Blackhole5

dkfreebird
dkfreebird Posts: 1,186
edited August 2014 in Vintage Speakers
I have been working on the upgrades on my 2.3tl's and am ready to install the blackhole5.Do I need to make the strips for the mids the same length for inner and outer mids or just long enough to cover to the bottom of each row?
2 Channel
Polk 1.2tl's Modded with dreadnought
Musical Fidelity M6Si
North Star Intenso Dac
Auralic Aries Mini Streamer
Oppo 103
Pangea PC
Wireworld Equinox 7 interconnects
Wireworld Equinox 7 Speaker Cables and Jumpers

Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
Post edited by dkfreebird on
· Share on FacebookShare on Twitter

Comments

  • Toolfan66
    Toolfan66 Posts: 17,241
    edited August 2014
    Just enough to go from top driver to bottom driver, 4" wide strips..
    · Share on FacebookShare on Twitter
  • dkfreebird
    dkfreebird Posts: 1,186
    edited August 2014
    Thanks,the reason I was asking is so I can stretch the sheet with as little as waste as possible.What about the sidewalls?
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,241
    edited August 2014
    I put 2" wide strips on the side same length, but in all honesty I don't think it's needed, the back wall is where it's at..
    · Share on FacebookShare on Twitter
  • westmassguy
    westmassguy Posts: 6,850
    edited August 2014
    Don't overdo it. 4" wide strips on the back wall only, directly behind the woofers. From the top of the top woofer opening, to the bottom of the bottom woofer opening.
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
    · Share on FacebookShare on Twitter
  • dkfreebird
    dkfreebird Posts: 1,186
    edited August 2014
    Got it,I think I have got it to where I need to be for now on the upgrades,as much as money allows,except for the rings which I hear might be coming soon.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
    · Share on FacebookShare on Twitter
  • dkfreebird
    dkfreebird Posts: 1,186
    edited August 2014
    And thanks Dave for the help on the crossover upgrades,I got kinda nervous when they didn't show up in tracking when I shipped them.
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
    · Share on FacebookShare on Twitter
  • westmassguy
    westmassguy Posts: 6,850
    edited August 2014
    No worries
    Home Theater/2 Channel:
    Front: SDA-2ATL forum.polkaudio.com/discussion/143984/my-2as-finally-finished-almost/p1
    Center: Custom Built forum.polkaudio.com/discussion/150760/my-center-channel-project/p1
    Surrounds & Rears: Custom Built forum.polkaudio.com/discussion/151647/my-surround-project/p1
    Sonicaps, Mills, RDO-194s-198s, Dynamat, Hurricane Nuts, Blackhole5
    Pioneer Elite VSX-72TXV, Carver PM-600, SVS PB2-Plus Subwoofer

    dhsspeakerservice.com/
    · Share on FacebookShare on Twitter
  • dkfreebird
    dkfreebird Posts: 1,186
    edited August 2014
    Dskip I will have some extra,I got a 24x27 sheet and it looks like I will only use a little of it and you are welcome to what you need of the rest,I will let you know what I have left this weekend
    2 Channel
    Polk 1.2tl's Modded with dreadnought
    Musical Fidelity M6Si
    North Star Intenso Dac
    Auralic Aries Mini Streamer
    Oppo 103
    Pangea PC
    Wireworld Equinox 7 interconnects
    Wireworld Equinox 7 Speaker Cables and Jumpers

    Backups 2.3tl, Crs+ pin/blade with stands.Monitor 5 peerless,Monitor 4 peerless,Polk R200,McCormack Dna 0.5 Deluxe McCormack Dna 1,Dared Sl 2000A,Dayens Ampino Rogue Magnum 66 pre
    · Share on FacebookShare on Twitter
  • drumminman
    drumminman Posts: 3,396
    edited August 2014
    If you don't need the rest Dskip I could use some to do my newly acquired CRS+'s.
    "Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
    · Share on FacebookShare on Twitter