Question re IEC connectors: 15amp vs 20amp

Joey_V
Joey_V Posts: 8,552
edited February 2018 in 2 Channel Audio
So, I have a Torus/Bryston RM15 coming in. The output connector (on the back of the unit) is 20amp. I don’t have a special power cord that has a 20amp iec connector.

All my 4 wel power cords are 15amp.

Now, the options are:
1. Use the stock power cord.
2. Send my AQ Wel power cord to AQ for 20amp iec retermination for $500.
3. Trade my newer version 15amp Wel for his older version 20amp Wel. Same length, he gives me $400.
4. Buy a Pangea 20 to 15 adaptor for $29.

I guess my most pressing question is - will putting a 20 to 15 amp adaptor have a significant sonic impact??

Rather than go through the trouble of having my wel reterminated or downgrading to the older version.

Though $400 sounds good too.

https://www.amazon.com/gp/aw/d/B06XY6TW67/ref=mp_s_a_1_7?ie=UTF8&qid=1519504350&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=20+amp+to+15+amp+adapter+iec&dpPl=1&dpID=410ZgKGl44L&ref=plSrch#immersive-view_1519504463344
Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
· Share on FacebookShare on Twitter

Comments

  • F1nut
    F1nut Posts: 50,551
    Option 4 and sleep well.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    F1nut wrote: »
    Option 4 and sleep well.

    Well that was quick. Good to know
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,551
    Shunyata makes one as well....costs more of course.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    edited February 2018
    F1nut wrote: »
    Shunyata makes one as well....costs more of course.

    Yes funny you mention that, my friend just texted me the link and picture. $150 for it... if I squint that's pretty much the cost of retermination. I would check again to see if retermination is really $500... that seems like an awful lot if they are just changing out the female end of the cord...

    Pangea for $29, makes sense... I doubt I could tell the difference between an inch of copper.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    edited February 2018
    Found it

    Thanks Jesse

    https://www.musicdirect.com/cables/shunyata-15amp-cable-to-20amp-component-adapter-ea
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,441
    I'll echo Jesse, but I guess I'm wondering why they put a 20amp IEC on it to begin with? Does it really pull that kind of amperage?
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,551
    edited February 2018
    If it is rated to pass 20 amps and has 20 amp outlets installed it has to have a 20 amp inlet.

    Technically speaking, the owner could swap the 20 amp inlet for a 15 amp, but if they sold it like that down the road and bad juju happened they may open themselves up for legal action.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    I believe if it’s a power conditioner then more current capacity is welcome, probably why even though the outlet plugs are 15a, the inlet is 20a
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,441
    Got it I'm sorry i thought it was i piece of audio gear not a power source.
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    I believe even if aq reterminated my wel, it would just be the iec section but the wire is the same. I think stock wel should handle the amperage into a 20a iec
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,551
    Joey_V wrote: »
    I believe if it’s a power conditioner then more current capacity is welcome, probably why even though the outlet plugs are 15a, the inlet is 20a

    If it has a 20 amp inlet it has to have 20 amp outlets installed.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,551
    edited February 2018
    Joey_V wrote: »
    I believe even if aq reterminated my wel, it would just be the iec section but the wire is the same. I think stock wel should handle the amperage into a 20a iec

    Yep, same cord, different IEC termination.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • GlennDog
    GlennDog Posts: 3,120
    Please . . .

    Bigger, Better, More! You know you WANT it!

    http://www.psaudio.com/directstream-p20-power-plant/
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampizator Baltic 4 DAC
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    GlennDog wrote: »
    Please . . .

    Bigger, Better, More! You know you WANT it!

    http://www.psaudio.com/directstream-p20-power-plant/

    Hahaha omg... I have read about this from AA.

    Yes, would be nice.. but I'm not wanting to spend $10K for a power unit. Plus my wife banned me from non-lateral movements until 2019. :(

    The Torus RM15 gets lots of good press... plus at the price I got it for, it's a steal.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter