Blown caps on a PSW10 Subwoofer
worthashot
Posts: 3
I have a PSW10 Sub that I sidelined once it started humming as soon as it was plugged in. I pulled the plate off to take a look. I started by replacing the 4700uF caps (sort of a lazy move on my part). When that didn't work, I disassembled the unit and low and behold, I see caps C22 and C24 are blowed up real good. There's nothing left to read values from so I was hoping someone could either provide values for me or better yet a schematic. Could try to post a picture but it pretty much would just show swirls of cylindrical cardboard where C24 and C22 used to be.
Comments
-
I should add this is for a 2007-10-20 board, part number BF-01600000
-
Here's the board:
