SL6000 and SL6500 tweeters

Question, where will I be able to find the specs for these tweeter? I’m wondering if there’s any difference?

Comments

  • skrol
    skrol Posts: 3,372
    Dang, I have specs for the SL-6001 and the SL-6503. There is a difference between these two for what it's worth:
    SL-6001
    * Size / Type = 3.75" Tweeter Dynamic Balance® Trilaminate Dome
    * SPL = 91 db @ 1w/1m
    * Wattage = 45 Watts RMS / 90 Watts Peak
    * TriLaminte Dome Tweeter
    * Response = 1600 Hz. to 25 kHz.
    * Weight = 1 pound ea.
    * Magnet = Un-Shielded
    * VC = 1"
    * Ohms = 8 ohms
    * Markings both the SL6001 and BD0113-A part numbers are on the tweeter.

    SL-6503
    * Size / Type = 3.450" Dynamic Balance® poly dome tweeter
    * SPL = 92 db @ 1w/1m
    * Wattage = 40 Watts RMS / 80 Watts Peak
    * Polymer dome tweeter
    * Response = 1.5 kHz. to 21 kHz.
    * Weight = 1 pound ea.
    * Magnet =Un- Shielded
    * VC = 1" ( 25 mm)
    * Ohms = 8 ohms
    Stan

    Main 2ch:
    Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.

    HT:
    Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60

    Other stuff:
    Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601
  • cortico
    cortico Posts: 587
    Thanks, I can't find any info either, they all look Identical in shape...

    I like to have a couple of replacement drivers of out of productions speakers, just in case...

    I will contact Polk CS for more info.
  • boston1450
    boston1450 Posts: 7,630
    I tried also with no luck. What speakers did they come out of ? (i didnt see listed) i will try again. Maybe try looking that way- might come upon something
    ..
  • cortico
    cortico Posts: 587
    My speaker (LS70) came with SL 6000. I found a SL6500 with a tag that says LS-FX) my gut feeling says it would be fine... I doubt there are many variations....
  • boston1450
    boston1450 Posts: 7,630
    Got a fair amount of Read On them & thats about it. Why Polk make things so hard
    ..
  • cortico
    cortico Posts: 587
    edited February 2019
    Just bumping this to see if anyone can help... thanks!
  • 55LS70
    55LS70 Posts: 184
    FWIW. I replaced the SL 6000 tweeters, in my LS70's, with SL 6001's. The swap worked fine. I think the only difference between the two is that the latter has a humbucker magnet attached to it. Beyond that I've heard of no other tweeters that might serve as a replacement. Good luck with this.
    Decware CSP3 Preamp, RCA 6DJ8, 2 X Rocket 6N1P-EV's, Cary SLA70B Signature V2 Amplifier: 2 X Mullard GZ32's, 2 X RCA/GE 5691's, 4 X Tung-Sol 6550's

    Cambridge Audio 640C V2 CD Player & Dacmagic DAC

    Rega Planar 3: Deep Groove Subplatter, P3 Motor
    upgrade, Dynavector 10x5, JA Michell counterwieght, Cardas tonearm wiring and Mapleshade stand

    Parks Audio Budgie Hybrid Phonostage with BEL 6922 tubes, Polk Audio LS70's

    H.H. Scott 330D AM/FM Tuner with H.H. Scott 335 Multiplex adaptor.
  • jrebisz
    jrebisz Posts: 3
    Hello. I’m trying to find (and purchase) replacement tweeters for my Dads LS 90s.
    It looks like SL6000 or SL6001s will apply.
    Where to buy ?
    Thanks
    Joe Rebisz.
  • F1nut
    F1nut Posts: 50,495
    jrebisz wrote: »
    Hello. I’m trying to find (and purchase) replacement tweeters for my Dads LS 90s.
    It looks like SL6000 or SL6001s will apply.
    Where to buy ?
    Thanks
    Joe Rebisz.

    eBay is likely your only option.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • ChrisD06
    ChrisD06 Posts: 929
    jrebisz wrote: »
    Hello. I’m trying to find (and purchase) replacement tweeters for my Dads LS 90s.
    It looks like SL6000 or SL6001s will apply.
    Where to buy ?
    Thanks
    Joe Rebisz.

    I was speaking with a guy in the US not too long ago and he mentioned that Polk themselves had the tweeter in stock and he bought two, so maybe give them a call. This was a couple months back but it's worth a shot.
  • jrebisz
    jrebisz Posts: 3
    Thank you. I’ll give Polk a try !
  • jrebisz
    jrebisz Posts: 3
    FYI, I called - Polk checked inventory with no result and then said eBay was my best bet.
  • F1nut
    F1nut Posts: 50,495
    Like I said
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."


    President of Club Polk

  • ChrisD06
    ChrisD06 Posts: 929
    https://forum.polkaudio.com/discussion/172427/polk-sl6001-and-sl6501-trilaminate-tweeters-whats-the-difference

    As per what Ken said in this thread, the RD6517-1 is a suitable replacement for the SL6001 and 6501... I know you need the SL6000 and SL6500, but perhaps they're interchangeable? Maybe someone could chime in if they know for sure?
  • ChrisD06
    ChrisD06 Posts: 929
    @jrebisz

    Should have tagged you, my bad