PS Audio P10 - any experience?

Joey_V
Joey_V Posts: 8,552
in 2 Channel Audio
Hey guys,

Any experience with the PS Audio P10 power regenerator? Looks like reviews have been very favorable. Would definitely like to have regenerated power and would definitely appreciate some surge protection. Would hate to come home to busted speakers and upstreams.

Thoughts?

Btw, I have a single dedicated 20 amp line in the room and the room also has a bunch of outlets shared to a 15 amp circuit.
Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
· Share on FacebookShare on Twitter

Comments

  • mrbiron
    mrbiron Posts: 5,711
    edited March 2015
    Defer to Darqueknight....
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
    · Share on FacebookShare on Twitter
  • GlennDog
    GlennDog Posts: 3,120
    What did you discover re: the PS10?
    There's one local . . . and . .um . . I'm considering it!
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampizator Baltic 4 DAC
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    I discovered that I would like one but that I have to complete the system first lol
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • GlennDog
    GlennDog Posts: 3,120
    I'm going to check out the sellers system/PS 10 this weekend . . .
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampizator Baltic 4 DAC
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
    · Share on FacebookShare on Twitter
  • Nightfall
    Nightfall Posts: 10,086
    @DarqueKnight has experience with PS Audio re-generators.
    afterburnt wrote: »
    They didn't speak a word of English, they were from South Carolina.

    Village Idiot of Club Polk
    · Share on FacebookShare on Twitter
  • DarqueKnight
    DarqueKnight Posts: 6,765
    edited August 2015
    Joey_V wrote: »

    Any experience with the PS Audio P10 power regenerator?

    I have a P10 running my source components and preamps in my 2 channel system and another P10 running three GFA-5500 power amps, two preamps, and a Blu-ray player in my home theater system. I will be getting a third P10 to run my entire office system.

    The P10 can't handle some high power/high current amps, like my former Halo JC 1s and my current Pass X600.5s.

    Reviews of my P10s are here:

    studies-on-residential-power-line-noise-part-10-ps-audio-p10-ac-regenerator

    tweaking-home-theater-part-7-ps-audio-perfectwave-p5-and-p10-ac-regenerators





    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    Thank you DK.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • GlennDog
    GlennDog Posts: 3,120
    Joey_V wrote: »
    Thank you DK.

    Ditto!
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampizator Baltic 4 DAC
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
    · Share on FacebookShare on Twitter
  • WagnerRC
    WagnerRC Posts: 2,157
    thank you
    · Share on FacebookShare on Twitter
  • miner
    miner Posts: 1,305
    I have a P5 with the following hooked up to it:
    McIntosh C2300 pre
    McIntosh MC452 amp
    McIntosh MCD500 SACD player

    It handles the load quite well and does wonders for regeneration. This unit replaced a Power Plant Premier.
    [
    · Share on FacebookShare on Twitter
  • megasat16
    megasat16 Posts: 3,521
    Joey, I am sure you aware there is a serious contender from Accuphase for clean power source.

    But for the kind of the money you are spending for Accuphase or PS, you could install a dedicated clean power source with solar panels on your roof and dedicated circuits from the solar panels that shares nothing (no neutral, no earth ground) with the dirty AC lines. It's what I would do if I seriously need the clean power. 10K worth of Solar Power generations equipment should produce enough power to use your 2 Channel system for a few hours daily. Just don't hook up the solar circuit to your Edison power line.
    Trying out Different Audio Cables is a Religious Affair. You don't discuss it with anyone. :redface::biggrin:
    · Share on FacebookShare on Twitter
  • DarqueKnight
    DarqueKnight Posts: 6,765
    @Bluefox has a solar power system for his 2 channel system.
    Proud and loyal citizen of the Digital Domain and Solid State Country!
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    megasat16 wrote: »
    Joey, I am sure you aware there is a serious contender from Accuphase for clean power source.

    But for the kind of the money you are spending for Accuphase or PS, you could install a dedicated clean power source with solar panels on your roof and dedicated circuits from the solar panels that shares nothing (no neutral, no earth ground) with the dirty AC lines. It's what I would do if I seriously need the clean power. 10K worth of Solar Power generations equipment should produce enough power to use your 2 Channel system for a few hours daily. Just don't hook up the solar circuit to your Edison power line.

    Really??
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    miner wrote: »
    I have a P5 with the following hooked up to it:
    McIntosh C2300 pre
    McIntosh MC452 amp
    McIntosh MCD500 SACD player

    It handles the load quite well and does wonders for regeneration. This unit replaced a Power Plant Premier.

    That's a real killer system
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    DarqueKnight wrote: »
    @Bluefox has a solar power system for his 2 channel system.

    I have solar because the darn amps, in the summer, create so much heat I have to run the AC just to listen to music, and that made my electricty bill go through the roof. However, the solar is for the whole house, not just the stereo. I am thinking of looking into the batteries Musk/Tesla will be releasing to see if it is feasible to use them to only power the stereo at night. I would guess there is some way to attach their output to the dedicated lines for the stereo.
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    Now I add to my list for the real house - solar power for media room.

    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • miner
    miner Posts: 1,305
    Joey_V wrote: »
    miner wrote: »
    I have a P5 with the following hooked up to it:
    McIntosh C2300 pre
    McIntosh MC452 amp
    McIntosh MCD500 SACD player

    It handles the load quite well and does wonders for regeneration. This unit replaced a Power Plant Premier.

    That's a real killer system

    Which would mate well with your Sonus fabers. I am using the Cremona Auditor Ms with a REL B1.
    [
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    miner wrote: »
    Joey_V wrote: »
    miner wrote: »
    I have a P5 with the following hooked up to it:
    McIntosh C2300 pre
    McIntosh MC452 amp
    McIntosh MCD500 SACD player

    It handles the load quite well and does wonders for regeneration. This unit replaced a Power Plant Premier.

    That's a real killer system

    Which would mate well with your Sonus fabers. I am using the Cremona Auditor Ms with a REL B1.

    That's sweet man

    I have heard Cremona auditor m on 452... Suweet
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter