Dimensions for the PSW505 Powered Subwoofer?

BlackHawk
BlackHawk Posts: 16
edited March 2013 in Speakers
Hi. The dimensions for the PSW505 Powered Subwoofer located at the link below...

http://www.polkaudio.com/products/psw505

Height 16 1/8" (40.96cm)
Width 15 1/8" (38.42cm)
Depth 18 3/16" (46.20cm)

Is the 16 1/8" height stated with or without the 4 little feet/legs/pegs on the bottom? I ask because I have a height situation where this may be placed. Can the pegs/feet be taken off and if so does it have an effect on the sound? Are there any known issues, common problems with this sub? Thank you.
Post edited by BlackHawk on
· Share on FacebookShare on Twitter

Comments

  • BlackHawk
    BlackHawk Posts: 16
    edited March 2013
    bump
    · Share on FacebookShare on Twitter
  • Tbone289
    Tbone289 Posts: 661
    edited March 2013
    I'll try to remember to measure mine for you when I get home.
    2.1: PC>Schiit Gungnir MB>Schiit Freya Noval>NAD C-270>Ascend Acoustics Sierra-1, HSU STF-2 5.1: HDMI Bitstream>Denon AVR-1910>polkaudio RTE55, CS350-LS, RT3, HSU STF-2, Visio M55-F0
    · Share on FacebookShare on Twitter
  • amgala
    amgala Posts: 111
    edited March 2013
    Tbone289 wrote: »
    I'll try to remember to measure mine for you when I get home.

    TMI...

    J/K, I was going to post almost word-for-word the same thing!
    Front Speakers: Polk Audio LSi15 x 2
    Center Speaker: Polk Audio LSiC
    Rear Speakers: Polk Audio LSiF/X x 2
    Subwoofers: Polk Audio PSW505 x 2
    AVR: Denon AVR-3313CI
    Amp: Emotiva XPA-5
    · Share on FacebookShare on Twitter
  • BlackHawk
    BlackHawk Posts: 16
    edited March 2013
    Tbone289 wrote: »
    I'll try to remember to measure mine for you when I get home.

    That would be great. Thank you very much.
    · Share on FacebookShare on Twitter
  • BlackHawk
    BlackHawk Posts: 16
    edited March 2013
    Height with and without feet/pegs would be great. Thank you.
    · Share on FacebookShare on Twitter
  • Tbone289
    Tbone289 Posts: 661
    edited March 2013
    amgala wrote: »
    TMI...

    J/K, I was going to post almost word-for-word the same thing!


    LOL. I didn't even catch that.

    I'm more familiar with those dimensions than the actual dimensions of my PSW505 though and, if required, I wouldn't have to wait to go home to provide them!
    2.1: PC>Schiit Gungnir MB>Schiit Freya Noval>NAD C-270>Ascend Acoustics Sierra-1, HSU STF-2 5.1: HDMI Bitstream>Denon AVR-1910>polkaudio RTE55, CS350-LS, RT3, HSU STF-2, Visio M55-F0
    · Share on FacebookShare on Twitter
  • Tbone289
    Tbone289 Posts: 661
    edited March 2013
    I measure the height without feet to be 15 3/4"; 16 1/8" with feet. I don't know how the feet are mounted--there are no visible screws. I would guess that the plastic feet just snap into recessed holes in the bottom of the sub.

    There are no issues with the PSW505, and it's a very good HT sub for the price. I would want to use some type of small feet on the bottom. Maybe some shallow stick-on rubber feet or something.
    2.1: PC>Schiit Gungnir MB>Schiit Freya Noval>NAD C-270>Ascend Acoustics Sierra-1, HSU STF-2 5.1: HDMI Bitstream>Denon AVR-1910>polkaudio RTE55, CS350-LS, RT3, HSU STF-2, Visio M55-F0
    · Share on FacebookShare on Twitter
  • BlackHawk
    BlackHawk Posts: 16
    edited March 2013
    Thank you very much Tbone, your help is greatly appreciated!
    · Share on FacebookShare on Twitter