PSA Veneer Sourcing

Going to be starting my M7c overhaul in the near future. Waiting for @westmassguy to finish my upgraded TL X/O’s. I’ve got the new RD198’s, Blackhole 5, Dynamat extreme, Armacell tape, Capped SS Allen head bolts & H- nuts. Think that’s everything except the cabinet refinishing itself. My plan is to veneer 4 sides (incl. the front) & attach a modified grill w/ magnets. Where is everyone getting their PSA backed veneer from? Most places I’ve contacted won’t ship to Alaska for some reason. It’s just a box of wood, I don’t understand the issues. Anyway I’m looking for some more sources to try. Any suggestions would be greatly appreciated. Also need to find out about the recessed magnet attachment for the grills, I’m not familiar with them.
Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Polk Monitor 7cTL's, Polk 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM

Comments

  • westmassguywestmassguy Posts: 6,284
    edited April 2018
    https://www.ovisonline.com/?gclid=CJWS4qDTh6YCFaE65QodLmt0ug
    I get my Quartered Walnut from them. If you're going Walnut, the Walnut Edgebanding is a perfect for the front edge.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer
    Cables: Speaker: Furez 10/2 with GLS Locking Banana Plugs
    Interconnect: Furez 10/2 with SpeakONs
    ICs: Custom Furez by Douglas Connections
    Den:
    Bose 901 Series II Continentals Restored, Re-Built Equalizer with Elna Silmic IIs, Sonicaps, and Silver Mica Caps
    Carver CT-3 Pre, Carver C-500

    dhsspeakerservice.com/
    Exclusive Distributor of Gimpod's Custom SDA Circuit Boards

    "And keep her under 70, would you, huh? Betty likes a slow ride"
  • ThomasDThomasD Posts: 210
    Thanks David, I must have missed their site. I’ll contact them.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Polk Monitor 7cTL's, Polk 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • MrBuhlMrBuhl Posts: 2,379
    I've bookmarked this thread as well - anyone have a good source for PSA backed but figured veneers? Thinking ahead to my CRS 4.1TL's - I'm likely going cherry but really like the more figured look vs. quartersawn. Thanks! (sorry to thread-jack)
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel , Dodd 50W Dual Mono EL34 Amp, Eastern Electric MiniMax Preamp, Polk SDA2BTL (fully modded), A/L 1000VA Dreadnought, Canare 4s11 SDA cable, SACD Marantz DV8300, Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
    LA Pass Labs X150.5 Amp, Audible Illusions L1 Preamp, Vincent Pho-700 Phono Pre, Polk LSIM705, Sony S9000ES CD/DVD/SACD, Audioengine B1, MIT AVt3 Speaker & RCA Cables, PS Audio power cables

    Dodd Mid Level Preamp
    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Soundcraftsmen PCR800
    Yamaha YP-D6
    Signal Cable Silver Resolution IC's
    McCormack DNA-1 Power Drive Amp
    Eastern Electric Minimax CDP
    MFA based Cocci Tube Preamp
    Audire Model 1 Amplifier


  • ThomasDThomasD Posts: 210
    MrBuhl wrote: »
    I've bookmarked this thread as well - anyone have a good source for PSA backed but figured veneers? Thinking ahead to my CRS 4.1TL's - I'm likely going cherry but really like the more figured look vs. quartersawn. Thanks! (sorry to thread-jack)

    Hey, I'm with you. I love the 'figured' veneers too. I'm just looking on @westmassguy suggested site, Ovisonline.com & Veneerfactoryoutlet.com. I'm leaning towards the Rosewood options but not finding edge banding to compliment. There have been some incredible speaker veneer projects on this site. Hope some more 'chime' in and link pics of their projects.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Polk Monitor 7cTL's, Polk 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • ThomasDThomasD Posts: 210
    I really like the 'Santos' Rosewood veneer on the Ovis site. Seems all my favorites are not cheap ($200 a 2'x8' sheet) & out of stock. And most have a 2 sheet minimum. May just have to bite the bullet and place the order. Shipping isn't too outrageous for Alaska, $65 for parcel post. Order would be pending until new shipment of item is available anyway. Hmmmm..........
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Polk Monitor 7cTL's, Polk 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
  • MrBuhlMrBuhl Posts: 2,379
    Oh man - I didn't even think about there being minimums on that stuff. Yikes!

    Yes, there have been some great veneer projects on here, like you, I'm not afraid to spend a little coin to get a great veneer, but I am afraid I'll screw it up LOL. I want these 4.1TL's to be permanent "keeper" SDA's - so I want to do them right, and the exact way I want if you know what I mean!

    Good luck with your project - can't wait to see some pics when you get working on it!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel , Dodd 50W Dual Mono EL34 Amp, Eastern Electric MiniMax Preamp, Polk SDA2BTL (fully modded), A/L 1000VA Dreadnought, Canare 4s11 SDA cable, SACD Marantz DV8300, Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000
    LA Pass Labs X150.5 Amp, Audible Illusions L1 Preamp, Vincent Pho-700 Phono Pre, Polk LSIM705, Sony S9000ES CD/DVD/SACD, Audioengine B1, MIT AVt3 Speaker & RCA Cables, PS Audio power cables

    Dodd Mid Level Preamp
    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Soundcraftsmen PCR800
    Yamaha YP-D6
    Signal Cable Silver Resolution IC's
    McCormack DNA-1 Power Drive Amp
    Eastern Electric Minimax CDP
    MFA based Cocci Tube Preamp
    Audire Model 1 Amplifier


  • ThomasDThomasD Posts: 210
    @MrBuhl I understand completely. At my stage in life I'm looking for 'end game' projects that will last. Don't have the time & patience to cut corners and 'get it right the next time'.
    I've only got a pair of M7c's & SDA 2A's right now but I'd like them to eventually be 'signature' pieces for my small collection. Ovis does have quite a selection of 'exotic' veneers.
    Carver M4.0t, M1.0t, M200t, TX2, C1, C2, Marantz 2230, 2010, Rega Brio, Marantz Imperial 7's, Klipsch Heresy III, Quartets, KG4's, KG1's, 'The Sixes', R-12SW, Polk SDA 2a's, Polk Monitor 7cTL's, Polk 4a's, Zu Audio Dirty Weekends, Pro-ject Acryl TT, Cambridge 851N, 351C, Panamax 5300PM
Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!