Tweeter terminal connector in CS400i

HTguru1982

I had to swap out tweeters in my CS400i and when pulling off the negative connector, it snapped on me. So it looks like I need a .110 crimp on or soldier connector.

I need something similar to this but no one around here carries them, at least not in the size I need: http://www.radioshack.com/product/index.jsp?productId=12547293&clickid=prod_cs

Can they ordered from Polk?

F1nut

Try Parts Express.

heartystatue

Sounds crazy but I would try Napa.

HTguru1982

Thanks but I already looked. The connector that they have is too long. The tweeter in the CS400i sits in a recess that unfortunately isn't very deep which is why I'm having trouble finding an appropriate connector. Polk uses smaller 90 degree connectors that allow the tweeter to sit comfortably in that recess. Everything I've looked is simply too large.

WLDock

I think this is what you are after .110 90 degree angled flag terminals:

http://www.digikey.com/scripts/dksearch/dksus.dll?pv298=375&FV=fff40016%2Cfff8041a%2C10600008&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

http://www.newark.com/te-connectivity-amp/62336-1/terminal-flag-rcpt-22-18-crimp/dp/05H9519

HTguru1982

Thanks WLDock, that should work. I had been looking for the 90 degree angled terminals but couldn't find any in that size. Thanks!

WLDock wrote: »

I think this is what you are after .110 90 degree angled flag terminals:

http://www.digikey.com/scripts/dksearch/dksus.dll?pv298=375&FV=fff40016%2Cfff8041a%2C10600008&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

http://www.newark.com/te-connectivity-amp/62336-1/terminal-flag-rcpt-22-18-crimp/dp/05H9519