Emperor Double Crown Clock, Black Modernize LPS, PS Audio AirLens⟿Ω☯☥☮⟿🔊♩♪♫♬♩♪♫♬♩♪♫♬
  • rceagan
    rceagan Posts: 14
    Trey, "reagan" no longer works for me. I changed my e-mail and couldn't get an administrator to change the settings. Therefore, I am now "rceagan".
  • F1nut
    F1nut Posts: 50,649
    Those crossovers are a work of art.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • xschop
    xschop Posts: 5,000
    Dang, Larry pulled out the heavy artillery.
    Don't take experimental gene therapies from known eugenicists.
  • vader540is
    vader540is Posts: 191
    I don’t even have any speakers that this stuff would work on but I still wanna buy everything.
  • Toolfan66
    Toolfan66 Posts: 17,304
    B) I got label happy today!! B)

    Some of the drivers are sold, will update later. But still plenty for a new home.. 🤪

    enbfegg8hetl.jpeg
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    The MW6503’s are all matched from 1.2tl’s if that maters to anyone..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • decato
    decato Posts: 188
    Toolfan66 wrote: »
    I was wanting to put these in my 2.3tl project but they are a different model number, not sure what the difference is between the two, but probably best to keep the originals out of the 2.3tl’s..

    I can answer this question. The only difference is the mass that is inserted on the bottom of the styrafoam disc. The SW150 in the 1.2tl uses a 70 gram nugget; the SW155 in the 2.3tl has a 40 gram nugget.


  • pitdogg2
    pitdogg2 Posts: 25,571
    decato wrote: »
    Toolfan66 wrote: »
    I was wanting to put these in my 2.3tl project but they are a different model number, not sure what the difference is between the two, but probably best to keep the originals out of the 2.3tl’s..

    I can answer this question. The only difference is the mass that is inserted on the bottom of the styrafoam disc. The SW150 in the 1.2tl uses a 70 gram nugget; the SW155 in the 2.3tl has a 40 gram nugget.
    I believe, correct me if I'm wrong, the original SRS SDA 2 blade/Blade speakers also use the SW150.


  • Toolfan66
    Toolfan66 Posts: 17,304
    pitdogg2 wrote: »
    decato wrote: »
    Toolfan66 wrote: »
    I was wanting to put these in my 2.3tl project but they are a different model number, not sure what the difference is between the two, but probably best to keep the originals out of the 2.3tl’s..

    I can answer this question. The only difference is the mass that is inserted on the bottom of the styrafoam disc. The SW150 in the 1.2tl uses a 70 gram nugget; the SW155 in the 2.3tl has a 40 gram nugget.
    I believe, correct me if I'm wrong, the original SRS SDA 2 blade/Blade speakers also use the SW150.


    Correct!!


    Only the 2.3-2.3tl-SRS2 Pin/Blade use the SW155


    I have had 2 sets of SW150's come through here, one set had the weight, and one did not. My guess is someone forgot to install the weight back in the day..

    I have seen some pretty sloppy workmanship on some polk speakers through the years..

    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited September 3
    UPDATE!!!


    MW6511 $30.00ea + Shipping
    I have 2 of them,

    MW6510 $30.00ea + Shipping
    I have 1 of these, has small dents in the dust cap, I will take a picture upon request.

    MW6503 $30.00ea + Shipping
    I have 2 of these, all of them are Dynamated, and Glued.

    MW6510 BD0610-W (These are the newer style date 2000) $30.00 + Shipping
    I have 3 of these, used but, perfect condition, in original Boxes.

    RD-0198 Tweeters $35.00ea + Shipping
    I have 8 of these, all are used, but in perfect working condition. The five no longer have the rope caulk on them, I swapped out the face plates..

    The SW150's are still available as well..



    Everything else is on hold till I get them boxed up and figure out shipping cost. If something changes I will update..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    Update!!!

    Here is what’s left.

    ckqru4v6p8l2.jpeg
    f9ypwp0ztdeh.jpeg

    All looking for a new home.. 😎

    Anyone in need of a SL2500, pay shipping and it’s yours..

    The Crossovers are still pending, need to find the right packaging materials for shipping cost..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited September 7
    RD-0198 Tweeters are Sold..

    SL2500 is available for free. You pay shipping. It’s one of those tweeters that most don’t care about, but you never know, if not, it can always see it’s demise in the landfill.. 😂

    68h6k9obg0ij.jpeg


    Everything that has been paid for has shipped..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited September 11
    Bump!! For what’s left,

    Still haven’t found a box or boxes for the crossovers, but I have been super busy at work this week, my apologies. Soon I Promise..

    0vmx1sf6ndhy.jpeg

    ao8bcdcdhfe0.jpeg

    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • rceagan
    rceagan Posts: 14
    Anxious to work out a deal on the crossovers.
  • VR3
    VR3 Posts: 28,747
    Larry home depot should have boxes and 2 inch foam board to get the job done 😁
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
  • xschop
    xschop Posts: 5,000
    F1's got some foam left over from his frame mods.
    Don't take experimental gene therapies from known eugenicists.
  • pitdogg2
    pitdogg2 Posts: 25,571
    U-haul also has some HD extra thick boxes.
  • rceagan
    rceagan Posts: 14
    Trey packs things to withstand a tactical nuclear blast!
  • Toolfan66
    Toolfan66 Posts: 17,304
    I have the crossovers boxed up, it is two 50lb boxes, I would be willing to split the shipping costs..
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    Crossovers are officially SOLD!!!
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited September 17
    Okay, one last bump, it’s all going back in storage this weekend.. I want to get back to my project.. 😎

    utecdh9yzymb.jpeg

    yplkqt4aef2o.jpeg
    sa9v78g0nus2.jpeg
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • Toolfan66
    Toolfan66 Posts: 17,304
    edited September 19
    The 2 MW6503’s, the MW6511, and the SW150 Passives are Pending Sale.

    I appreciate everyone that helped thin the heard.

    Thank You!!!!
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s