Oppo 93 to Sony x850b hdmi issue

nooshinjohn
nooshinjohn Posts: 25,448
in Troubleshooting
My oppo 93 works perfectly on my old LG but does not play well at all with my new Sony. When I even connedt a known good hdmi between the two, the oppo freezes up and will not even allow the eject button to be used. Stand alone, and it works just fine. Any one have even the slightest clue on this?
The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
· Share on FacebookShare on Twitter

Comments

  • gudnoyez
    gudnoyez Posts: 8,124
    Does it at least recognize it and display the Oppo logo when you switch the input to Blu/Dvd on the remote, or does it say Blu Ray player not detected?
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,448
    Yes... Should have stated that. The oppo logo appears on the tv but the re are no functions at all from the player that work. Not even the eject button.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • txcoastal1
    txcoastal1 Posts: 13,306
    I googled.....oppo 93 locks up on sony tv and this is what came up

    previous Official release version BDP9x-80-0513 - OPPO ...
    https://www.oppodigital.com/blu...bdp-93/bdp9x-firmware-80-0513.asp...
    Jun 3, 2014 - Resolved a HDMI handshaking issue introduced by a Sony firmware update to ... locked up once its HDMI 1 output was connected to the television. ... If both the TV tuner and the BDP-93/95 player were connected to the same ...

    https://www.oppodigital.com/blu-ray-bdp-93/bdp9x-firmware-80-0513.aspx

    Hope this helps
    Cheers
    Ron

    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,448
    Thanks TX.. I will do the downloads tomorrow. Getting that sucker on the wall today way a big project. Everything was measured and re measured ten more times. I even had to factor in the opening of my turntable lid.

    Thanks again.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter
  • tonyb
    tonyb Posts: 32,983
    edited July 2015
    Should be noted the vast majority of these 4k TV's need updates immediately. Always do the updates when you first plug them in and set up. You can also find calibration settings online.

    John, how's the pic quality bro ?
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
    · Share on FacebookShare on Twitter