Scratch and dent vintage polk, round terminal cup aluminum plates

VR3
VR3 Posts: 28,793
edited April 2013 in For Sale (FS) Classifieds
So that one time run of Polk plates for you crazies did not go as smooth as we could have hoped but the good news is I guess is that means there are more for you guys in a way even if they are scratched up a little.

These are separated into A/B groups. The letter and number of a SET of plates are pictured below. You will receive the plates in the picture.

I will go ahead and tell you just to be on the safe side, THESE PLATES HAVE SCRATCHES, the B plates have scratches, marring, cuts, dents.

ALL prices are + paypal 3.5% and shipping, to ship the plates should be $6.50 a pair. If you want multiple pairs, it will still be $6.50 but if for some reason it cost more we will have to collect more shipping post shipment.

All plates except two are cut for a NL2 neutrik SDA connection, if you need these connections please take that portion to email - Vr3Mods@gmail.com

You can have these drilled for four or two binding post.

The only kicker with this order is the shop also did not include the template so I can drill the holes. I will receive the template in the next batch for the original idea behind these plates meaning these plates will ship in the next 10 to 15 business days.

Here is how the pricing will work -

Polk "A" Plates - $44.00 a set

Polk "B" Plates - $36.00 a set

Vr3 "A" Plates - $30.00 a set - Still fairly scratched up

Vr3 "B" Plates - $20.00 a set (HEAVY DAMAGE, were used as tests to try to correct the issues and quality control) These are the ones that are not marked in the picture)

Polk "A" Closed (No NL2) Plates - $44.00 a set

Please let me know if you have any questions.

Plates Available -

Polk -
A
A1
A2
A3
A4
A5
A6
A7

B1
B2
B3
B4
B5
B6

AC1

Vr3 -
A
B
- Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
Post edited by VR3 on
· Share on FacebookShare on Twitter

Comments

  • VR3
    VR3 Posts: 28,793
    edited February 2013
    Plate sets A6 and A7 have been spoken for.

    This leaves -

    Polk -
    A
    A1
    A2
    A3
    A4
    A5

    B1
    B2
    B3
    B4
    B5
    B6

    AC1

    Vr3 -
    A
    B
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited February 2013
    No interest in the round plates...

    Just a FWIW, if you do not want a damaged plate - I am down for going outside with the sander and sanding these bad boys down... they do not have to say Polk! :)
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • cnh
    cnh Posts: 13,284
    edited February 2013
    I don't know, unless you are really "anal", most of those look to be in very good shape as is!

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited February 2013
    A1 has been spoken for -

    This leaves -

    Polk -
    A
    A2
    A3
    A4
    A5

    B1
    B2
    B3
    B4
    B5
    B6

    AC1

    Vr3 -
    A
    B
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited February 2013
    Bump!

    I can drill these to accommodate Cardas and Vampire post as well! :)
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • michael1947
    michael1947 Posts: 775
    edited February 2013
    Please put me down for VR3 A which should be 30 + 6.50..right?
    Main Family Room: Sony 46 LCD, Sony Blue Ray, Sony DVD/VCR combo,Onkyo TXNR 708, Parasound 5250,
    Polk SDS-SRS with mods, CSI 5 center + Klipsch SC2, Polk RT2000P rears, Klipsch KG 1.5's sides, Polk Micro Pro 1000, Polk Micro Pro 2000, Polk SW505, Belkin PF60, Signal Cable Classics,Monster IC's, 2 15 amp circuits & 1 20 amp circuit.

    Living Room: Belkin PF60, Parasound HCA2200, MIT ProlineEXP balanced IC's,Emotiva XDA-1 DAC/Pre,Emotiva ERC2 transport,MIT AVT2, Polk LSI 9's.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited February 2013
    Hey Michael

    I just now! saw this...

    Shoot me an email at Vr3Mods@gmail.com

    Polk -
    A
    A2
    A3
    A4
    A5

    B1
    B2
    B3
    B4
    B5
    B6

    AC1

    Vr3 -
    B
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited February 2013
    Gentleman! :-P

    Mid week bump!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited March 2013
    Here is what is still available...

    Polk Engraved -
    A2
    A3
    B2
    B6
    B5
    A5
    B3
    B4

    VR3 engraved -
    B
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited March 2013
    A2 SOLD -

    Here is current availability -

    Polk Engraved -
    A3
    B2
    B6
    B5
    A5
    B3
    B4

    VR3 engraved -
    B

    Thanks!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited March 2013
    Here is current availability -

    Polk Engraved -
    B2
    B5
    B3
    B4

    VR3 engraved -
    B

    Thanks!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited March 2013
    I'm not sure what is for what, so I will ask. Do you have a set to fit 1.2TL's??
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited March 2013
    They all fit a 1.2TL :)

    But you will have to change over the SDA to a NL2 connection which I have available...

    Thanks!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited March 2013
    Mine are currently set up with 6 connectors. 4 are for amp, 2 for sad cable. What do I need to do??
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited March 2013
    Mine are currently set up with 6 connectors. 4 are for amp, 2 for sad cable. What do I need to do??
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited March 2013
    vmaxer wrote: »
    Mine are currently set up with 6 connectors. 4 are for amp, 2 for sad cable. What do I need to do??

    Please let me know as I really need to replace the stock cracked ones.......
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited April 2013
    I will take B2, pm in a min.
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited April 2013
    What is currently left -

    Polk Engraved -
    B5
    B3
    B4

    VR3 engraved -
    B

    Thanks!
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • vmaxer
    vmaxer Posts: 5,117
    edited April 2013
    vmaxer wrote: »
    I will take B2, pm in a min.

    I received these a couple days ago, look better than the pic to me.. Very pleased. Thank you much!!
    Pio Elete Pro 520
    Panamax 5400-EX
    Sunfire TGP 5
    Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
    PS Audio GCPH phono pre
    Sunfire CG 200 X 5
    Sunfire CG Sig 405 X 5
    OPPO BDP-83 SE
    SDA SRS 1.2TL Sonicaps and Mills
    Ctr CS1000p
    Sur - FX1000 x 4
    SUB - SVS PB2-Plus

    Workkout room:
    Sony Bravia XBR- 32-Inch 1080p
    Onkyo TX-DS898
    GFA 555
    Yamaha DVD-S1800BL/SACD
    Ft - SDA 1C

    Not being used:
    RTi 38's -4
    RT55i's - 2
    RT25i's -2, using other 2 in shop
    LSI 15's
    CSi40
    PSW 404
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,793
    edited April 2013
    Glad you liked them!!

    Thanks again
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter