This is sad

1…1112141617

Comments

  • littlewoodboats
    littlewoodboats Posts: 823
    edited May 2017
    Upon reflection would this be a stereo pair or a monster pair of monoblocks? If monoblocks could they be jumpered to make them common ground?

    How would one go about integrating the isolation transformer to get the full SDA effect?
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,396
    littlewoodboats wrote: »
    Upon reflection would this be a stereo pair or a monster pair of monoblocks? If monoblocks could they be jumpered to make them common ground?

    How would one go about integrating the isolation transformer to get the full SDA effect?

    You would first need to register them with the EPA and pay the carbon offset tax, and then the public utilities commission would need to inspect them before you could bring them on line. They may also need to be registered as potential weapons with local law enforcement, but that varies by jurisdiction.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • littlewoodboats
    littlewoodboats Posts: 823
    nooshinjohn wrote: »
    littlewoodboats wrote: »
    Upon reflection would this be a stereo pair or a monster pair of monoblocks? If monoblocks could they be jumpered to make them common ground?

    How would one go about integrating the isolation transformer to get the full SDA effect?

    You would first need to register them with the EPA and pay the carbon offset tax, and then the public utilities commission would need to inspect them before you could bring them on line. They may also need to be registered as potential weapons with local law enforcement, but that varies by jurisdiction.

    With the silicone that must have been involved don't forget the hazmat fees.
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,008
    littlewoodboats wrote: »
    nooshinjohn wrote: »
    littlewoodboats wrote: »
    Upon reflection would this be a stereo pair or a monster pair of monoblocks? If monoblocks could they be jumpered to make them common ground?

    How would one go about integrating the isolation transformer to get the full SDA effect?

    You would first need to register them with the EPA and pay the carbon offset tax, and then the public utilities commission would need to inspect them before you could bring them on line. They may also need to be registered as potential weapons with local law enforcement, but that varies by jurisdiction.

    With the silicone that must have been involved don't forget the hazmat fees.

    Someone is on a roll here!

    · Share on FacebookShare on Twitter
  • tonyb
    tonyb Posts: 32,957
    Gives a new meaning to " I've fallen and I can't get up."
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
    · Share on FacebookShare on Twitter
  • gudnoyez
    gudnoyez Posts: 8,114
    edited May 2017
    As Frank Zappa would say, quite a set of Mammalian Protrubrances. When the water gets on em the ninnies get ridgid and look pretty bold, its a common reaction that makes an attraction whenever its cold.
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
    · Share on FacebookShare on Twitter
  • lightman1
    lightman1 Posts: 10,788
    er90qavdf7ke.gif
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,830
    treitz3 wrote: »
    Here ya' go Russ...

    cbc40c955921098735dac7f7ee157b5b.jpg

    This goes with everything else in this thread that is useless. Might as well enjoy the time wasted as we go....

    Tom
    I'll bet they're real.













    I meant her fingernails.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • motorstereo
    motorstereo Posts: 2,130
    Here's my 2 little dabs of silicone fwiw...... :) when I first came here many years ago I also butted heads with F1nut. I had posted pics and descriptions of my 2.3s and crossovers which Jesse (much to my dismay at the time) critiqued. My tender sensibilities were highly offended and I was not happy to have it pointed out that I was doing and had done things completely wrong (which I was). Yes I even made it to Jesse's bozo list lol. But things have changed over the years as I listened to and took his advice and used his vast knowledge of all things Polk. Now because of that my rig has become something I could only dream about in the past. So that being said I'd like to issue a public apology to F1nut from those early years and thank him kindly for the sage advice he's given me along my journey. I could not have achieved what I have now if it wasn't for you Jesse.

    I'm thinking possibly this advice could be used by a certain trio but more than likely won't. Afterall most of us are here to better or at least talk about our Polk rigs and not worry about how someone comes across. One thing that cannot be argued or overlooked is Jesse knows exactly what he's talking about.
    · Share on FacebookShare on Twitter
  • tonyb
    tonyb Posts: 32,957
    Good point Motor, and thanks for sharing that. The membership here, or at any forum is full of different personalities which is hard to decipher over the internet, especially for newbs. Over time, you become more acclimated to these personalities and it becomes easier to converse with everyone without getting butthurt. Dare I say, you may even find commonality, make friends, learn a few things along the way. Heaven knows, nobody wants to do any of those things though, right ? lol
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
    · Share on FacebookShare on Twitter
  • mrbiron
    mrbiron Posts: 5,711
    Don't pump F1's tires....he's an ****!
    People much smart than myself told me so, through a round about way, in a 16 page thread...

    Mark this as insightful please. i don't have a lot of those in my repertoire.
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
    · Share on FacebookShare on Twitter
  • Unknown
    Unknown
    This content has been removed.
  • Msabot1
    Msabot1 Posts: 2,098
    I STILL like the gorilla one....LOL!..
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,224
    edited May 2017
    0
    · Share on FacebookShare on Twitter
  • mrbiron
    mrbiron Posts: 5,711
    52ed73f527b69f2323d33caa903e178b_just-random-stuff-on-most-random-meme_482-636.jpeg

    This thread needs a little.....more.....confusion.....
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    gudnoyez wrote: »
    As Frank Zappa would say, quite a set of Mammalian Protrubrances. When the water gets on em the ninnies get ridgid and look pretty bold, its a common reaction that makes an attraction whenever its cold.

    Joe's Garage Crew ****! Nice!
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    mrbiron wrote: »
    52ed73f527b69f2323d33caa903e178b_just-random-stuff-on-most-random-meme_482-636.jpeg

    This thread needs a little.....more.....confusion.....

    LOL. That makes more sense than much of what has been posted. :)
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • mikeyb128
    mikeyb128 Posts: 2,885
    3sgabvet61ac.png
    2 channel:
    Bryston 4B3, Bryston BDA3, Cary SLP05, Shanling CDT1000SE with parts conneXion level 2 mods, Nottingham analogue ace space 294, soundsmith Carmen MKii, Zu DL103 MKii, Ortofon MC 20 MKii, Dynavector XX2 MKii, Rogue Audio Ares, Core power technologies balanced power conditioner, Akiko Corelli power conditioner with Akiko Audio HQ power cable, Nordost heimdall 2, Frey 2, interconnects, speaker and power cables, Focal Electra 1028 BE 2, Auralic Aries Femto, Black diamond racing cones, ingress audio level 1 roller blocks, JL Audio E110 with Auralic subdude, Primacoustics room treatments.
    Theater:
    Focal Aria 926,905,CC900, SVS PB ultra x2. Pioneer Elite SC85, Oppo BDP93, Panamax M5400PM, Minix neox6, Nordost Blue heaven LS power cables.

    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,396
    BUMP!!!
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,277
    Is that one of your 6501's?
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,420
    nbrowser wrote: »
    For all of you, this is the saddest...made me shed a tear or three....


    lbsyesmzwa7i.jpg

    Is that a reconed Polk MW?
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,420
    Well a refoam is very easy. But if that is a polk recone it is very sad.
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    Cheap a $ $ stuff breaks obviously. Expensive s h | t t e breaks less obviously. :)
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,277
    nbrowser wrote: »
    txcoastal1 wrote: »
    Is that one of your 6501's?

    Nope...just some random driver photo off the interwebs...sad picture :(

    Well damn dude, I thought it was yours, and since it is not yours or another forum member IDGAS :p
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,516
    IDGASE
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,277
    nbrowser wrote: »
    txcoastal1 wrote: »
    nbrowser wrote: »
    txcoastal1 wrote: »
    Is that one of your 6501's?

    Nope...just some random driver photo off the interwebs...sad picture :(

    Well damn dude, I thought it was yours, and since it is not yours or another forum member IDGAS :p

    I'm not even sure I've got any MW6501's in the house, I remember all the SDA MWs were 6500s when I tore them apart for ring installation...not sure what my Monitor 5s have in them off memory, could be 6501s as they are really old ('79).

    I don't know shiite about it either, just googled Gimpod's website...to make me look smart :)
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • mhardy6647
    mhardy6647 Posts: 33,772
    edited May 2017
    nbrowser wrote: »
    For all of you, this is the saddest...made me shed a tear or three....


    lbsyesmzwa7i.jpg

    That's not sad...
    Now this... this is sad. :(

    02043.jpg

    http://audiokarma.org/forums/index.php?threads/when-bad-people-happen-to-good-woofers.359816/
    · Share on FacebookShare on Twitter
  • mrbigbluelight
    mrbigbluelight Posts: 9,717
    You really shouldn't use those as jack supports when working on your tractor. At least that's my opinion.
    Sal Palooza
    · Share on FacebookShare on Twitter
  • mrbigbluelight
    mrbigbluelight Posts: 9,717
    One person in the AK thread offered:

    "They should be broke in now.

    I ..... you have to hand it to him ..... that was pretty good.
    Sal Palooza
    · Share on FacebookShare on Twitter
  • mrbigbluelight
    mrbigbluelight Posts: 9,717
    Mitosis or ...... wait a second. Is that .... are they ....... isn't that how puppies tweeters are made ? Should that be shown on this board ? :o
    Sal Palooza
    · Share on FacebookShare on Twitter