TL350 wall mounts / cable

raymate
raymate Posts: 26
edited March 2013 in Speakers
Hi,

Finally got all my system together now, TL350 + PSW108 and Denon AVR-2113

Setup the fronts and sub and now onto the rear speakers.

I want to wall mount the two at the back and need some recommendations for brackets, I would like to be able to angle them in up/down and left/right so something that may work with this.

The place I want to attach them I don't seem to have a stud so they may be going straight into drywall (not the best idea) but I may have no choice.

My dealer said I can use 16 awg cable as I'm running about 50 feet to each speaker, but I may bump it to 14 awg Just to get the front speakers running he sold me some 16 awg for the fronts and it seems OK.

Would I notice any difference uping the fronts to 14

Im going to use cordmate or cordmate II to hide the cable (dont want to start feeding it into walls)

Thanks
TL350s + PSW108 + Denon AVR-2113ci
Post edited by raymate on
· Share on FacebookShare on Twitter

Comments

  • leela222
    leela222 Posts: 28
    edited February 2013
    I got a cheap pair on ebay for 8 bucks and they are great. I have my TL2s mounted from the ceiling angled down.
    My H/T:

    AVR: Pioneer VSX-921-K
    Front L/R: Sony Towers SS-MF600H (will be upgraded to M70's or 75T's)
    Center: Polk TL2
    Surrounds: Polk TL2
    Rear Surrounds: Sony satellites from old HTIB (will be upgraded to TL2)
    Subwoofer: Sony from old HTIB (will be upgraded to DSWPRO550wi)
    · Share on FacebookShare on Twitter
  • leela222
    leela222 Posts: 28
    edited February 2013
    2013-02-22_12-34-56_810.jpg
    My H/T:

    AVR: Pioneer VSX-921-K
    Front L/R: Sony Towers SS-MF600H (will be upgraded to M70's or 75T's)
    Center: Polk TL2
    Surrounds: Polk TL2
    Rear Surrounds: Sony satellites from old HTIB (will be upgraded to TL2)
    Subwoofer: Sony from old HTIB (will be upgraded to DSWPRO550wi)
    · Share on FacebookShare on Twitter
  • raymate
    raymate Posts: 26
    edited February 2013
    Thanks for the picture, I shall try and track them down, they look like just the thing I need.
    TL350s + PSW108 + Denon AVR-2113ci
    · Share on FacebookShare on Twitter
  • leela222
    leela222 Posts: 28
    edited February 2013
    You're welcome. And you can swivel them too! I am also using 16 gauge speaker wire.
    My H/T:

    AVR: Pioneer VSX-921-K
    Front L/R: Sony Towers SS-MF600H (will be upgraded to M70's or 75T's)
    Center: Polk TL2
    Surrounds: Polk TL2
    Rear Surrounds: Sony satellites from old HTIB (will be upgraded to TL2)
    Subwoofer: Sony from old HTIB (will be upgraded to DSWPRO550wi)
    · Share on FacebookShare on Twitter
  • leela222
    leela222 Posts: 28
    edited February 2013
    You're welcome. And you can swivel them too! I am also using 16 gauge speaker wire.
    My H/T:

    AVR: Pioneer VSX-921-K
    Front L/R: Sony Towers SS-MF600H (will be upgraded to M70's or 75T's)
    Center: Polk TL2
    Surrounds: Polk TL2
    Rear Surrounds: Sony satellites from old HTIB (will be upgraded to TL2)
    Subwoofer: Sony from old HTIB (will be upgraded to DSWPRO550wi)
    · Share on FacebookShare on Twitter
  • raymate
    raymate Posts: 26
    edited March 2013
    Fond the mounts you have, should be with me today, so this weekend I can get it all set up :razz:
    TL350s + PSW108 + Denon AVR-2113ci
    · Share on FacebookShare on Twitter
  • leela222
    leela222 Posts: 28
    edited March 2013
    Awesome! Easy to mount and very flexible! Can't wait to get another pair when I get another set of the TLs.
    My H/T:

    AVR: Pioneer VSX-921-K
    Front L/R: Sony Towers SS-MF600H (will be upgraded to M70's or 75T's)
    Center: Polk TL2
    Surrounds: Polk TL2
    Rear Surrounds: Sony satellites from old HTIB (will be upgraded to TL2)
    Subwoofer: Sony from old HTIB (will be upgraded to DSWPRO550wi)
    · Share on FacebookShare on Twitter