Have SDA2A - Want SDA2BTL

MrBuhl
MrBuhl Posts: 2,419
edited December 2015 in DIY, Mods & Tweaks
So I found out (via installing Larry's Rings) that I had SDA2A's and not the 2B's I had always thought they were. Still happy speakers, but I just couldn't get over that longing for what I thought I had. Cabinets are about the same... already have the rings installed, dynamat on drivers, cabinets sealed and No-Rez, in fact early on I think they even used some old 2A cabinets on 2B studios if I recall - why not?

Picked up some bargain drivers from Deron's part-out, along with a set of modded 2B crossovers. Then Partsconnexion had their 25% off sale, and I said what the hell... in for a penny, in for a pound... so I picked up some ESA series Clarity Caps and the requisite Mundorff resistors to TL them and I was off to the (turtle speed) races with Dave as my guide! (he's prepping some Erse inductors for me now too!). Interesting work for JoeHomeOwner.

Here's the start point on the crossovers and finished (but untested) product. I have the 198's from Polk's dependable customer service dept. Just need some time to test and put it all together! Already have an 800v/a Dread for them, so it should ramp up nicely. Plan to use these with the Dodd MLP and 50W. Yummy!

nej5iuap3zo3.jpg

zafjlfrqq255.jpg

9tx4yn94iu96.jpg

VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

Polk SDA1c modded
Polk CRS+ 4.1TL modded (need veneer)
Polk SDA2BTL (fully modded)
A/L 1000VA Dreadnought Canare 4s11 SDA cable
SACD Marantz DV8300
Sony S9000ES CD/DVD/SACD
Yamaha YP-D6
Soundcraftsmen PCR800
Audible Illusions L1 Preamp
Vincent MFA based Cocci Tube Preamp
Pho-700 Phono Pre
Signal Cable Silver Resolution IC's






Comments

  • westmassguy
    westmassguy Posts: 6,850
    Looks great Ed.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
  • voltz
    voltz Posts: 5,384
    HEY Nice one ED!!
    2 ch- Polk CRS+ * Vincent SA-31MK Preamp * Vincent Sp-331 Amp * Marantz SA8005 SACD * Project Xperience Classic TT * Sumiko Blue Point #2 MC cartridge

    HT - Polk 703's * NAD T-758 * Adcom 5503 * Oppo 103 * Samsung 60" series 8 LCD
  • MrBuhl
    MrBuhl Posts: 2,419
    Thanks guys, the proof is in the puddin as they say but I'm hopeful!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • MrBuhl
    MrBuhl Posts: 2,419
    edited December 2015
    New Erse inductors arrived today from Westmassguy - Thanks David they are perfect as always!

    Hooked everything up for some tests, and miraculously, worked like a charm first time!

    Made some stand offs for the crossovers from heavy nylon tubing I had around, and mounted crossovers thru them with stainless screws. Covered existing SDA connection hole with a couple of stainless fender washers (and some neoprene washers), cinched with a stainless bolt for a good airtight seal. Mounted the Erse's with stainless screws.

    Now to button them all up for the real weekend test - listening!

    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • MrBuhl
    MrBuhl Posts: 2,419
    edited December 2015
    50fyjxehscd3.jpg
    furf9rvffde1.jpg


    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • MrBuhl
    MrBuhl Posts: 2,419
    vuk31a571dqr.jpg
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • westmassguy
    westmassguy Posts: 6,850
    Looking good Ed.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
  • MrBuhl
    MrBuhl Posts: 2,419
    Thanks David - and thanks for all your help with them!
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • westmassguy
    westmassguy Posts: 6,850
    MrBuhl wrote: »
    Thanks David - and thanks for all your help with them!
    You're welcome Brother
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/